Access exclusive offers, news and more.
Thanks for signing up.You'll be the first to receive updates about new collections, top brands, and exclusive products.
1000W RMS M-Series Monoblock Class D Marine Subwoofer Amplifier
• RMS: 600W x 1 @ 4 ohms, 1000W x 1 @ 2 ohms
• Total RMS Power: 1000W
• Unregulated MOSFET switching type
• Dual-Range Differential Balanced Input Section
• Advanced Rollback Protection
• NexD Switching Technology
• RMS: 600W x 1 @ 4 ohms, 1000W x 1 @ 2 ohms
• Total RMS Power: 1000W
• Unregulated MOSFET switching type
• Dual-Range Differential Balanced Input Section
• Advanced Rollback Protection
• NexD Switching Technology
This potent monoblock subwoofer amplifier employs JL Audio's high-speed NexD switching design to achieve unprecedented efficiency and amazing power output in a very compact chassis. The M1000/1v2 is capable of delivering 1000 Watts of continuous power into a 2 ohm load (14.4V, 1% THD), making it a great choice to drive higher power subwoofer systems.
Designed specifically for subwoofer applications, the M1000/1v2 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz and a defeatable infrasonic filter (30 Hz, 24 dB/oct.). With the addition of an HD-RLC remote level control (sold separately), the amplifier's subwoofer output level or master volume for all channels can be directly controlled from the helm. The M1000/1v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels.
Should your JL Audio amplifier reach an unsafe operating temperature, a special circuit rolls back peak power output, without changing gain, until the amplifier cools down to a safe operating temperature. The red "Thermal" LED will light to indicate this condition has been reached. Once the amplifier cools down, the circuit restores full peak power output and the red "Thermal" indicator reverts to its normal state. The operation of Advanced Rollback Protection is inaudible in most cases, but it ensures that your music keeps on playing, even under the most demanding conditions.
JL Audio have taken the simple fixed PWM approach - found in almost all common amplifiers - and enhanced it with a very high switching frequency: 400 kHz, which is exponentially higher than most Class D Full-range amplifiers. This pushes the amplifier's bandwidth to a much higher frequency than seen before, and still provide minimal distortion and improved efficiency, while keeping typically bulky circuity more compact. Your speakers will reward you with crisp, clear performance. The bottom line is simply great audio: clean, powerful and reliable.
Note from JL Audio: While this amplifier is specially designed for marine applications, it is not waterproof and it should not be mounted where it is likely to get wet.
Check out the JL Audio M1000/1v2 Owner's ManualInternal Product ID:
97968
5 star |
|
0% |
4 star |
|
0% |
3 star |
|
0% |
2 star |
|
0% |
1 star |
|
0% |
Durability |
|
0 |
Value |
|
0 |
Features |
|
0 |
Design |
|
0 |
Usability |
|
0 |
4 Gauge 100% Pure Crystal-Oxygen Free Copper 2-Channel Amplifier Wiring Kit
$179.99
Remote Level Control and Cable for Select JL Audio HD, XD, MHD and M Series Amplifiers
$54.99
Controls bass level and frequency and monitor voltage
$29.99
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
$7.99
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
$149.00
16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors
$18.99
Comes with everything you need to upgrade your power and ground wire.
$99.99
Great for isolating a second batter making it dedicated to the stereo system
$14.99
Does not create a voltage drop to the second battery like conventional isolators
$65.99
Make installation a breeze with the XBTU
$16.99
No-fail termination and current flow, it helps keep your system protected and running smoothly
$13.99
Great for amplifiers that do not accept a large gauge power wire
$9.99
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
$1.99
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
$2.99
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
$9.99
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors
$12.99
Best selling similar products
• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H
(28)
$214.99
• 150 watts x 4 channel @ 4 ohms
• 250 watts x 4 channel @ 2 ohms
• Bridged: 500 watts x 2 channel @ 4 ohms
• Total RMS Power: 1000 watts
• CEA-2006 Compliant
• Class D 2 ohms Stable 4-Channel-Channel Amplifier
(14)
$279.99
• 100 Watts RMS x 6 @ 4 ohms
• 150 Watts RMS x 6 @ 2 ohms
• CEA-2006 Compliant
• Weatherproof Amplifier
• Micro Amp
• 12.9"W x 4.4"L x 1.7"H
(3)
$299.99
This item is frequently compared to these items
JL Audio XD-CLRAIC2-SW Speaker Wire to RCA Cable
• 2-Channel Speaker Wire to RCA Adaptor for High-Level Signal Connection to Amplifiers
• Left and Right Channel Male RCA Plugs to Parallel Speaker Cable
• Satin Black Jacket
(6)
$17.99
JL Audio XD-PCS4-2B 4 Gauge Dual Amplifier Kit
• 4 Gauge Dual Amplifier Installation Power Kit
• Designed for Systems Ranging from 300W to 700W
• True to Gauge Power and Ground Cable
• Pure OFC Copper
• Fine-Strand Construction
(2)
$279.99
2-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
4 Gauge 100% Pure Crystal-Oxygen Free Copper 2-Channel Amplifier Wiring Kit
4 Gauge OFC Power Amplifier Installation Kit
4 Gauge Premium Amplifier Power Connection Kit
Remote Level Control and Cable for Select JL Audio HD, XD, MHD and M Series Amplifiers
Controls bass level and frequency and monitor voltage
Universal Remote Level Bass Control
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
2-Channel Line Out Converter
2 Channel Line Out Converter with xBOOST
Looking to fine tune the bass in your vehicle? Look no further
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Comes with everything you need to upgrade your power and ground wire.
680 Amp SPP Series Dry Cell Battery with Protective Steel Case
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block
1.0 Farad Capacitor with Digital Red Display for up to 1000W Max
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Accepts 4 gauge or 8-gauge wire
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
Belva BAGUH2 AGU Fuse Holder
4/8 Gauge AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
5 Pack of Black 4 Gauge Ring Terminals
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors