Expert Service 1-661-257-9993 [Hours]

Planet Audio BB2500.1 OPEN BOX COMPLETE

2500W Max Big Bang Series Monoblock Digital Class D Car Amplifier

We apologize

This item has been discontinued

Item Added to Cart

Planet Audio BB2500.1 OPEN BOX COMPLETE

2500W Max Big Bang Series Monoblock Digital Class D Car Amplifier


Keep Shopping


80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver


AudioControl Epicenter-InDash

If you want the best bass possible and a way to measure how loud your system is playing


4000 Series 2-Channel RCA Cable

17 ft. of 2-Channel 4000 Series RCA Interconnect Cable designed for the Audiophile



Don't see the accessory you're looking for?
View all available accessories for the Planet Audio BB2500.1 OPEN BOX COMPLETE.

Get FAST answers from customers ASK a Question See questions answers

Item Condition: Open Box Complete

  • Box torn open
    • General Features:

      • Big Bang Series Monoblock Class D Car Amplifier
      • Max Power Rating:
        • 4 ohms: 700 watts x 1 chan.
        • 2 ohms: 1100 watts x 1 chan.
        • 1 ohm: 2500 watts x 1 chan.
      • Pulse Width Modulated MOSFET power supply
      • LED power (green) and protect (red) indicators
      • Variable Bass Boost (0 to +18 dB bass boost)
      • Wired bass level control included
      • Soft start turn-on
      • Bridgeable outputs
      • Tri-mode capable
      • Illuminated logo
      • Heavy duty set-screw style terminals
      • Mono channel operation
      • Preamp RCA outputs to daisy chain multiple amps
      • 2-way protection circuitry (thermal and speaker short protection)
      • Dual speaker terminals simplify the hookup of multiple speakers
      • Heavy duty aluminum alloy heat-sink
      • Variable low-pass filter (50-250 Hz)
      • Variable subsonic filter (10-50 Hz)
      • 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
      • Dimensions: 10-1/4"W x 6-8/9"L x 2-3/10"H
      • Authorized Internet Dealer
      • 1-year Manufacturer's Warranty

    Amplifier Specifications

    Amplifier Series
    This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
    Big Bang (Planet Audio)
    Amplifier Class

    An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

    Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

    Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

    Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

    Number of Channels
    Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
    1 - Mono
    Total Peak Power Output
    The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

    It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

    The RMS power rating is more accurate, and we recommend using it for product comparison.

    2500 watts
    Maximum Input Gauge Size
    This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
    4 AWG
    Minimum Impedance Unbridged
    The lowest impedance the amplifier will handle when it is not bridged.
    1 ohms
    Minimum Impedance Bridged
    The lowest impedance the amplifier will handle when it is bridged.
    Not Bridgeable
    Speaker Level Inputs
    Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
    Preamp Outputs
    Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
    1 pair
    Built-in Crossover

    A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

    When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

    Low-Pass (LP)
    Low-Pass Crossover Frequency
    The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

    The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

    50 - 250 Hz
    Subsonic Filter
    Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
    10 - 50 Hz
    Signal-to-Noise Ratio
    This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
    100 dB
    Bass Boost
    The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
    0 - 18 dB
    Bass/Gain Remote
    If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
    Fan Cooled
    A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
    Fuse Rating
    The amperage and the number of fuse(s) an amp requires.
    40A x 3 
    Some amplifiers can be "strapped" together in order to increase the output of a single audio channel. These amplifiers feature RCA preamp outputs, allowing you to pass the signal directly from one amp to the other to ensure consistency.
    CEA-2006 Compliant
    Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
    • RMS Power
    • Signal-to-Noise Ratio

    This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

    Hi-Res Audio Compatible
    This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.

    Warranty and Return Policy

    Parts Warranty Duration
    1 year
    Labor Warranty Duration
    1 year
    Warranty Provider

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    4 Star
    3 Star
    2 Star
    1 Star

    Average Attribution Rating

    Accessory Tools and Products

    Accessories added


    80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver

    Your Price $12.99

    PAC LP7-2

    L.O.C. PRO Series 2-Channel Line Output Converter with Remote Turn On

    Your Price $21.95

    AudioControl LC2i

    2 Channel Line Out Converter with AccuBASS & 5-year warranty*!

    Your Price $75.99

    AudioControl Epicenter-InDash

    If you want the best bass possible and a way to measure how loud your system is playing

    Your Price $169.99


    Looking to fine tune the bass in your vehicle? Look no further

    Your Price $59.99

    4000 Series 2-Channel RCA Cable

    17 ft. of 2-Channel 4000 Series RCA Interconnect Cable designed for the Audiophile

    Your Price $16.99

    NVX XWS1625 16 AWG Speaker Wire

    25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

    Your Price $17.99

    Belva BBSW167 16 AWG Speaker Wire

    16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

    Your Price $12.99

    NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

    Comes with everything you need to upgrade your power and ground wire.

    Your Price $69.99

    Belva BBG3KT CCA 1/0 Gauge Big Three Kit

    Features everything needed to upgrade factory power and ground wire.

    Your Price $39.99

    XS Power BIG3XS 100% OFC 1/0 Gauge Big 3 Upgrade Kit

    1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

    Your Price $104.99

    270 Amp G Series Alternator for Select 1994-2012 GM Vehicles

    Most Popular! 270+ amps at anything above 1800 rpm engine speed!

    Your Price $448.89

    240 Amp S Series Alternator for Select 1992-2003 Dodge/Jeep Vehicles

    240 Amp cutting edge 6 phase hairpin epoxy reinforced stator technology

    Your Price $399.00

    240 Amp L Series Alternator for Select 1963-1985 GM Vehicles

    Specifically designed to fit in tight spaces

    Your Price $399.00

    250 Amp Alternator for Select 2003-2008 Ford/Lincoln/Mercury Vehicles

    Cutting edge 6 phase hairpin stator technology with Twin internal rectifier plates with finned heat sink

    Your Price $399.99

    240 Amp S Series Alternator for Select 1999-2006 Jeep Vehicles

    6 phase alternators use less horsepower per Kilowatt than conventional 3 phase alternators

    Your Price $399.00

    240 Amp S Series Alternator for 2011 Toyota Corolla

    Ultra precision balanced rotor with oversized charge post ensure sturdy cable connections

    Your Price $399.99

    240 Amp S Series Alternator for 2006-2011 Honda Civic

    15% more efficient than typical alternators

    Your Price $549.99

    370 Amp E Series Alternator with Black Finish for Select 1994 - 2003 GM

    WOW 370 AMPS! Elite series offers the highest possible amperage

    Your Price $699.00

    320 Amp S Series Alternator for Custom and Racing Applications

    Great for a Custom Project

    Your Price $499.00

    Kinetik HC600-BLU

    BLU Series 600 Watt 12V High Current AGM Car Audio Power Cell

    Your Price $52.99

    XS Power D545

    12-Volt Deep Cycle AGM Power Cell with 800 Max Amps

    Your Price $109.99


    Perfect for safely troubleshooting and testing audio systems

    Your Price $19.99

    Scosche TK12

    The perfect kit for installing a car stereo and amplifier for the first time

    Your Price $20.99

    Universal Wire Puller

    Make your installation less of a chore and save yourself the stretch

    Your Price $7.99

    8 Gauge Ring Terminals, 5/16" Opening

    Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

    Your Price $1.99

    PRO Series Classic Short GM Battery Post Shoc-Krome

    Side post battery adapter for GM type batteries (Positive or Negative)

    Your Price $4.99

    PRO Series Classic Long GM Battery Post w/ Shoc-Krome Plating

    Side post battery adapter for GM type batteries (Positive or Negative)

    Your Price $6.99

    200 Amp Relay Isolator (BIR200)

    Great for isolating a second batter making it dedicated to the stereo system

    Your Price $44.99

    500 Amp Relay Isolator (BIR500)

    Does not create a voltage drop to the second battery like conventional isolators

    Your Price $49.99

    120 Amp 4-Post Battery Isolator

    Prevents primary battery discharge and extends battery life

    Your Price $69.97

    240 AMP 3-Post Battery Isolator

    Prevents primary battery discharge and extends battery life

    Your Price $124.99

    World's Smallest AFS / Mini ANL Fuse Holder

    Accepts 4 gauge or 8-gauge wire

    Your Price $12.99

    ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

    No-fail termination and current flow, it helps keep your system protected and running smoothly

    Your Price $19.99

    4 Pack of 100 Amp Nickel-Plated MANL Fuse

    Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

    Your Price $3.99

    2 Pack of 100 Amp Nickel-Plated ANL Fuse

    ANL 100A Nickel plated for better power transfer

    Your Price $2.99

    2 Pack of 200 Amp Nickel-Plated ANL Fuse

    Two fuses per order. High quality 200 Amp ANL Fuses

    Your Price $2.99

    Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

    Great for amplifiers that do not accept a large gauge power wire

    Your Price $5.99

    Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

    Great for amplifiers that do not accept large gauge power wire

    Your Price $6.95

    Hide answersShow all answers | Sort by
    No questions have been asked about this item. Be the first!

    Product Summary


    Model Number




    Internal SKU


    Internal Product ID


    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: Planet Audio BB2500.1 OPEN BOX COMPLETE