Garage
Shop

Discontinued Pioneer Tweeters

Experience crystal-clear highs with Pioneer’s finely crafted tweeters.

Loading...
Filters
Question Mark Icon of Question Mark
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
Question Mark Icon of Question Mark
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Question Mark Icon of Question Mark
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Question Mark Icon of Question Mark
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
Question Mark Icon of Question Mark
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
  Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
Question Mark Icon of Question Mark
If the speaker or tweeter is flush mountable, then it can be installed flush to the mounting surface.

When installing a flush mount tweeter, make sure that there is enough room behind the mounting surface for the tweeter and magnet. Check the mounting depth with your specific vehicle.

Question Mark Icon of Question Mark
If the speaker or tweeter is surface mountable, then it can be installed to be raised above the mounting area.

When installing a surface mountable tweeters, make sure that there are no obstructions that will prevent the tweeter from being installed correctly.

Question Mark Icon of Question Mark
If the speaker or tweeter is able to be angle mounted, then the installed tweeter can be positioned at an angle. An angle mounted tweeter can improve the audible sound quality of your system.

When installing a angle mountable tweeters, make sure that there are no obstructions that will prevent the tweeter from being installed correctly.

Question Mark Icon of Question Mark
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

Pioneer TS-S20

200W Peak (50W RMS) 3/4" Component Hard Dome Tweeters

Go to item page Right Arrow Icon of Right Arrow

200W Peak (50W RMS) 3/4" Component Hard Dome Tweeters

• 100 Watts Max Each, 25 Watts RMS Each
• 3/4" hard dome Tweeter
• 8 Ohms Impedance
• Sensitivity: 92dB

Promo Savings Icon

• 100 Watts Max Each, 25 Watts RMS Each
• 3/4" hard dome Tweeter
• 8 Ohms Impedance
• Sensitivity: 92dB

Pioneer TS-B350PRO

3-1/2" High Efficiency PRO Series Bullet Car Tweeter

Go to item page Right Arrow Icon of Right Arrow

3-1/2" High Efficiency PRO Series Bullet Car Tweeter

3-1/2" PRO Series Car Tweeters • Aluminum Tweeter Construction • 250W Max • 100W RMS • 4 ohms Impedance • In-Line Crossover • High-Temperature Voice Coil • Aggresive Magnet

3-1/2" PRO Series Car Tweeters • Aluminum Tweeter Construction • 250W Max • 100W RMS • 4 ohms Impedance • In-Line Crossover • High-Temperature Voice Coil • Aggresive Magnet

Pioneer TS-T15 (Open Box, Complete)

240W Peak (120W RMS) 3/4" Soft Dome Tweeters

Go to item page Right Arrow Icon of Right Arrow

240W Peak (120W RMS) 3/4" Soft Dome Tweeters

• 120W Max • 40W RMS • 3/4" rubber polyester soft dome tweeter • Flush and surface mounting capabilities • -6dB/oct. Capacitor Included for Tweeter Protection • Poly-Imide Voice Coil Bobbin

• 120W Max • 40W RMS • 3/4" rubber polyester soft dome tweeter • Flush and surface mounting capabilities • -6dB/oct. Capacitor Included for Tweeter Protection • Poly-Imide Voice Coil Bobbin

Pioneer TS-T110 (Open Box, Complete)

240W Peak (120W RMS) 7/8-Inch Hard-Dome Tweeter (Pair)

Go to item page Right Arrow Icon of Right Arrow

240W Peak (120W RMS) 7/8-Inch Hard-Dome Tweeter (Pair)

• 120W Max • 40W RMS • 7/8" Polypropylene/Titanium Hard Dome • Surface and flush mount compatible • Strontium and Magnetic Fluid structure

• 120W Max • 40W RMS • 7/8" Polypropylene/Titanium Hard Dome • Surface and flush mount compatible • Strontium and Magnetic Fluid structure

Pioneer TS-T110 (Open Box, Complete)

240W Peak (120W RMS) 7/8-Inch Hard-Dome Tweeter (Pair)

Go to item page Right Arrow Icon of Right Arrow

240W Peak (120W RMS) 7/8-Inch Hard-Dome Tweeter (Pair)

• 120W Max • 40W RMS • 7/8" Polypropylene/Titanium Hard Dome • Surface and flush mount compatible • Strontium and Magnetic Fluid structure

• 120W Max • 40W RMS • 7/8" Polypropylene/Titanium Hard Dome • Surface and flush mount compatible • Strontium and Magnetic Fluid structure

Pioneer TS-T110-OPEN BOX

7/8" Hard Dome Tweeters

Go to item page Right Arrow Icon of Right Arrow

7/8" Hard Dome Tweeters

• 120W Max • 40W RMS • 7/8" Polypropylene/Titanium Hard Dome • Surface and flush mounting • Strontium and Magnetic Fluid structure

• 120W Max • 40W RMS • 7/8" Polypropylene/Titanium Hard Dome • Surface and flush mounting • Strontium and Magnetic Fluid structure

Pioneer Premier TS-T3PRS

1-1/4" PRS Premier Reference Series Soft Dome Tweeters

Go to item page Right Arrow Icon of Right Arrow

1-1/4" PRS Premier Reference Series Soft Dome Tweeters

1-1/4" Premier Series Component Tweeters • 200W Max • 60W RMS • Polyester soft dome tweeter • Sealed back-bracing, anti-resonance chamber design • 1.1oz. Neodymium magnet

1-1/4" Premier Series Component Tweeters • 200W Max • 60W RMS • Polyester soft dome tweeter • Sealed back-bracing, anti-resonance chamber design • 1.1oz. Neodymium magnet

Pioneer TS-T15 Open Box

3/4" Soft Dome Tweeters

Go to item page Right Arrow Icon of Right Arrow

3/4" Soft Dome Tweeters

3/4" Tweeters • 120W Max • 40W RMS • Styrene rubber polyester soft dome tweeter • Flush and surface mounting capabilities • -6dB/oct. Capacitor Included for Tweeter Protection • Poly-Imide Voice Coil Bobbin

3/4" Tweeters • 120W Max • 40W RMS • Styrene rubber polyester soft dome tweeter • Flush and surface mounting capabilities • -6dB/oct. Capacitor Included for Tweeter Protection • Poly-Imide Voice Coil Bobbin

    clear all

    Pioneer Tweeters Information

    With improved clarity and high temperature voice coils, Pioneer tweeters are a must have for your audio system. With surface and flush mounting options available, these small speakers offer crisp sounds. When you think of tweeters, think of Pioneer.
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    ADVERTISEMENT
    Save up to 10 different vehicles in your garage

    Loading...
    Identify your vehicle and submodel details
    • Owner’s manual
    • Vehicle’s insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver’s side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon