Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in Fits Chrysler 2013-Up
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2011-2023 vehicles from Ford
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2018-2024 vehicles from Toyota
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2006-2023 vehicles from GMC, Chevrolet, Cadillac
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2006-2023 vehicles from GMC, Chevrolet, Cadillac
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Adjustable 2-channel line out converter • Separate level adjustment for each channel • 400 watt maximum output • AccuBASS circuitry restores bass signal
• Adjustable 2-channel line out converter • Separate level adjustment for each channel • 400 watt maximum output • AccuBASS circuitry restores bass signal
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2019-2024 vehicles from GMC, Chevrolet With RPO IOR
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2019-2024 vehicles from GMC, Chevrolet With RPO IOR
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2009-2023 vehicles from Honda, Acura
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2017-2024 vehicles from Hyundai, Kia
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
2-Channel Line Out Converter Digital Bass Enhancer with xBOOST, Impedance Matching, and Remote Level Control
• 2-Channel Speaker Level Inputs
• Adjustable xBOOST corrects for bass roll-off
• Handles up to 30V (225 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection
• Load selection switch (20, 60, or 20K ohms)
• Wired remote bass level control included
• LED Clip indicator
• 2-Channel Speaker Level Inputs
• Adjustable xBOOST corrects for bass roll-off
• Handles up to 30V (225 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection
• Load selection switch (20, 60, or 20K ohms)
• Wired remote bass level control included
• LED Clip indicator
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier for Nissan 2007-Up
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
4-Channel 600W Adjustable Line Output Converter with Remote Turn On
• 4-Channel Premium Adjustable Line Output Converter • 6:1 Step Down With Adjustable Output • 600w Total Maximum Input (150w Per Channel) • Super Low Distortion
• 4-Channel Premium Adjustable Line Output Converter • 6:1 Step Down With Adjustable Output • 600w Total Maximum Input (150w Per Channel) • Super Low Distortion
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in BMW/MINI/VW 2001-2017
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
2-Channel 300W Adjustable Line Output Converter with Remote Turn On
• 2-Channel Premium Adjustable Line Output Converter • 3:1 Step Down With Adjustable Output • 300w Total Maximum Input (150w Per Channel) • Super Low Distortion
• 2-Channel Premium Adjustable Line Output Converter • 3:1 Step Down With Adjustable Output • 300w Total Maximum Input (150w Per Channel) • Super Low Distortion
• Direct Factory Plug and Play Design • Easy Connectivity for MUD Series Amplifiers • Remote Turn-On Provided for Amplifier Activation • No Cutting or Splicing of Factory Wiring Required, Will Not Effect Factory Warranty
• Direct Factory Plug and Play Design • Easy Connectivity for MUD Series Amplifiers • Remote Turn-On Provided for Amplifier Activation • No Cutting or Splicing of Factory Wiring Required, Will Not Effect Factory Warranty
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in Chrysler 2011-2020
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2016-2022 vehicles from Honda
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
6 inputs / 6 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control
• 6-Channel Speaker Level Inputs
• 6-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection
• Load selection switch (20, 60, or 20K ohms)
• Wired remote bass level control included
• LED Clip indicator
• 6-Channel Speaker Level Inputs
• 6-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection
• Load selection switch (20, 60, or 20K ohms)
• Wired remote bass level control included
• LED Clip indicator
An amp line out converter, also known as a line output converter (LOC), is a device used to convert high-level speaker-level signals from a car's factory stereo into a low-level RCA signal. It allows you to connect aftermarket amplifiers or audio processors to the existing factory audio system, which often lacks RCA outputs. Using an amp line out converter is essential to ensure a clean and reliable signal transfer from your car's stereo to the aftermarket components, such as subwoofers or external amplifiers. Without a line out converter, attempting to tap into the speaker wires directly for signal input can lead to signal distortion, noise, and potential damage to your audio equipment.
Installing an amp line out converter requires some basic knowledge of car audio wiring and connections. Start by identifying the speaker wires that you want to tap into for the audio signal. Use a wire stripping tool to expose a small section of the wire's insulation. Next, connect the speaker-level input wires of the line out converter to the corresponding speaker wires, ensuring proper polarity. Once the input connections are secure, connect the RCA output cables from the line out converter to the RCA inputs of your aftermarket amplifier or audio processor. Finally, connect the converter's ground wire to a suitable grounding point, typically the car's chassis. Before finalizing the installation, double-check all connections and ensure there are no loose wires.
Yes, you can use multiple amp line out converters in your car audio system if you require different signal outputs for various audio components. For instance, if you are amplifying multiple speakers and a subwoofer, you may need separate converters to provide the necessary signal inputs to each amplifier. When using multiple line out converters, it is crucial to ensure proper signal level matching and avoid signal clipping or distortion. Additionally, make sure that each converter's ground wire is adequately connected to prevent ground loop noise. If you are unsure about the best setup for your specific audio system, consider consulting with a professional car audio installer or technician to design an optimal configuration.
In most cases, an amp line out converter requires a remote turn-on wire to activate the aftermarket amplifiers or audio processors. The remote turn-on wire is responsible for sending a signal to the amplifiers when the car's stereo is turned on. It ensures that the amplifiers power up and down along with the factory head unit, preventing unnecessary power drain and ensuring proper system operation. Locate the remote turn-on lead from your car's stereo or ignition system, and connect it to the remote turn-on input on the line out converter. This simple connection enables the entire audio system to turn on and off automatically, providing a seamless and convenient listening experience.
Yes, an amp line out converter can significantly improve the sound quality of your factory car audio system, especially when used in conjunction with aftermarket amplifiers and speakers. Factory head units often lack the power and audio processing capabilities of aftermarket audio equipment, resulting in subpar sound performance. By integrating an amp line out converter and adding external amplifiers, you can achieve cleaner and more powerful audio output. This setup allows you to drive high-quality aftermarket speakers or subwoofers efficiently, resulting in improved clarity, bass response, and overall audio fidelity. Additionally, many line out converters come with built-in signal processing features, such as bass restoration or line level adjustment, enabling further customization and fine-tuning of the audio output to suit your preferences.
All About Line Out Converters
Line out converters are meant for transferring a signal from an amp or source unit and converting it into high quality, low-noise pre-amp signal. Choose from our wide variety of converters to add an outstanding aftermarket amplifier and/or processor.
Are you looking for top-quality amp line out converters to enhance your car audio experience? Look no further! At Sonic Electronix, we offer a wide range of high-performance amp line out converters designed to deliver clean and powerful audio signals to your amplifiers. Upgrade your car audio system with our premium converters and enjoy superior sound quality. Explore our selection of amp line out converters to find the perfect match for your audio needs.
Amp Line Out Converters - Enhance Your Car Audio System
Amp line out converters, also known as LOCs, are an essential component for integrating aftermarket amplifiers into your car audio system. They serve as a bridge between your car's factory stereo and your amplifiers, allowing you to connect the two seamlessly. One of the most common scenarios where amp line out converters are needed is when you want to add an aftermarket subwoofer or amplifier to your car's factory audio system.
One of the key advantages of using an amp line out converter is that it enables you to tap into the existing speaker wires of your factory stereo and convert the high-level speaker outputs into a low-level RCA signal that amplifiers can understand. This ensures a clean and distortion-free audio signal, resulting in enhanced sound quality.
Another advantage of using amp line out converters is their versatility. They come in various configurations, including 2-channel, 4-channel, and even multi-channel options, making them compatible with a wide range of car audio setups. Whether you're upgrading your entire audio system or just adding a subwoofer, amp line out converters are a valuable tool to have.
Sonic Electronix - Your Source for High-Performance Amp Line Out Converters
At Sonic Electronix, we take pride in offering only the best amp line out converters from reputable brands known for their exceptional performance and reliability. Our selection includes various options to suit different audio setups and preferences.
Our team of car audio experts is always ready to assist you in finding the perfect amp line out converter for your specific needs. If you have any questions or need guidance in choosing the right converter for your car audio system, don't hesitate to reach out to us at 1-502-200-8010. We are here to ensure you make the best choice and enjoy a seamless audio upgrade.
Popular Brands in Line Out Converters
Shop all brands
Hide all brands
ADVERTISEMENT
We love people and we're ready to help you!
See what separates us from our competition.
Free perks, no PrimeTM fees
Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
Free install gear for stereos
Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
Authentic & Authorized
We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
View best sellers, deals, and more
Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
Learn about All Car Audio
We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
Call or email our experts
Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
Why Shop With Us?
ADVERTISEMENT
YOUR GARAGESave up to 10 different vehicles in your garage