Polk Audio db6501
6.5" 2-Way db Series Component Car Audio Speaker System (Marine Certified)
Quantity: 1
Exceptional Quality and Versatility
Step up your vehicles audio performance with Polk Audio's revolutionary db Series'. Cutting edge technology has allowed for an efficient speaker that has ability to accurately reproduce music like you have never heard before. A precise balance of materials including the Silk/Polymer Dome tweeter and Mica Cone woofer enable smooth roll-off and quick response at any volume. The rubber surround adds to bass response as well as increases the lifetime of the speaker under any conditions. Being marine certified, the Polk db Series will surprise you with its versatility and ability for use in many applications. The high-efficiency loudspeaker means less power is necessary for the same quality output. The revamped db Series delivers that perfect Polk Audio performance and durability like never before.
General Features:
- 6-1/2" 2-way Component System (Marine Certified)
- Power Handling:
- Peak: 600 watts per set / 300 watts each side
- RMS: 200 watts per set / 100 watts each side
- Aerated Polypropylene Cone
- Removable Phase Plug
- Butyl Rubber Surround
- Neodymium Magnet Structure
- Die Cast Aluminum Basket
- U.S. & Euro hole patterns to line up with the mounting screw holes of virtually any vehicle
- 1 1/2” Voice Coil
- Polyimide Voice Coil Former for high thermal stability
- 4-Way Gold Plated Input Terminals Corrosion resistant terminals
- Vent Holes in the basket equalize air pressure on both sides of the spider for more linear travel, flatter frequency response and lower distortion
- 1" Silk/Polymer Tweeter
- Neodymium Motor Structure with Faraday Cap
- High Frequency Waveguide Prevents phase cancellations for smooth, uniform frequency response and wide dispersion
- Zoebel Crossover Network flattens the system impedance curve for more efficient power transfer and flatter response
- Air Core Inductors with Oxygen Free Copper wire, for wider dynamic range, contrast and punch
- Mylar Capacitors
- Tweeter Protection Circuit
- Gold-plated connectors
- Cast-Aluminum heat sink
- 2nd Order Low Pass Filter
- 3rd Order High Pass Filter
- Frequency Response: 40 - 23,000 Hz
- Sensitivity: 92 dB
- 4 ohm Impedance
- 1-year SonicElectronix.com warranty
Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks.
Polk Audio db651
6.5" / 6.75" 2-Way Marine Certified db Series Car Speakers w/ Liquid Cooled Silk Tweeters
Quantity: 1
General Features:
- 6-1/2" / 6-3/4" 2-way Coaxial Speakers (Marine Certified)
- Power Handling:
- Peak: 360 watts per pair / 180 watts each
- RMS: 120 watts per pair / 60 watts each
- Lightweight dynamic balance polymer/mica composite mineral filled cone woofer
- Marine Certified, perfect for use in marine vessels
- 3/4" Liquid-Cooled Silk/Polymer composite Dome Tweeter
- High Pass and Low Pass Crossover Filters
- Low-mass 2-Layer 25mm Kapton Voice Coil former
- Multi-Hole Mounting Pattern
- Shallow mounting depth
- Muscular ABS Grilles (Based on MOMO Designs)
- Durable Butyl Rubber Surround
- Pole Plate Heat Sink
- Flat Spider for faster, longer excursion linear motion
- Flexible Woven Leads sewn directly into Spider for greater reliability
- Polarized Nickel Plated Terminals on PCB terminal board
- Stamped Steel Basket finished in rustproof Gun Metal Gray
- Frequency Response: 40 - 22,000 Hz
- Sensitivity: 92 dB
- 4 ohm Impedance
- 1-Year SonicElectronix.com warranty
Priced Per Pair
Polk Audio DB1212
Single 12" Ported Subwoofer Enclosure Loaded with One 12" db Series Sub
Quantity: 1
Ideal Polk Audio bass can be guaranteed when Polk makes the box for you! The Polk Audio DB1212 is a 12" db Series subwoofer loaded in a vented enclosure and made to the specifications of the subwoofer for optimal sound. Handling a continuous 360 watts of power, the powerful subwoofer is designed for excellent sound quality. For those that are looking for tight, accurate bass, the Polk Audio DB1212 is the perfect choice for you!
Subwoofer Specifications:
- 12" Polk Audio db Series Marine Certified Subwoofer
- Power Handling:
- Peak: 720 watts
- RMS: 360 watts
- Final box impedance: 2 ohm
- Polypropylene cone
- Santoprene surround
- Fire-retardant flat NOMEX Spider
- Double venting of the 4-layer Kapton Voice Coil Former, Cone/Coil Coupler and Pole Piece
- 2" Kapton dual voice coil
- Frequency response: 26-200 Hz
- Sensitivity: 88 dB
- 1-year SonicElectronix.com warranty
- 12" Enclosure Loaded with a Polk db Series Subwoofer
- Made from 3/4" MDF for a solid construction
- Nickel plated input terminals accept up to 8 AWG wire
- Viscoelastic Isolation Damping between the baffle and cabinet prevent vibrations
- Hatchback design
- Covered in durable black carpet and a silver front baffle
- Vented enclosure with a slot port
- Number of ports: 1
- Dimensions: 15-11/16"TD x 18-11/16"BD x 17-1/4"W x 14-3/4"H
Taking the Polk Audio PA D Series Into the Digital Era
The PA D5000.5 is Polk Audio's new high-efficient digital 5-channel amplifier. This amplifier is perfect for providing the correct amount of power to a complete upgrade to your car audio system. With five channels this amplifier will able to amplify four speakers and a subwoofer. So if you are looking to complete upgrade your car audio system and need to supply power to your new drivers this amplifier is the solution for you. With the ability to bridge channels the amplifier will allow for multiple wiring options and power handling ratings, giving you more options with the same about of quality and efficiency.
How does Polk Audio improve on their already popular and very well known PA D series amplifiers? With technology advances Polk Audio has taken their PA D series into the digital amplification. This means a smaller foot print, a super-efficient design which allows for lower power consumption and does away with a larger power supply. This allows the new digital PA D series amplifiers to run far more efficiently with lower distortion and cutting or clipping. The new PA D Digital series amplifiers are available in a monoblock, 2-channel, 4-channel, and 5-channel configuration making them accessible for any application. With a height of under 2 inches for all four configurations these amplifiers also offer a mounting convenience making them practically perfect for any vehicle. All four configurations feature a 4-way protection circuitry and stainless steel hardware that will not corrode, giving the amplifier longevity and a sleek and stylish look. Polk Audio is a known and trusted company and with these new PA D Digital series amplifiers not only are you getting the high Polk Audio quality, you are now getting the quality in a very high and efficient digital range.
Product Features:
- PA D Series 5-Channel Class D Car Amplifier
- RMS Power Rating:
- 4 ohms: 70 watts x 4 chan. + 200 watts x 1 chan.
- 2 ohms: 100 watts x 4 chan. + 400 watts x 1 chan.
- Bridged, 4 ohms: 200 watts x 2 chan.
- Subwoofer Channel (1 ohm): 500 watts x 1 chan.
- CEA-2006 Compliant Amplifier
- Pulse Width Modulated MOSFET power supply
- Wired remote bass level control included
- LED power (blue) and protect (red) indicators
- Soft start turn-on
- 5, 4, and 3 Channel Operation
- Stable at 2 ohms for full range channels and 1 ohm at subwoofer channel
- 4-way protection circuitry (thermal, overload, reverse polarity & speaker short protection)
- Heavy duty aluminum alloy heat-sink
- Nickel-plated RCA level inputs
- Nickel-plated screw terminals
- Subwoofer source selectable: Internal / RCA
- Input sensitivity: 200mV - 6V
- Frequency Response: 20 - 20,000 Hz
- Total Harmonic Distortion (THD): <0.1%
- Signal to Noise Ration: 105 dBA
- Selectable crossover modes: FULL / HPF / LPF
- Variable high-pass filter (front): 40 - 400 Hz, 12 dB/octave
- Variable high-pass filter (rear): 40 - 4,000 Hz, 12 dB/octave
- Variable low-pass filter (front): 80 - 4,000 Hz, 12 dB/octave
- Variable low-pass filter (sub): 40 - 220 Hz, 12 dB/octave
- Variable subsonic filter (sub): 20 - 38 Hz , 12 dB/octave
- Fuse Rating: 40A x 2
- Supply Voltage: 10V - 16V
- 12 AWG Speaker Connections
- 4 gauge OFC power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
- Dimensions: 6-3/4"W x 13-5/16"L x 1-13/16"H
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Check out the Polk Audio PA D5000.5 Owner's Manual
Important Note: Early versions of this amplifier included a "Terminal Adapter". As of 2016, Polk Audio has confirmed that they are no longer sending this adapter with their amplifier, albeit referenced in the user manual. We apologize for any inconvenience, and suggest browsing our selection of "Gauge Adapters" if you wish to use larger than recommended wiring. Thank you!
TruConnex TC4KIT-4B by Metra
4 Gauge Full Spec CCA Amplifier Wiring Kit for Systems up to 650 Watts
Quantity: 1
General Features:
- 4 gauge Power Amplifier Installation Kit
- Designed specifically for car audio systems up to 650 watts
- Premium power and ground wire provides optimal power transfer
- Terminals are Nickel-plated for excellent signal transfer
- ANL Fuse holder offers ideal protection
- True-to-Gauge cables/wires meet or exceed the industry standard of copper required for the gauge size
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Package Includes:
- 17 ft. of 4 AWG Red power cable
- 3 ft. of 4 AWG Gray ground cable
- 17 ft. of Blue remote turn-on wire
- In-line mini ANL fuseholder
- 60 Amp ANL fuse
- Ring Terminals
- Ground Terminals
- Vinyl Cable Ties
- Screws
- Spade Terminals
- Grommets
General Features:
- Audio Interconnect Cable (CCA)
- 2-Channel RCA, perfect for stacking, strapping or connecting amps
- Helical Twist construction minimizes noise and interference
- Patented high tolerance compact machined metal end
- Packed in resealable bag
- Length: 3m (9.8 feet)
- Also available in 16.4 Ft.
- Authorized Internet Dealer
- 1-year Sonic Electronix Warranty