Garage
Shop

RE Audio SE4000DE

4000W Max SE Series Class-D 1-Ohm Stable Monoblock Amplifier

RE Audio
Shop all RE Audio
Product videos
highlight-star-icon

• 1200 Watts RMS x 1 @ 4 ohms
• 1700 Watts RMS x 1 @ 2 ohms
• 2200 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 4000 Watts
• Variable low-pass filter: 40 - 150Hz, 12 dB/octave
• Variable Bass Boost: 0 to +18 dB bass boost
• Wired remote bass level control included
• Dimensions: 8.75"W x 14.7"L x 2.25"H

Learn more about the se4000de

We apologize

This item has been discontinued

Product Highlights


• 1200 Watts RMS x 1 @ 4 ohms
• 1700 Watts RMS x 1 @ 2 ohms
• 2200 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 4000 Watts
• Variable low-pass filter: 40 - 150Hz, 12 dB/octave
• Variable Bass Boost: 0 to +18 dB bass boost
• Wired remote bass level control included
• Dimensions: 8.75"W x 14.7"L x 2.25"H

Description


RE Audio brand icon

Authorized dealer

General Features:

  • RE Audio SE Series SE4000DE
  • Class-D 1-Ohm Stable Monoblock Amplifier
  • RMS Power Rating:
    • 4 ohms: 1200 watts x 1 chan.
    • 2 ohms: 1700 watts x 1 chan.
    • 1 ohm: 2200 watts x 1 chan.
  • Total power output: 4000 watts
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Mono channel operation
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Input sensitivity: 0.25V - 8V
  • Frequency Response: 20 - 150 Hz
  • Total Harmonic Distortion (THD): 0.05%
  • Signal to Noise Ration: 80 dB
  • Variable low-pass filter: 40 - 150Hz, 12 dB/octave
  • Subsonic filter: 20 - 50Hz
  • Variable Bass Boost: 0 to +18 dB bass boost
  • Phase Shift: 0° - 180°
  • Fuse Rating: 30 A x 3
  • 0 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Dimensions: 8.75"W x 14.7"L x 2.25"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty
Check out the SE4000DE Owner's Manual

Specifications & Details


Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
1200 watts x 1 channel
RMS Power @ 2 ohms
1700 watts x 1 channel
RMS Power @ 1 ohm
2200 watts x 1 channel
Power Specifications - Subwoofer Channel
Peak Power @ 4 ohm
2400 watts x 1 channel
Peak Power @ 2 ohms
3400 watts x 1 channel
Peak Power @ 1 ohm
4000 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total Peak Power Output
4000 watts
Total RMS Power Output
2200 watts
THD at Rated RMS Power
0.05%
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Subsonic
Low-Pass Crossover Frequency
40 - 150 Hz
Subsonic Filter
20 - 50 Hz
Signal-to-Noise Ratio
80 dB
Bass Boost
0 - 18 dB
Remote bass/level controller
Yes
Fuse Rating
30A x 3 
Strappable
Yes
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

SE4000DE

Weight:

10.00lbs

Internal SKU:

se4000de

Internal Product ID:

107317

Product and How-to Videos


  • RE Audio New Product Line Overview | CES 2015
  • How To Install an Amplifier: Car Amplifier Basics Part 2

Customer Ratings & Reviews



5 star
50%
4 star
38%
3 star
13%
2 star
0%
1 star
0%



Durability
4.7
Value
4.9
Features
4.5
Design
4.3
Usability
4.5

Customer Reviews

Sort by:

Loading...

Good bang for your buck

Its not a bad amp for $179 its gotten the job done so far.

By Brian on October 4, 2016 Checkmark Icon Verified purchase

1

found this helpful.

Not bad

Running 2nvx 12s wired down to 2ohms It bangs but I'm gonna buy another 1 and strap them together since one just wasn't enough. Unfortunately I'm trying to bang on a budget and this amp pushes them just not to the limit. I don't think it's running at rated but im still getting some decent flex. 2 strapped together and I should get close to 4000w outta them. I was running 2 arc audio ks1200.1 so I'm running 2 separate batter off 2 alternators and I'm usually sitting around 14 volts. The amp doesn't really pull much draw as ive only seen tue beat drop the volta down to 12.5 all in all if your looking for a well built amp with decent power I'd recommend it.

By Michael on October 2, 2016

1

found this helpful.

this amp is dope

my friends said why would you go with this brand etc. don't go for the hype of the other brands i'll tell you why because RE actually has true power and the quality is there. i have this hooked up to 1 12" and my system is louder than my friends car w/ a alpine system of two 12"s

By Errol on August 22, 2016 Checkmark Icon Verified purchase

1

found this helpful.

Big Bang for my buck

I knew RE made good quality woofers but I was unsure about the amp for the price. This is probably one of the best amps that I've owned. I use it on 2 4ohm dvc 15" kicker cvrs. With that gain only a quarter of the way up I'm shaking windows. The only downside is the covers they use to hide the controls. You have to take them completely off to make adjustment if your amp is mounted. Definitely consider this amp if you're looking to bang on a budget!

By Marcus on September 6, 2016 Checkmark Icon Verified purchase

1

found this helpful.

Great for the price.

I haven't clamped this amp yet to see what kind of power it's actually making, but it sounds great on a pair of RE fifteens! You can't beat the price!

By Puresound1 on February 1, 2017 Checkmark Icon Verified purchase

Bass, I Really Love You!

I previously owned the mono block 1500. I purchased this one because the 1500 was clean sounding and extremely powerful with a minimal electrical footprint in my benz. It ran a re audio sxx 10d4 at 2 ohms and flexed my chassis nicely.

I snagged this beast because I was wiring my other benz and wanted to continue the re tradition. This amp is running an sxx 10d2 v2 at 1 ohm for 2200 watts. Just finished the install and at 1/3 power, it is flexing nicely. The power is not draining my cars stock system and I am running zero gauge wiring.

A basshead will know how to tune the amp settings and a novice can figure it out by ear. This amp is responsive and clean sounding!

By whenrysr@icloud.com on December 2, 2016 Checkmark Icon Verified purchase

Nice sound quality.

I don't think it does rated RMS power. I would like to see it dyno'd. Nonetheless, it has plenty of power and the sound quality is extremely crisp and clear.

By FigNewton on November 13, 2016

worth the money

this amp is a very good amp for the money. I am pushing two nvx 10 NVX VCW102 2 ohms subs

By craig on September 27, 2016

Add-ons


Similar Products

Best selling similar products

Alpine MRV-M500

• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier

(38)

$164.95

NVX VAD17001

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

(28)

$214.99

JL Audio JD1000/1

• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier

(2)

$399.99

Related Searches


SE4000DE small

Item added to your cart.

Price: $179.99

Essential add-ons
NVX XLCA2X

2-Channel Line Out Converter

$159.99

$79.99

Add to cart
NVX XLCA2

2 Channel Line Out Converter with xBOOST

$62.49

$49.99

Add to cart
NVX XBBR2

Looking to fine tune the bass in your vehicle? Look no further

$149.99

$69.99

Add to cart
The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

$149.00

$149.00

Add to cart
NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

$18.99

$12.99

Add to cart
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

$14.99

$6.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
T-Spec V8-3DDC

3.0 Farad Capacitor with Digital Read-Out and Built-In Distribution Block

$116.00

$89.00

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable with Dual Twisted Pairs

$9.99

$7.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon