General Features:
- 10" Dual 2-ohm VC-Series Car Subwoofer
- Power Handling:
- RMS: 750 watts
- Recommended Power Range: 600 - 750 Watts RMS
- Impedance: Dual 2 ohms
- Pressed paper cone with woven fiber top
- Custom High Roll foam surround with Nylon stitching
- Die-Cast aluminum basket for maximum rigidity
- Dual Poly-Cotton Spiders
- 2-1/2" Aluminum Voice coil
- 127oz. Triple stacked Ferite magnet motor structure with protective rubber boot
- Frequency response: 20-200 Hz
- Resonance Frequency (Fs): 29 Hz
- Optimal sealed box volume .70 cubic feet
- Optimal ported box volume: 1.50 cubic feet
- Top-mount depth: 6"
- Sensitivity: 83dB
- VCW10GR protective subwoofer grill available (Sold Separately)
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Additional Information:
Why a 10" Subwoofer? Choosing the right subwoofer size can be a difficult decision to make. To help with your decision, you can check out our K-Base Article, that breaks down the difference in the sound generated by the four most common subwoofer sizes. Click Here to read about The Differences In Subwoofer Sizes.
Check out the VC-Series Owner's Manual
Rockford Fosgate Prime R750-1D
750W RMS Class D Monoblock Prime Series Car Audio Amplifier
Quantity: 1
General Features
- Prime Series Full Range Class D Monoblock Car Amplifier
- RMS Power Rating:
- 4 ohms: 250 watts x 1 chan.
- 2 ohms: 500 watts x 1 chan.
- 1 ohm: 750 watts x 1 chan.
- CEA-2006 compliant amplifier
- MOSFET power supply
- Remote bass level input remote included
- LED power (green) and protect (red) indicators
- Variable Bass Boost (0 to +18 dB bass boost at 45 Hz)
- Soft Start Turn-on
- Monoblock channel operation
- Preamp RCA outputs to daisy chain multiple amps
- 2-Way System Protection circuitry
- 60 Amp In-Line fuse is highly recommended
- Heavy duty cast aluminum alloy heatsink for extreme heat dissipation
- Variable high-pass filter (50-500 Hz, 12 dB/octave)Frequency response: 20-250 Hz
- Dimensions: 6-11/16"L x 9-1/8"W x 2"H
- 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Belva BAK42BL (Blue)
Primary Color: Blue - Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Cable (CCA Wiring)
Quantity: 1
General Features:
- Complete 4 Gauge 2-Channel Amplifier Installation Kit
- Designed specifically for car audio systems up to 1000 watts RMS
- Premium Powerflex power and ground wire provides optimal power transfer
- Made from Copper-Clad Aluminum for a pure uninterrupted transfer of power and signal
- Belva CCA wire is made from 30% copper while other CCA wire is just 10% copper
- Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
- In-line Mini-ANL Fuse holder with a 80 amp Mini-ANL fuse offers ideal protection for high powered systems
- Also available as 4-Channel Kit
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Kit includes:
- 17 ft. (5.2 meters) Blue 4 gauge power wire
- 3 ft. (.91 meters) Black 4 gauge ground wire
- 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
- 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
- 20 ft. (6.1 meters) Speaker cable
- One In-line Mini-ANL Fuse Holder with a 80 amp Mini-ANL fuse
- One Black rubber firewall grommet
- One 4 Gauge Blue chrome plated ring terminals
- One 4 Gauge Black chrome plated ring terminal
- Three 18 Gauge Blue Spade terminal
- Two 18 Gauge Black Spade terminal
- One 18 Gauge Red butt connector
- Ten 4" Black zip ties
- 12-Volt Deep Cycle AGM Power Cell
- Sealed absorbed glass mat (AGM) design
- Designed for use as an additional battery to power your high-performance sound system
- Perfect for car audio stereo systems of up to ~600W~750W RMS (~1500W Peak/Max)
- Leak-Proof, non-hazardous design
- Stores energy so you don't need a capacitor for your system
- No external vents allow this battery to be mounted anywhere with no leaks
- Resists extreme vibrations for ultimate performance
- 100% Sealed and maintenance free
- M6 Terminal hardware included
- XS Power 580 terminal post adapters available
- Authorized Internet Dealer
- 2-year Manufacturer's warranty
- Cranking Amps: 600
- Maximum Output: 600 Amps
- Amp Hours: 20
- Weight: 14.5 lbs
- Dimensions: 3-1/16"L x 7-1/8"W x 6-3/4"H
XS Power AK1000
XP FLEX CCA Secondary Battery Installation Kit for 1000-1500 Watt Audio Sytems
Quantity: 1
- (1) 18 ft. 4 Gauge XP FLEX BL Cable
- (1) 3 ft. 4 Gauge XP FLEX Ground Cable
- (6) XS Power Brand Heat Shrink
- (6) 4 Gauge Crimp Terminals
- (2) Battery Clamps
- (2) Grommets
- (2) Fuse Holder, ANL, Set Screws
- (2) Fuse, ANL, 150A
- (10) Wire Clamps
- (10) Zip Ties
- (10) Screws
General Features:
- Secondary Battery Installation Kit
- Designed for 1000-1500 watt audio systems
- 4 gauge Pre Ring terminated power and ground wire with protective heat shrink wrap
- Thick but flexible Copper Clad Aluminum wiring
- XP FLEX Frosted Black ground wire
- XP FLEX Frosted Blue ground wire
- Fuse Holder Dimensions: 4-3/4"W x 1-1/2"D x 1-1/2"H
- Also found as: xsp-ak1000, AK 1000
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Recommended Accessories:
- A Battery Isolator is STRONGLY recommended when installing a second battery:
- Prevents secondary battery from draining the starting battery
- Big 3 Upgrade Kits:
- To get the most out of your new power system check out our Big Three Upgrade Kits
Check out the XS Power AK1000 Installation Procedure