Garage
Shop

Hifonics Brutus BRX2400.1D [Open Box, Like New, Complete]

2400 Watt RMS Brutus Series NextGen Class D Monoblock 1-Ohm Stable Subwoofer Amplifier - (Brutus 2400 Watt)

Hifonics
Shop all Hifonics
EXCLUSIVE
highlight-star-icon

• RMS: 850W x 1 @ 4 ohms, 1600W x 1 @ 2 ohms, 2400W x 1 @ 1 ohm
• Total RMS Power: 2400W
• CEA-2006 Compliant
• Bass Boost: 0-10 dB at 45 Hz
• Aluminum Alloy Heatsink with Illuminated Hifonics Logo
• Dimensions: 18-11/16"L x 10-5/16"W x 2-1/2"H

Learn more about the ls-brx24001d-obc262685-1

We apologize

This item has been discontinued

Description


Hifonics brand icon

Authorized dealer



Brutus BRX Amps: Brutal to Competition

Hifonics Brutus Crossovers

Accu-Cross Crossovers for Sound Shaping

The Gods have struck again from Mt. Olympus. The famous Brutus amplifier has gone through a redesign and now features a new look along with amazing sound. The design for the new Brutus BRX amplifiers has a blue illuminated underglow that gives the amplifier a floating appearance when properly mounted.

The molded and angled illuminated terminals add to the stylish design and also provide stress-free installation access. Accu-Cross crossovers allow for adjustments and sound shaping. The Ultra-Fi MOSFET power supplies ensure the amplifier can maximize its sound capabilities. The new Brutus BRX amplifiers take it to the next level, and are certainly a brutal amplifier.



Hifonics Brutus Terminals

Molded and Angled Illuminated Terminals

All single-channel monoblock amplifiers from the Brutus BRX amplifiers feature NGSD Next Generation Super-D Class. This NGSD digital chip design in the amplifiers has been tweaked to provide an extremely efficient, low temperature, high amplification system.

Brutus Monoblock amplifiers are powerful, and extremely popular choices when it comes to choosing a high power output power source for your car audio installation. They're capable of 1 ohm power output, while following CEA Compliance to ensure that the RMS ratings are true. This alongside their stylish designs and efficient heatsinks make them a true competitor in the car audio industry.



Sonic Electronix Power Certified Amplifier

Hifonics' BRX2400.1D monoblock amplifier is a Sonic Electronix Certified Amplifier. This amp's power output has been professionally tested with our SMD Amplifier Dyno, bringing you it's true power ratings. Learn more about this amp's Sonic Electronix Certified Power Here!

Impedance
Claimed Output
Certified Results
Dynamic Results
4 Ω
850W @ 14.4v
1042W @ 14.62v
1156W @ 14.74v
2 Ω
1600W @ 14.4v
1474W @ 14.30v
1990W @ 14.54v
1 Ω
2400W @ 14.4v
2008W @ 14.05v
3046W @ 14.26v



General Features:

  • Brutus Series Monoblock Class NextGen Super-D Car Amplifier
  • RMS Power Rating (@ 14.4V):
    • 4 ohms: 850 watts x 1 chan.
    • 2 ohms: 1600 watts x 1 chan.
    • 1 ohm: 2400 watts x 1 chan.
  • Sonic Electronix Certified Power Rating*:
    • 4 ohms: 1042 watts x 1 chan.
    • 2 ohms: 1474 watts x 1 chan.
    • 1 ohms: 2008 watts x 1 chan.
  • Ultra-Fi MOSFETS Circuit maximizing power efficiency while improving sound quality
  • Heavy duty aluminum alloy heat-sink with illuminated Hifonics logo
  • Lighted connectors and blue wash of light from the underside of the heatsink
  • LED power (green) and protect (red) indicators
  • Wired remote bass level control included
  • Built-in system diagnostics
  • 1-Ohm Stable operation
  • 10 AWG speaker output connections
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Full-range Preamp RCA outputs to daisy chain multiple amps
    Full-range only if a full range signal is connected to input
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Master/Slave Mode with Output/Input Switch and Dedicated RCA connections
  • Input sensitivity: 200mV - 9V
  • Variable low-pass filter: 35 - 250 Hz
  • Variable sub-sonic filter: 15 - 35 Hz
  • Variable Bass Boost (Bass EQ): 0 - +10 dB at 45Hz
  • Frequency response: 10 - 250 Hz
  • Damping factor: >200
  • Signal-to-noise Ratio: >95dB
  • Total harmonic distortion: 0.10%
  • Recommended Fuse Rating: 250A x 1 (Not Included)
  • CEA-2006 compliant amplifier
    Confirmed by Manufacturer
  • Dimensions: 18-11/16"L x 10-5/16"W x 2-1/2"H
  • 1/0-gauge OFC power and ground wiring is highly recommended for installation, if running amplifier at 2ohms or 1ohm. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty
Recommended Accessories:
  • Auxiliary Battery:
    • An Auxiliary Battery is designed for the enthusiast that needs a proper power reserve, that cannot be had with a capacitor. You don't need a HUGE battery! We are well aware that the Hifonics BRX2400.1D is capable of up to 3000 watts of Dynamic Power, but unless you are competing Every day of your amplifier's life then you likely are only using ~half that power at any given time.
  • Big 3 Upgrade Kits:
    • To get the most out of your new power system check out our Big Three Upgrade Kits. Performing the "Big 3" upgrade to your vehicle will improve the performance of your electrical system and increase its current handling capabilities. This decrease in resistance will reduce light dimming, reduce voltage drops, stabilize voltage and current flow, and decrease the strain being put on your vehicle's electrical charging system.
Check out the Hifonics BRX2400.1D Owner's Manual

*The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.

Product history:

Hifonics BRX2400.1D thumbnail
(newest, current model)
Hifonics BRZ2400.1D thumbnail
(previous model, replaced by Hifonics Brutus BRX2400.1D [Open Box, Like New, Complete])
Hifonics BXi2610D thumbnail
(previous model, replaced by Hifonics Brutus BRZ2400.1D)
Hifonics BXi2608D thumbnail
(previous model, replaced by Hifonics BXi 2610D)
Hifonics BXi2607D thumbnail
(previous model, replaced by Hifonics BXi 2608D)

Item Details


Manufacturer:

Model Number:

BRX2400.1D

Weight:

18.00lbs

Internal SKU:

ls-brx24001d-obc262685-1

Internal Product ID:

118929

Customer Ratings & Reviews



5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%



Durability
0
Value
0
Features
0
Design
0
Usability
0

Customer Reviews

Sort by:

Loading...
Sorry, no reviews found

Add-ons


Similar Products

Best selling similar products

Alpine MRV-M500

• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier

(38)

$164.95

NVX VAD17001

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

(28)

$214.99

JL Audio JD1000/1

• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier

(2)

$399.99

Kicker CXA1800.1 (46CXA18001T)

• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier

(10)

$399.96

Crunch GP-3500.1D

• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier

(6)

$99.99

Related Searches


BRX2400.1D small

Item added to your cart.

Price: $239.99

Essential add-ons
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon