Access exclusive offers, news and more.
Thanks for signing up.You'll be the first to receive updates about new collections, top brands, and exclusive products.
Grand Touring Series Class AB Monoblock Car Amplifier • 425W x 1 chan. @ 4 ohms • 700W x 1 chan. @ 2 ohms • 700W x 1 chan. Max (4 ohms0 • JBL patented DBOC (Dynamic Bass Optimization Circuitry)
Learn more about the gto7001Grand Touring Series Class AB Monoblock Car Amplifier • 425W x 1 chan. @ 4 ohms • 700W x 1 chan. @ 2 ohms • 700W x 1 chan. Max (4 ohms0 • JBL patented DBOC (Dynamic Bass Optimization Circuitry)
Internal Product ID:
12248
5 star |
|
40% |
4 star |
|
20% |
3 star |
|
20% |
2 star |
|
0% |
1 star |
|
20% |
Durability |
|
3.8 |
Value |
|
3.8 |
Features |
|
4 |
Design |
|
4.4 |
Usability |
|
4 |
No complaints here
it works great. i have it runin 2 kenwood kfc-w3013s and hasnt failed me yet. it never over heats and never misses a beat. hits lows amazingly. i would say get it a tru 4 gauge amp kit and a 2 to 3 farad cap.
12
found this helpful.Love it
Consumes low power and hits really hard!
Also has a nice soft lighting
9
found this helpful.not to recommend
I buy this amp after a few mins. No sound & is in protect.. only light of the amp working..
i will NOT recommend this amp!!!
8
found this helpful.Ok, struggles a bit.
It's okay for what it is. Being big on sound, it did not perform to my expectations. Lacking quite a bit maybe ok for that heavy metal stuff where you have a 10 piece band and everyone plays guitar. LOL
7
found this helpful.Very Pleased
It looks great, fits nice and best of all drives my JBL P1224 just right. When it kicks in, jaws drop! The 7001 let's me run plenty of clean power to my single sub. This amp stays cool even in this hot weather.
9
found this helpful.Controls bass level and frequency and monitor voltage
$29.99
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
$7.99
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
$149.00
16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors
$18.99
Great for isolating a second batter making it dedicated to the stereo system
$14.99
Does not create a voltage drop to the second battery like conventional isolators
$65.99
Make installation a breeze with the XBTU
$16.99
No-fail termination and current flow, it helps keep your system protected and running smoothly
$13.99
Great for amplifiers that do not accept a large gauge power wire
$9.99
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
$1.99
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
$2.99
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
$9.99
Best selling similar products
• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier
(38)
$164.95
• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H
(28)
$214.99
• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier
(2)
$399.99
Kicker CXA1800.1 (46CXA18001T)
• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier
(10)
$399.96
• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier
(6)
$99.99
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire
4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire
4 Gauge Power Amplifier Installation Kit
4 Gauge Power Amplifier Installation Kit
Controls bass level and frequency and monitor voltage
Universal Remote Level Bass Control
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
2-Channel Line Out Converter
2 Channel Line Out Converter with xBOOST
Looking to fine tune the bass in your vehicle? Look no further
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
680 Amp SPP Series Dry Cell Battery with Protective Steel Case
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block
1.0 Farad Capacitor with Digital Red Display for up to 1000W Max
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Accepts 4 gauge or 8-gauge wire
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
Belva BAGUH2 AGU Fuse Holder
4/8 Gauge AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
5 Pack of Black 4 Gauge Ring Terminals
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing