Garage
Shop

Rockford Fosgate Punch P3D2-12 (Open Box Complete)

1200W Max (600W RMS) 12" Punch P3 Series Dual 2-Ohm Car Subwoofer (Newest Model)

Rockford Fosgate
Shop all Rockford Fosgate
highlight-star-icon

• 1200W Peak
• 600W RMS
• Anodized Aluminum Heat Sinking Cone
• Santoprene Vertical Attach Surround Technique
• 4-Layer 2-1/2" Voice Coil
• Proprietary Spider Venting

Learn more about the ls-11p3d212-obc286963

We apologize

This item has been discontinued

Description


Rockford Fosgate brand icon

Authorized dealer




Taking Punch to a Higher Stage

Sonic Electronix is now carrying the brand new line of Rockford Fosgate Punch P3 Series Car Audio Subwoofers. The P3D2-12 Punch Series 12" Subwoofer has a peak power rating of 1200 watts and a RMS rating of 600 watts. This sub will produce some earth shaking bass and is constructed with an anodized aluminum cone and a vertical attach surround technique. This woofer is also equipped with a 2.5" Voice coil and a protective PVC textured magnet cover. Add some bumps in your trunk and enhance your cars stereo system with this Rockford Fosgate Punch Series Subwoofer.

While built on a long standing history of performance, the punch series woofers can deliver not only the output to satisfy you when you want it loud but maintain a level of sound quality for when you really want to "listen" to your music. Taking many design cues from the Power Series, Rockford Fosgate engineers continue to improve the Punch Series year after year making it one of the most sought after woofer lines for music and bass enthusiasts alike. With features like Dual tear & fatigue resistant poly-cotton spider for high strength and anodized aluminum voice coil formers to handle heat buildup in the motor structure under full power situations, these drivers are designed to perform.





Anodized Aluminum Voice Coil Former

Anodized Aluminum Voice Coil Former

By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.

 
CEA-2031 Rockford Fosgate Subwoofers

Conforms to CEA-2031

Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.

 
Rockford Fosgate Stitched Tinsel Leads

Stitched Tinsel Leads

To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.

 
Rockford Fosgate VAST Surround

VAST: Vertical Attach Surround Technique

In order to increase the surface area of the cone without causing any installation issues, Rockford Fosgate designed the Vertical Attach Surround Technique (VAST). By redesigning the manner in which the surround adheres to the basket, these speakers gain up to 25% more effective radiating cone area. This improves the nominal efficiency and maximum output.



 

Key Benefits

  • Item Condition: Like New, Open Box, Complete
    Not Refurbished
  • 12" Dual 2 ohm Punch Stage 3 Subwoofer
  • Power Handling:
    • Peak: 1200 watts
    • RMS: 600 watts
  • Recommended power range: 300 - 700 watts RMS
  • CEA-2031 Compliant
  • Klippel Verified
  • Flex-fit™ Mounting pattern
  • Proprietary spider venting/cooling technique
  • StampCast basket with integrated spider venting
  • Sturdy 16 gauge compound bend frame geometry
  • High modulus Kevlar™ re-inforced paper-pulp cone
  • Semi-flexible, PVC removable protective motor cover
  • Multi-point high-temp/high-strength neck joint bonding technique
  • Tall-profile VAST™ Santoprene™ surround for larger surface area
  • Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
  • Fatigue resistant and reduced strain "stitched on" flexible lead wire design
  • Proprietary all metal, radially oriented compression input terminal assembly
  • Optimized motor magnetics with extended pole and bumped vented backplate
  • High temp 2.5" voice coil w/ spun-laced Nomex™ insulating re-inforcement collar
  • Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill
  • Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-12

  •  
  • Mounting Depth: 6.66"
  • Cutout Diameter: 11.25"
  • Magnet Weight: 96 oz
  • Frequency Response: 26.5 - 250 Hz
  • Xmax: 15.2mm
  • Sensitivity: 85 dB @ 1 watt / 1 meter
  • Recommended Ported Enclosure: 1.79ft³
  • Recommended Sealed Enclosure: 1.02ft³
  • Matching Amplifiers: (one subwoofer)
  • Matching Amplifier: (two subwoofers)
  • Authorized Internet Dealer
  • 1-year Sonic Electronix Warranty

  • Priced Individually

Check out the Rockford Fosgate P3 Series Owner's Manual

Tips for Installing the P3D2-12 Subwoofer


Subwoofer Wiring Guide


Wiring Guide to Wire 1 Rockford Fosgate Punch P3D2-12 (Open Box Complete) Subwoofer

Mono Amp

Mono Amp - Option 1

2 Channel Amp - Bridged

Wiring Guide to Wire 2 Rockford Fosgate Punch P3D2-12 (Open Box Complete) Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp - Bridged

Wiring Guide to Wire 3 Rockford Fosgate Punch P3D2-12 (Open Box Complete) Subwoofers

Mono Amp

Mono Amp - Option 1

4 Channel Amp

Wiring Guide to Wire 4 Rockford Fosgate Punch P3D2-12 (Open Box Complete) Subwoofers

2 Channel Amp

4 Channel Amp

Specifications & Details


Subwoofer Specifications
Series
Punch P3 Series
Subwoofer Size
12"
Peak Power Handling
1200 watts
RMS Power Handling
600 watts
Voice Coil(s)
Dual
Impedance (Per Voice Coil)
2 ohms
Voice Coil Diameter
2.5"
Frequency Response
27.7 - 250 Hz
Sensitivity
85 dB
Xmax (millimeters)
16.2 mm
Subwoofer Design
Round / Circle
Main Cone Color
Black
Woofer Composition
Anodized Aluminum
Woofer Surround
Santoprene Rubber
Magnet Structure
Double Stacked
Subwoofer Grille
Optional (Accessory required and sold separately)
Re-Cone Kit Available
No
Recommended Enclosure Specifications
Recommended Enclosure Type
Ported / Vented
Sealed
Minimum Sealed Box Volume
0.75 cubic feet
Maximum Sealed Box Volume
1.25 cubic feet
Minimum Ported Box Volume
1.79 cubic feet
Maximum Ported Box Volume
1.79 cubic feet
Top-Mount Depth (Mounting Depth)
6-11/16"
Cutout Diameter
11-1/4"
Shallow Mount Installation
No
Electromechanical Parameters
Free-Air Resonance (Fs)
26.5 Hz
Equivalent Compliance (Vas)
57.7 liters
Total Speaker Q Value (Qts)
0.49
Electrical Q Value (Qes)
0.53
Electrical Resistance of Voice Coil (Re)
3.20 ohms
Mechanical Q Value (Qms)
6.70
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Item Details


Manufacturer:

Model Number:

P3D2-12

Weight:

21.50lbs

Internal SKU:

ls-11p3d212-obc286963

Internal Product ID:

124371

Customer Ratings & Reviews



5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%



Durability
0
Value
0
Features
0
Design
0
Usability
0

Customer Reviews

Sort by:

Loading...
Sorry, no reviews found

Add-ons


Similar Products

Best selling similar products

Kicker CWR122 (48CWR122)

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 2 ohms
• Polypropylene Cone
• Santoprene Rubber Surround
• Mount depth: 5-3/4"
• Sensitivity: 86.9 dB

(6)

$127.96

Kicker Solo-Baric L7S122 (44L7S122)

• Peak Power: 1500 watts
• RMS Power: 750 watts
• Impedance: Dual 2 ohms
• Injection Molded Polypropylene - IMPP Cone
• Ribbed Santoprene Surround
• Mount depth: 6-11/16"
• Sensitivity: 88.6 dB

(3)

$262.96

NVX VCW124 Version 3 (VCW124v3)

• RMS Power: 1200 Watts
• 3” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket

(120)

$189.99

JL Audio 12W0v3-4

• RMS Power: 300 watts
• Impedance: Single 4 ohms
• Polypropylene Cone
• Foam Surround
• Mount depth: 5.40"
• Sensitivity: 85.64 dB

(40)

$159.99

Kicker Solo-Baric L7S124 (44L7S124)

• Peak Power: 1500 watts
• RMS Power: 750 watts
• Injection Molded Polypropylene - IMPP Cone
• Santoprene Rubber Surround
• Impedance: Dual 4 ohms
• Mount depth: 6-11/16"
• Sensitivity: 86.9 dB

(5)

$262.96

Related Searches


P3D2-12 small

Item added to your cart.

Price: $76.12

Essential add-ons
Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

$6.99

Add to cart
NVX SDTK20

20 Square Feet of Sound Damping Material

$89.99

$59.99

Add to cart
Stinger RKXTK

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

$209.00

$92.99

Add to cart
Dynamat Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$236.95

$149.95

Add to cart
NVX SDRLR1 Sound Damping Rubber Roller

Universal Professional Heavy Duty Roller for Sound Damping

$9.99

$7.99

Add to cart
NVX SDRLR2 Sound Damping Rubber Roller

Universal Professional Heavy Duty Roller for Sound Damping

$11.24

$8.99

Add to cart
Belva BAMMD1

Six Function Digital Multimeter

$14.99

$6.99

Add to cart
Belva BAMMD3

Nine Function Digital Multimeter

$29.99

$9.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon