Access exclusive offers, news and more.
Thanks for signing up.You'll be the first to receive updates about new collections, top brands, and exclusive products.
200W Max, Sedona Series 2-Channel Amplifier
• 70W x 2-Chan. @ 4 Ohm
• 100W x 2-Chan. @ 2 Ohm
• MOSFET Power Supply
• Variable Bass Boost
• Brushed Aluminum Finish
• Platinum 4 AWG Power Block
• Tri Mode Capable
• 70W x 2-Chan. @ 4 Ohm
• 100W x 2-Chan. @ 2 Ohm
• MOSFET Power Supply
• Variable Bass Boost
• Brushed Aluminum Finish
• Platinum 4 AWG Power Block
• Tri Mode Capable
Internal Product ID:
23656
5 star |
|
33% |
4 star |
|
33% |
3 star |
|
0% |
2 star |
|
33% |
1 star |
|
0% |
Durability |
|
4.4 |
Value |
|
3.7 |
Features |
|
4.7 |
Design |
|
4 |
Usability |
|
3.7 |
If you like HOT amps, get this.
I got this to power 2 comp8''s. So 100W RMS per channel.... right? Ha! Something is not right with this amp. I have to turn up the volume and turn up the gain and put on the bass boost to get the subs somewhat loud. BUT I cannot have it turned up that loud for too long... or else.... these will start to cook. Even at low volumes, when the gain is half way, this amp gets HOTTTT!!!! At high volumes, watch out! I burned myself when I touched it to pick it up after it had melted the sticky part of the velcro right off!!! I didn't want to get PPI, but some people said they had good stuff. They do, but only the more expensive stuff. DON't GET LOW END PPI, you'll regret it, like I did!
11
found this helpful.Good amp
Looks and works well. The only bad thing is there are no directions on how to set and adjust filters and passes. Went online and figured it out though.
10
found this helpful.Awesome AMP
Put this amp in an 05' Jeep Wrangler and sound is great. Easy to hide under steering wheel and tap into factory deck. Everyone ask what and how this was done. Sonic has great customer support if needed.
10
found this helpful.Complete 4 Gauge Amplifier Wiring Kit with 2 Channel RCA Interconnects & ANL Fuse Holder
$32.99
Controls bass level and frequency and monitor voltage
$29.99
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
$7.99
16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction
$12.99
Great for isolating a second batter making it dedicated to the stereo system
$14.99
Does not create a voltage drop to the second battery like conventional isolators
$65.99
Make installation a breeze with the XBTU
$16.99
No-fail termination and current flow, it helps keep your system protected and running smoothly
$13.99
Great for amplifiers that do not accept a large gauge power wire
$9.99
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
$1.99
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
$2.99
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
$9.99
Best selling similar products
• 75 watts x 2 channel @ 4 ohms
• 100 watts x 2 channel @ 2 ohms
• Bridged: 200 watts x 1 channel @ 4 ohms
• Total RMS Power: 200 watts
• Class D 2 ohms Stable 2-Channel Amplifier
(6)
$199.99
• 65 Watts RMS x 2 @ 4 ohms
• 100 Watts RMS x 2 @ 2 ohms
• CEA-2006 Compliant
• Refined Heatsink with High Convection Capability
• Automatic Remote Turn-On/Off function
• Dimensions: 8.46" x 7.48" x 1.97"
$199.99
• 250 watts x 2 channel @ 4 ohms
• 400 watts x 2 channel @ 2 ohms
• Bridged: 800 watts x 1 channel @ 4 ohms
• Total RMS Power: 800 watts
• Class D 2 ohms Stable 2-Channel-Channel Amplifier
$224.00
• 50 watts x 4 channel @ 4 ohms
• 65 watts x 4 channel @ 2 ohms
• Bridged: 130 watts x 2 channel @ 4 ohms
• Total RMS Power: 300 watts
• Class D 2 ohms Stable 4-Channel Amplifier
$279.99
• 50 watts x 2 channel @ 4 ohms
• 100 watts x 2 channel @ 2 ohms
• Bridged: 200 watts x 1 channel @ 4 ohms
• Total RMS Power: 200 watts
• Class D 2 ohms Stable 2-Channel Amplifier
$219.99
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder
Complete 4 Gauge Amplifier Wiring Kit with 2 Channel RCA Interconnects & ANL Fuse Holder
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire
4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire
4 Gauge Power Amplifier Installation Kit
4 Gauge Power Amplifier Installation Kit
Controls bass level and frequency and monitor voltage
Universal Remote Level Bass Control
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
L.O.C. PRO Series 2-Channel Line Output Converter with Remote Turn On
Add a 2-Channel amp without replacing your factory radio
80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver
Looking to fine tune the bass in your vehicle? Look no further
16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction
25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire
16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Accepts 4 gauge or 8-gauge wire
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
Belva BAGUH2 AGU Fuse Holder
4/8 Gauge AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
5 Pack of Black 4 Gauge Ring Terminals
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing