Garage
Shop

600W Alpine + RE Audio Bass Bundle

Alpine SWR-1023D 10" Type-R Series Sub + RE Audio XTX1500.1 Amplifier + 4 Gauge Installation Kit

Alpine
Shop all Alpine
EXCLUSIVE
Product videos
highlight-star-icon

10" Dual 2 ohm Type R Subwoofer • 1800W MAX • 300-600W RMS • XTX Series Monoblock Full Range Digital Car Amplifier • CEA-2006 Compliant • Wired Remote Bass Level Control Included • Complete 4 Gauge Amp Kit

Learn more about the xtx15001_swr1023d

We apologize

This item has been discontinued

Product Highlights


10" Dual 2 ohm Type R Subwoofer • 1800W MAX • 300-600W RMS • XTX Series Monoblock Full Range Digital Car Amplifier • CEA-2006 Compliant • Wired Remote Bass Level Control Included • Complete 4 Gauge Amp Kit

Description


Alpine brand icon

Authorized dealer

Alpine and RE Audio Bass Bundle

This Sonic Electronix Exclusive Bass package showcases a RE Audio XTX1500.1 Amplifier along with a 10" Type-R Series, Alpine Subwoofer. This excellent bass package pushes 300-600 watts of clean, continuous RMS power. The Alpine Subwoofer has Dual 2 Ohm Voice Coils; meant to be wired in parallel, to a final impedance of 1 Ohm. For more information regarding subwoofer wiring, please check out our Subwoofer Wiring Diagram.

This Alpine SWR-1023D 10" Type-R Series subwoofer requires 300-600 watts of RMS power. The included RE Audio XTX1500.1 amplifier will compliment this required power by supplying a perfect match-up of certified RMS continuous power. This package also includes a 4 gauge amplifier kit which is perfect to supply power to the amplifier. With the Alpine subwoofer, RE Audio amplifier, and The Install Bay amplifier kit, this bass bundle is great for anyone looking to upgrade their vehicle's audio system

Alpine SWR-1023D:
  • 10" Dual 2 ohm Type R Subwoofer
  • Power Handling:
    • Peak: 1800 watts
    • RMS: 300-600 watts
  • Kevlar reinforced pulp cone woofer
  • 2-Piece Structural Parabolic diaphragm design
  • Injection molded Santoprene rubber surround
  • Alpine exclusive High Amplitude Multi-Roll (H.A.M.R) surround for impressive excusrion and clean, accurate bass
  • FEA Optimized progressive NOMEX spider
  • Radial vented VC head sink
  • Concealed mount gasket system
  • Reinforced layer spider integration tinsel leads
  • Oversized 2-1/2" Voice coil
  • 4-Layer dual voice coil design
  • Voice coil made from 180°C high temperature wire on spiral cut aluminum former
  • Single-piece cast aluminum frame with Alpine Patent Pending Airflow Management System for efficient cooling
  • Airflow Management system controls the temperature of the voice coil by directing the air across the heatsink
  • One sided push terminals make installation and wiring fast and simple
  • Each terminal accepts up to 8 AWG wire for high power signal transfer
  • Concealed gasket mounting system hides the screw holes and makes for a clean install
  • Integrated grill technology allows for a seamless installation of a grill
  • US Patented Compound Radius Curve (CRC) design with integrated short sleeve configuration
  • CRC Machined motor structure creates a symmetrical magnetic field for less distortion and improves power handling
  • High-power, double-stacked strontium magnet structure
  • Newly redesigned for a 20% depth reduction
  • Frequency response: 26-500 Hz
  • Sensitivity: 83 dB
  • 1-year Sonic Electronix warranty
RE Audio XTX1500.1 Features:
  • XTX Series Monoblock Full Range Digital Car Amplifier
  • RMS Power Rating (14.4V):
    • 4 ohms: 190 watts x 1 chan.
    • 2 ohms: 330 watts x 1 chan.
    • 1 ohm: 500 watts x 1 chan.
  • Dynamic power output: 2000 watts
  • Pulse Width Modulated MOSFET power supply
  • LED power (green) and protect (red) indicators
  • Wired remote included
  • Selectable bass boost (0-12 dB at 45 Hz)
  • Single channel operation
  • 2-Way System Protection circuitry (thermal and short circuit)
  • Heavy duty brushed aluminum alloy convection cooled heatsink for efficient heat dissipation
  • Nickel-plated RCA level inputs
  • Nickel-plated 8-18AWG screw terminals
  • Input sensitivity:
    • Low level: 200mV-6V
  • Variable low-pass filter (30-250 Hz, 24 dB/octave, Butterworth)
  • Subsonic filter (10-60 Hz, 24 dB/octave)
  • Signal to noise ration: >90dB
  • Phase Shift Control: 0 - 180°
  • Frequency response: 10-350 Hz
  • Dimensions: 5-15/16"L x 7-1/2"W x 1-15/16"H
  • 4-gauge power and ground wiring is required for installation.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
The Install Bay AK4 Features:
  • Complete 4 Gauge Amplifier Installation Kit with RCA Interconnect Cables
  • Perfect for 1600 watts amplifier setup
  • Includes everything that you need to install a single amplifier
  • Premium power and ground cable
  • 1-year Manufacturer's warranty
The Install Bay AK4 Includes:
  1. 17 ft. of Blue power cable
  2. 3 ft. of Black ground cable
  3. 17 ft. of Clear/blue RCA cable
  4. 25 ft. of Speaker wire
  5. 17 ft. of Remote turn-on wire
  6. In-line AGU fuse holder
  7. 60 Amp AGU fuse
  8. Installation hardware

Specifications & Details


Amplifier Power Specifications
RMS Power @ 4 ohms
190 watts x 1 channel
RMS Power @ 2 ohms
330 watts x 1 channel
RMS Power @ 1 ohm
500 watts x 1 channel
Peak Power Output
2000 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total Peak Power Output
2000 watts
Total RMS Power Output
500 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
1 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
0.1%
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
30 - 250 Hz
Subsonic Filter
10 - 60 Hz
Signal-to-Noise Ratio
90 dB
Bass Boost
0 - 12 dB
Remote bass/level controller
Yes
Fan Cooled
No
Fuse Rating
25A x 2 
CEA-2031 Compliant
No
Subwoofer Specifications
Number of Subwoofers
1
Subwoofer Size
10"
Voice Coil(s)
Dual
Impedance (Per Voice Coil)
2 ohms
RMS Power Handling
600 watts
Total RMS Power Handling
600 watts
Peak Power Handling
1800 watts
Total Peak Power Handling
1800 watts
Woofer Surround
Santoprene Rubber
Woofer Composition
Kevlar Fiber
Minimum Sealed Box Volume
0.5 cubic feet
Maximum Sealed Box Volume
1.0 cubic feet
Minimum Ported Box Volume
0.8 cubic feet
Maximum Ported Box Volume
1.5 cubic feet
Sensitivity
83 dB
Frequency Response
26 - 500 Hz
Xmax (millimeters)
20 mm
Top-Mount Depth (Mounting Depth)
6"
Cutout Diameter
9-1/16"
Recommended Enclosure Type
Ported / Vented
Sealed
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Item Details


Manufacturer:

Model Number:

XTX1500.1_SWR-1023D

Weight:

31.66lbs

Internal SKU:

xtx15001_swr1023d

Internal Product ID:

37822

Product and How-to Videos


  • Car Subwoofer Size Buying Guide | What Size of Sub Should I Get?
  • How To Install an Amplifier: Car Amplifier Basics Part 2

Customer Ratings & Reviews



5 star
57%
4 star
29%
3 star
10%
2 star
3%
1 star
1%



Durability
4.5
Value
4.7
Features
4.4
Design
4.6
Usability
4.6

Customer Reviews

Sort by:

Loading...

has it all

The following review is for AK4, which is a part of the bundle you are viewing.

Kit has everything you need for a hassle free installation, I was thinking I wasn't going to need it, but was glad I had it after things got going.

By steven on September 10, 2012

100

found this helpful.

Love

The following review is for AK4, which is a part of the bundle you are viewing.

I bought this my my 2007 jetta. It work really good the it was easy to put on. I would buy this again.

By Kiera on February 1, 2013

98

found this helpful.

2nd time with this install bay kit

The following review is for AK4, which is a part of the bundle you are viewing.

its a great kit for the price. I bought it once for a buddys Suby and then for my father in laws econoline van. never had a problem with either. sonic can be slow at shipping. but if on a budget this kit kicks butt for the price....not much online can compare for a 4 gauge and price. never a problem with feed back or crappy rca. might have to get a few better connectors but hey its a given. anyways great kit. also great for a basic systems. I wouldn't run more then 100 amps of power max.

By marklar on September 17, 2013

94

found this helpful.

Great Value!!!

The following review is for AK4, which is a part of the bundle you are viewing.

If your looking for an amp install kit with all of the necessities that doesn't cost and arm and a leg this is it. The kit came with everything needed to get power to my amp the length was perfect for a extended cab pickup. The RCA's lack a little but I just used these single channel RCA's to run my sub amp and I bought some Streetwire 4 ch RCA's for the 4 ch amp and it's turned out great. I've always had good luck with Install Bay products!!! I would recommend to any one in search of a good Amp Install Kit!!!

By Dalton on October 5, 2013

93

found this helpful.

Does what its suppose to do!

The following review is for AK4, which is a part of the bundle you are viewing.

This product is exactly what it is, a kit! I LOVE IT, everything i needed was included and durable! the 4ga wire is true to size! (not just labeled 4ga IT REALLY IS!) if needed, id purchase again!

By Alex on August 14, 2012

93

found this helpful.

New amp kit

The following review is for AK4, which is a part of the bundle you are viewing.

Not much to review, It works fine. The only issue is that the power cable doesn't fit into the fuse holder. The fuse glass and holder plastic actually cracked when trying to close it. I'm sure I'll have to replace them soon. Other then that, it's good enough to power my amp with no issues. Yes, I would recommend it to others, just be careful when connecting the fuse holder and power wire. Don't use force!

By Rey on November 12, 2013

93

found this helpful.

Decent for the money

The following review is for AK4, which is a part of the bundle you are viewing.

I originally bought and 8 gauge cuz that's what my amp called for, it was a joke so I returned it and got this 4. Easy return/ exchange. Sounds like it happens a lot...
I think these kits are measured on the outside including plastic diameter not the inside wire.

Anyways buy the next size down from what you need. Kit came with lots of little parts to make the install ez. Would buy again for a 200-400 watt amp

By Land rover on November 7, 2013

88

found this helpful.

Decent Install Kit

The following review is for AK4, which is a part of the bundle you are viewing.

This kit isn't too bad it does the job. The fuse holder seems a little bit cheap on the plastic material but it works. The power cable held up to my abuse when I ran it through my tight space trims in my vehicle and I had to really pull them hard to get through. The RCA cable is a bit thin but I used it for my subs anyways so no problems there.

By Michael on September 10, 2012

88

found this helpful.

AK4

The following review is for AK4, which is a part of the bundle you are viewing.

Bought the Installbay AK4, pretty decent pricing although its wire is very brittle and falls apart when splicing it so be careful. Also remember your going to need a crimping tool so look for one before getting too excited. Overall good product, no problems encountered

By image on March 3, 2011

87

found this helpful.

Great product!

The following review is for AK4, which is a part of the bundle you are viewing.

Now my 1993 honda accord sounds better than ever! Exellent product 100% recomended!

By Andres L. San Miguel on October 31, 2014

90

found this helpful.

Add-ons


Related Products

This item is frequently compared to these items

Install Bay 4 Gauge Amplifier Power Wiring Kit (AK4)

• 4 Gauge Amplifier Installation Kit with RCA Interconnect Cables
• Perfect for 1600 Watts Amplifier Setup
• 17ft. Blue Power Cable
• 3ft. Black Ground Cable
• 17ft. Blue RCA Cable

(114)

$29.99

Related Searches


XTX1500.1_SWR-1023D small

Item added to your cart.

Price: $240.85

Essential add-ons
Belva BAK42 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

$59.99

$34.99

Add to cart
NVX XKIT42 100% OFC True 4 Gauge Wiring Kit with RCA Cables and Speaker Wire

The reviews speak for themselves, this is awesome wire with everything you need!

$114.99

$99.99

Add to cart
40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

$279.99

$89.99

Add to cart
Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$383.95

$235.99

Add to cart
Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

$219.00

$140.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$9.99

$7.99

Add to cart
Five Piece Installer Panel Removal Tool Kit

Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs

$18.99

$11.99

Add to cart
SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

$207.99

$199.99

Add to cart
Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

$461.99

$451.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon