Garage
Shop

VIBE Audio BA10 Subwoofer Pair Combo

Pair of 10" Dual 2 ohm Black Air Series Car Subwoofers

VIBE
Shop all VIBE
EXCLUSIVE
Product videos
highlight-star-icon

Pair of 10" Black Air Series Subwoofers • Dual 2 ohm • 2600 Watts Max • 900 Watts RMS • Polyglass Cone • Multi-Roll Rubber Surround • Dual Spider Assembly • FEMM Motor and FEA Cone • Screw Input Terminals

Learn more about the ba10-pair

We apologize

This item has been discontinued

Product Highlights


Pair of 10" Black Air Series Subwoofers • Dual 2 ohm • 2600 Watts Max • 900 Watts RMS • Polyglass Cone • Multi-Roll Rubber Surround • Dual Spider Assembly • FEMM Motor and FEA Cone • Screw Input Terminals

Description


VIBE brand icon

Authorized dealer

When One Is Just Not Enough

This combo features two 12" VIBE Audio BA10 Dual 2 ohm Black Air series subwoofers. The subwoofers feature a combined RMS of 900 watts, giving you some real strong bass. The woofers are equipped with a polyglass woofer cone and multi-roll rubber surround. The cone and surround materials will offer increased performance, rigidity, and strong power handling capabilities. The woofers also feature a dual spider design for controlled linear motion, 2" voice coil for extreme heat dissipation, and a removable rubber boot for increased magnet protection.

Here at Sonic we understand that sometimes one subwoofer is just not enough bass. So we are happy to introduce our subwoofer pair combos. With these combos you can purchase two subwoofers to get the bass you are really seeking for. The best part of these combos is that we are able to offer some savings by buying the pair together instead of one at a time. So take a look and find the best pair for you.

VIBE Audio Black Air 10 Features:
  • Pair of 10" Dual 2 ohm Black Air Series Subwoofers
  • Power Handling:
    • Peak: 2600 watts total / 1300 watts each
    • RMS: 900 watts total / 450 watts each
    • Minimum: 225 watts
  • Impedance: Dual 2 ohm
  • Polyglass cone made from a combination of polypropylene and fiberglass
  • Multi-roll rubber surround achieves better linearity throughout the subwoofers excursion range
  • Dual Voice Coils (DVC) offers multiple impedance options
  • Unique cone support is specially designed for rigidity without excessive weight
  • Dual spider assists with the control and stability of the cone, as well as higher power handling
  • FEMM Motor provides low distortion and linear flux saturation
  • FEA Cone is designed using Finite Element Analysis (FEA) to ensure maximum rigidity to weight
  • Alloy torsion basket provides rigidity and support for motor and moving parts
  • Removable rubber boot for greater magnet protection
  • Aluminum alloy gasket is made from high quality machined aluminum
  • Screw input terminals allow for heavier gauge speaker wire to be connected to the voice coil
  • 2" Aluminum 4-layer voice coil
  • Single 50 oz. ferrite magnet
  • Mounting depth: 6"
  • Mounting diameter: 9-1/4"
  • Frequency response: 30-1,700 Hz
  • Sensitivity: 88 dB
  • Also found as: ba-10
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Subwoofer Wiring Guide


Wiring Guide to Wire 1 VIBE Audio BA10 Subwoofer Pair Combo Subwoofer

Mono Amp

Mono Amp - Option 1

2 Channel Amp - Bridged

Wiring Guide to Wire 2 VIBE Audio BA10 Subwoofer Pair Combo Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp - Bridged

Wiring Guide to Wire 3 VIBE Audio BA10 Subwoofer Pair Combo Subwoofers

Mono Amp

Mono Amp - Option 1

4 Channel Amp

Wiring Guide to Wire 4 VIBE Audio BA10 Subwoofer Pair Combo Subwoofers

2 Channel Amp

4 Channel Amp

Specifications & Details


Subwoofer Specifications
Series
Black Air Series
Subwoofer Size
10"
Peak Power Handling
1300 watts
RMS Power Handling
450 watts
Voice Coil(s)
Dual
Impedance (Per Voice Coil)
2 ohms
Frequency Response
30 - 1,700 Hz
Sensitivity
88 dB
Xmax (millimeters)
15 mm
Subwoofer Design
Round / Circle
Main Cone Color
Yellow
Woofer Composition
Polyglass
Woofer Surround
Rubber
Subwoofer Grille
No
Re-Cone Kit Available
No
Recommended Enclosure Specifications
Recommended Enclosure Type
Ported / Vented
Sealed
Minimum Sealed Box Volume
1.0 cubic feet
Maximum Sealed Box Volume
1.5 cubic feet
Minimum Ported Box Volume
1.0 cubic feet
Maximum Ported Box Volume
1.0 cubic feet
Top-Mount Depth (Mounting Depth)
6"
Cutout Diameter
9-1/4"
Shallow Mount Installation
No
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

BA10-PAIR

Weight:

25.00lbs

Internal SKU:

ba10-pair

Internal Product ID:

39258

Product and How-to Videos


Customer Ratings & Reviews



5 star
60%
4 star
30%
3 star
0%
2 star
10%
1 star
0%



Durability
4.5
Value
4
Features
4.3
Design
4.6
Usability
4.8

Customer Reviews

Sort by:

Loading...

VIBE Audio Black Air 10 - an audio masterpeice

The following review is for BA10, which is a part of the bundle you are viewing.

I have been an audiophile for about 15 years now, and I cannot come up with one negative thing to say about VIBE. Build quality is superb, appearance of all their products are simply beautiful, cost is decent, and sound of all their products are just amazing. Vibe is high-end quality for what you pay, and they produce the best looking audio components out there in my opinion. The Black Air 10 is a masterpiece.

By Patrick on August 9, 2011

19

found this helpful.

Great sub.

The following review is for BA10, which is a part of the bundle you are viewing.

I have this sub in a .75 cubic feet sealed box, a little less than recommended, and I plan to polyfill soon. I have a Pioneer premier 2 channel delivering 600 watts rms to it currently, low passed up high at 500hz. It sounds AWESOME! Very tight and precise bass, exactly how I like it. I bet if it were in a ported or bandpass box it would be loud as all hell, but it sounds very good in my sealed set up. It is very sturdy and the terminals are nice as well. It is unfortunate that this product has a bad review that states no reason why it was rated poorly. I definitely recommend it. My test tracks were from Adele, Deltron 3030, Pinback, Ray LaMontagne and Atmosphere. It handles all genres very well.

By Evan on December 28, 2011

12

found this helpful.

VIBE Audio Black Air 10 (BA10)

The following review is for BA10, which is a part of the bundle you are viewing.

I had never tried any system from vibe, But after hearing about the performance from colleague i had to try it. If you are looking for deep bass, in a small compartment this is the sub to get. I would recommend it to installer and for a very reasonable price.

By Bafucafu on February 13, 2012

10

found this helpful.

Great Value

The following review is for BA10, which is a part of the bundle you are viewing.

I just bought one of these on sale and it is hooked to a Hifonic HFi 100.2 amp in a vented enclosure in the back of my wrangler. It really does a great job for a kit under 200$ brand new...

By Xavier on March 30, 2011

9

found this helpful.

good sub

The following review is for BA10, which is a part of the bundle you are viewing.

Nice clean bass it hits the low end bass I wish I had a vented box that will hit alot harder I really recommend these

By powder p on December 8, 2010

9

found this helpful.

BA-10

I only run one of these in a sealed box, but I absolutely love it. It handles the 600 watts rms @4 ohms I push it with, and sounds great. Very tight and precise, in my opinion excellent sq, and if it were to be in a ported or bandpass box, good for spl. It is a very sturdy unit, large metal gasket on the front and the spider's and supports are excellent as well as the terminals. Overall, a great purchase and in this package deal, a great value.

By Evan on January 2, 2012

2

found this helpful.

awesome woofer awesome price

I run 8 of these 10" subs in my 2003 chevy extcab in a wall thats 12 cubic foot net tuned to 34 hertz with 14" of port per cubic foot. Powered by a Lanzar Optidrive 6k. VERY conservative gain settings. Mine see roughly 300 watts each. I have a mechman 270amp alternator on 16volts and 3 xs power d1600s. These little subs hammer anything from 18hertz to 45hertz. They just kill every song i throw at them. Been going strong for 5 months now. HIGHLY reccomend this sub

By E on December 24, 2011

2

found this helpful.

true rms

The following review is for BA10, which is a part of the bundle you are viewing.

i have 4 of these in sealed boxx 1 cubic foot each 425 watts rms it can handle with no problem but sound is not all that i wish i had brought kicker in stead oh yeah good test song rick ross mc hammer but dont crank it until u break woofer in good or u may blow it but it will let u know if u have a good woofer or not so far kicker has been the only woofer to reproduce the bass notes right im sure there may be others that can do it but u will not have to wonder if u choose kicker and for power hifonic u get a lot for little

By fdomino on January 5, 2011

8

found this helpful.

Great sub

I bought these because the specs looked good on paper and because they were cheep. Little did i know these bad boys would have me fall head over heels in love with vibe audio. They bump, and they look good doin it. I have these hooked up to a 400 watt kicker that is turned down severely because if you turn it up just a little the bass overtakes the car. I needa throw some tweeters in. I love em though.

By Philip on January 11, 2012

1

found this helpful.

good sub for the price.

I have 2 of these in a van and they hit hard and sound awesome.

By kelly on November 3, 2011

1

found this helpful.

Add-ons


Similar Products

Best selling similar products

Kicker 47KBRW10 ReFLEX™

• 10" ReFLEX™ Passive Radiator
• Rubber covered plastic Cone
• Rubber Surround

$59.99

NVX VCW104 Version 3 (VCW104v3)

• RMS Power Range: 650-800 watts
• Pressed Paper Cone Carbon Fiber Top
• Dual 4-ohm Voice Coil
• High Excursion Foam Surround
• Dual Progressive Spiders with Integrated Tinsel Leads

(62)

$109.99

JL Audio 10W0v3-4

• RMS Power: 300 watts
• Impedance: Single 4 ohms
• Polypropylene Cone
• Foam Surround
• Mount depth: 4.90"
• Sensitivity: 84.07 dB

(53)

$139.99

NVX VSW104 Version 2 (VSW104v2)

• 10" VS-Series Subwoofer
• Dual 4-ohm Voice Coil
• RMS Range: 500 Watts
• Non-Pressed Paper With Woven Carbon Fiber Top
• High Excursion Foam Surround
• Stamped Steel Basket
• Single Nomex Spider

(27)

$74.99

Kicker CompVR CVR104 (43CVR104)

• Peak Power: 700 watts
• RMS Power: 350 watts
• Impedance: Dual 4 ohms
• Sensitivity: 83.6 dB
• SoloKon Polypropylene Cone
• Santoprene Rubber Surround
• Mount depth: 5-1/2"

(14)

$89.96

Related Searches


BA10-PAIR small

Item added to your cart.

Price: $51.95

Essential add-ons
Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

$6.99

Add to cart
NVX SDTK20

20 Square Feet of Sound Damping Material

$89.99

$59.99

Add to cart
Dynamat Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$236.95

$149.95

Add to cart
NVX SDRLR1 Sound Damping Rubber Roller

Universal Professional Heavy Duty Roller for Sound Damping

$9.99

$7.99

Add to cart
NVX SDRLR2 Sound Damping Rubber Roller

Universal Professional Heavy Duty Roller for Sound Damping

$11.24

$8.99

Add to cart
Belva BAMMD1

Six Function Digital Multimeter

$14.99

$6.99

Add to cart
Belva BAMMD3

Nine Function Digital Multimeter

$29.99

$9.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon