Wire Harness to Connect an Aftermarket Stereo Receiver to Select 2000-Up Kia Vehicles
• In-Dash Car Radio Harness That Plugs Into Factory OEM Radio Plug For Select 2000-Up Kia Vehicles
• No Cutting Wires
When replacing your factory radio with an after-market car stereo, the Scosche KA01B wire harness is a must for a quick and clean installation. It eliminates cutting your OE radio plug. After connecting it, your install is simple as the wires will color-match and easily connect to the after-market stereo. Without the Scosche KA01B, you would have to cut the OE radio plug and manually test each wire to connect to your after-market receiver. In addition, because you do not have to cut your OE radio plug off, the KA01B allows you to reinstall your factory receiver if necessary. A great example is if you sold your car, but wanted to keep your after-market radio and re-install your factory stereo receiver. We also recommend the Scosche BOBAZT for a quick connection that is sure to last.
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
Internal Product ID:
4528
Awesome
This really helped and it was free so it was very cost effective and helped with my stereo installation greatly.
11
found this helpful.Great value
This device made the installation a breeze. Could not have installed the radio without it.
11
found this helpful.As expected
This harness is really good. Comprehensive instructions, even the wires are labelled so that they can easily be connected.
Well, there is a minor error: Blue with White Stripe - Amp Turn-On
It is actually the power antenna.
Also there is a pin/wire missing from this harness (which exists in the car connector), but I could not figure out what it was and does not seem to be needed, either.
10
found this helpful.Fits perfectly
Not much to say but plug and play.
11
found this helpful.Best selling similar products