Garage
Shop

JBL Compact Installation Bass Package

1800W JBL MS Series Compact Installation Car Audio Bass Package

JBL
Shop all JBL
EXCLUSIVE
Product videos
highlight-star-icon

• 1800W Peak
• 450W RMS
• Polypropylene Cone
• Polyurethane/Fabric Surround
• DSP (Digital Signal Processing)
• Sophisticated Crossover Functions and Selectable Crossover Slopes
• CEA-2006 Compliant

Learn more about the ms12sd4_msa5001

We apologize

This item has been discontinued

Product Highlights


• 1800W Peak
• 450W RMS
• Polypropylene Cone
• Polyurethane/Fabric Surround
• DSP (Digital Signal Processing)
• Sophisticated Crossover Functions and Selectable Crossover Slopes
• CEA-2006 Compliant

Description


JBL brand icon

Authorized dealer

JBL MS-12SD4

900W RMS 12" MS Series Dual 4 ohm Subwoofer
Quantity: 1

General Features

  • 12" Dual 4 ohm MS Series Subwoofer
  • Power Handling:
    • Peak: 1800 watts
    • RMS: 900 watts*
  • Impedance: Dual 4 ohm
  • Polypropylene cone material
  • Laminated polyurethane and fabric surround
  • Vented pole piece
  • Designed for both sealed and vented enclosures
  • Aluminum frame with black epoxy coating
  • 2-1/2" Copper voice coil with Kapton former
  • 56 oz. Barium ferrit magnet structure
  • Silver-plated push terminals
  • Frequency response: 30-400 Hz
  • Sensitivity: 87 dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

JBL MS-A5001

Tested at 750W RMS on our Amp Dyno! (Rated 500W RMS by JBL), 1-Channel Monoblock Class D Car Amplifier with Digital Input Mixer and Graphical Status Display
Quantity: 1

General Features

  • MS Series Monoblock Class D Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 500 watts x 1 chan.
    • 2 ohms: 500 watts x 1 chan.
  • Sonic Electronix Certified Power Rating*:
    • 4 ohms: 468 watts x 1 chan.
    • 2 ohms: 692 watts x 1 chan.
  • CEA-2006 compliant amplifier
  • Digital signal processing amplifier
  • Pulse Width Modulated MOSFET power supply
  • Wireless Remote bass level input (JBL MS-WBC remote level control sold separately)
  • Built-in display shows tone and gain settings
  • Soft Start Turn-on
  • Mono channel operation
  • "Hi2" input setting provides factory system amps with output loads, eliminating "speaker disconnected" error messages
  • Speaker-level inputs with signal sensing for automatic turn-on
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
  • Digital input-mixer control eliminates the need for Y adapters
  • Heavy duty aluminum alloy heatsink for extreme heat dissipation
  • CD for system setup included
  • Gold-plated RCA level inputs
  • Gold-plated screw terminals
  • Input sensitivity: 100mV - 20V
  • Signal to Noise Ratio: 80 dB
  • Frequency Response: 20 - 270 Hz
  • Selectable crossover slopes: 6 dB/oct, 12 dB/oct, 24 dB/oct
  • Variable low-pass filter: 97 points from 20 - 140 Hz
  • Variable high-pass filter: 97 points from 20 - 140 Hz
  • Dimensions: 8-13/16"L x 7-1/4"W x 2-13/16"H
  • 4 - 8 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Recommended Configurations:

  • Two JBL GTO1214 12" Subwoofers wired to a 2ohm load for 692W @ 13.42v - 826W @ 13.28v RMS
  • One JBL W12GTi-MkII 12" Subwoofer wired to a 3ohm load for 500W - 725W RMS
  • One JBL GT5-2402BR Dual 12" Subwoofer/Enclosure wired to a 2ohm load for 692W @ 13.42v - 826W @ 13.28v RMS
  • Two Infinity Kappa 120.9W 12" Subwoofers wired to a 2ohm load for 692W @ 13.42v - 826W @ 13.28v RMS

*The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.

Item Details


Manufacturer:

JBL

Model Number:

MS-12SD4_MS-A5001

Weight:

22.00lbs

Internal SKU:

ms12sd4_msa5001

Internal Product ID:

76555

Product and How-to Videos


Customer Ratings & Reviews



5 star
75%
4 star
16%
3 star
9%
2 star
0%
1 star
0%



Durability
4.6
Value
4.8
Features
4.9
Design
4.9
Usability
4.7

Customer Reviews

Sort by:

Loading...

good product

The following review is for MS-A5001, which is a part of the bundle you are viewing.

I have no complaints this product is great i would recommend This to anyone looking for easy Setup .

By frank on January 13, 2015

81

found this helpful.

Great seller

The following review is for MS-A5001, which is a part of the bundle you are viewing.

I advise!! Fast shipping!! I received my amp perfect!!

By JPFURCN on October 13, 2014

78

found this helpful.

Simply Awesome

The following review is for MS-A5001, which is a part of the bundle you are viewing.

When I saw this amp and read up on it I had to have it. It's a lot of bang for the buck. Setup is scary simple. The digital circuitry and class D design is clean and second to none. I have this paired with a JBL P1224 in a ported box and it is much louder than I expected. Very nice.

By Geege on July 13, 2011

79

found this helpful.

JBL MS A5001

The following review is for MS-A5001, which is a part of the bundle you are viewing.

This Amp is beautifully designed, easy to use and set up! I have it running one 10" JL W1 in a small sealed enclosure in my 2014 4runner. Power is clean and plenty of it. I highly recommend it for its design, flexibility, and clean power!

By Tony on September 20, 2014

72

found this helpful.

Serious power, I love the amp for the value

The following review is for MS-A5001, which is a part of the bundle you are viewing.

I paired this with two 10" GTO JBL 528 subs wired in parallel, 4 ohm, and it hits so freaking hard, my jeep bounces! Seriously, this is a great amp for the cost. I also own JL Audio and can't tell the difference.

By Scott on January 14, 2015

73

found this helpful.

great little amp

The following review is for MS-A5001, which is a part of the bundle you are viewing.

The shipping was fast and packaged appropriately. The only minor inssue I ran into during installation was the remote input. The input had a 1.5 hex instead of 2.5, so the supplied Allen wrench wouldn't fit. I would suggest reading the book a couple of times b4 setup. I have it pushing a Fi Audio X10 in a 1.3 ported enclosure tuned at 33hz. It sounds better than when I had the kicker zx750.1 pushing it. I'll have to update this review once I have it for awhile to give opinion on durability.

By Rolando on February 17, 2015

67

found this helpful.

Nice Amplifier!

The following review is for MS-A5001, which is a part of the bundle you are viewing.

I am using this for a pair of Pioneer TS-W260S4 subwoofers and a Kenwood Excelon 998 in a 2003 F-150.

This was a huge improvement over the OEM installation, and I am really enjoying the punch that these deliver!

The installation and setup of the amplifier went well enough without any major issues.

By Mr Sparkie on September 11, 2014

68

found this helpful.

great amp

The following review is for MS-A5001, which is a part of the bundle you are viewing.

This amp is great easy to use and set up nothin bad to say about it

By lil a on April 2, 2015

62

found this helpful.

Awesome features

The following review is for MS-A5001, which is a part of the bundle you are viewing.

Purchased this amp for the features. Upon arrival, it did not work. I hooked up my Kicker and completely forgot about it. Sonic has a great warranty, so I sent it back- even after the warranty had expired. They gave me another even, so I hooked it up and mounted it on the box, as my box has an amp rack. I blew the screen. It still works great but I can't change anything on the amp as I cant see what I am doing without the digital display. Shame on me for that one!

By Jason on December 27, 2014

63

found this helpful.

jbl ms-a5001

The following review is for MS-A5001, which is a part of the bundle you are viewing.

Awesome amp for the money. Pushing 2 rockford fosgate p1. Sounds amazing.

By jensen on May 12, 2014

64

found this helpful.

Add-ons


Similar Products

Best selling similar products

NVX QBUS8P

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

(6)

$129.99

NVX QBSTA

• 11" Spare Tire Subwoofer System
• Built-In Class D Amplifier
• Top-mount amplifier controls
• Speaker-Level Inputs
• Wired Remote Bass Level Control

$249.99

Pioneer TS-WX1210AM

• 350 watts Single 12" Subwoofer Enclosure
• 4 ohms Impedance
• Spring-loaded Terminal Posts
• Enclosure Dimensions: 10" TD x 12-1/2" BD x 19-3/4" W x 14-7/8" H

(2)

$179.99

MTX Audio TNP212D2 Terminator Dual Subwoofer Package + Amplifier

• 800W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting

(153)

$279.95

Belva BPKG210v2 Dual 10" Subwoofer and Amp Package with Box and Wiring Kit

• Works with both Factory and Aftermarket Audio Systems
• Dual 10" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

(28)

$214.99

Related Searches


MS-12SD4_MS-A5001 small

Item added to your cart.

Price: $239.95

Essential add-ons
40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

$279.99

$89.99

Add to cart
Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$383.95

$235.99

Add to cart
Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

$219.00

$140.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$9.99

$7.99

Add to cart
Five Piece Installer Panel Removal Tool Kit

Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs

$18.99

$11.99

Add to cart
SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

$207.99

$199.99

Add to cart
Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

$461.99

$451.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon