Garage
Shop

Power Acoustik + PowerBass Bass Bundle

2 PowerBass M-104D 10" Dual 4 ohm 650W Subwoofers w/ Power Acoustik RZ1-1500D Compact Monoblock Amplifier + Kit

EXCLUSIVE
Product videos
highlight-star-icon

• 2 PowerBass M-104D Dual 4 ohm 10" M-Series Car Subwoofers
• 650W Max, 325W RMS (Each)
• Power Acoustik RZ1-1500D Monoblock RAZOR Amplifier
• RMS: 600W x 1 @ 4 ohms, 900W x 1 @ 2 ohms
• Belva BAK42BK Complete 4 Gauge Amplifier Wiring Kit

Learn more about the 2-m104d_rz11500d_bak42bk

We apologize

This item has been discontinued

Product Highlights


• 2 PowerBass M-104D Dual 4 ohm 10" M-Series Car Subwoofers
• 650W Max, 325W RMS (Each)
• Power Acoustik RZ1-1500D Monoblock RAZOR Amplifier
• RMS: 600W x 1 @ 4 ohms, 900W x 1 @ 2 ohms
• Belva BAK42BK Complete 4 Gauge Amplifier Wiring Kit

Description


Power Acoustik brand icon

Authorized dealer

PowerBass M-104D

10" Dual 4 ohm M-Series Car Subwoofer
Quantity: 2 Subwoofers

General Features:

  • 10" Dual 4 ohm Auto Sound Series Subwoofer
  • Power Handling:
    • Peak: 1300 watts total / 650 watts each
    • RMS: 650 watts total / 325 watts each
  • 4-Layer polypropylene, non-pressed paper cone woofer for distortion free bass
  • Large roll santoprene surround allows for maximum excursion
  • Black emissive coated backplate and pole piece
  • 2" Vented BASV Voice coil former for optimal performance
  • Rigid tooled basket with black powder coat finish for a stable woofer foundation
  • Chrome push terminals
  • Frequency response: 29 - 500 Hz
  • Sensitivity: 91 dB
  • Authorized Internet Dealer
  • 1-year Sonic Electronix warranty

Power Acoustik RZ1-1500D

1500W Max, Monoblock RAZOR Series Full Range Class D Car Amplifier
Quantity: 1 Amplifier

General Features:

  • Monoblock RAZOR Series Full Range Class D Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 600 watts x 1 chan.
    • 2 ohms: 900 watts x 1 chan.
  • Max power output: 1500 watts x 1 chan.
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +12 dB bass boost at 50 Hz)
  • Soft start turn-on
  • Mono channel operation
  • Speaker-level (high-level) inputs
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heat-sink for extreme heat dissipation
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Variable subsonic filter (10-50 Hz, 24 dB/octave)
  • Variable low-pass filter (50-250 Hz, 24 dB/octave)
  • 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
  • Dimensions: 4-3/4"W x 10"L x 1-1/3"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Belva BAK42BK (Black)

Complete 4 Gauge Amplifier Wiring Kit With 2-Channel RCA Cable (CCA Wiring)
Quantity: 1 Wiring Kit

General Features:

  • Complete 4 Gauge 2-Channel Amplifier Installation Kit
  • Designed specifically for car audio systems up to 1000 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Made from Copper-Clad Aluminum for a pure uninterrupted transfer of power and signal
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • In-line Mini-ANL Fuse holder with a 80 amp Mini-ANL fuse offers ideal protection for high powered systems
  • Also available as 4-Channel Kit
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Black 4 gauge power wire
  2. 3 ft. (.91 meters) Silver 4 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
  5. 20 ft. (6.1 meters) Speaker cable
  6. One In-line Mini-ANL Fuse Holder with a 80 amp Mini-ANL fuse
  7. One Black rubber firewall grommet
  8. One 4 Gauge Blue chrome plated ring terminals
  9. One 4 Gauge Black chrome plated ring terminal
  10. Three 18 Gauge Blue Spade terminal
  11. Two 18 Gauge Black Spade terminal
  12. One 18 Gauge Red butt connector
  13. Ten 4" Black zip ties

Specifications & Details


Amplifier Power Specifications
RMS Power @ 4 ohms
600 watts x 1 channel
RMS Power @ 2 ohms
900 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total Peak Power Output
1500 watts
Total RMS Power Output
900 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
2 ohms
THD at Rated RMS Power
.5%
Speaker Level Inputs
Yes
Preamp Outputs
No
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
50 - 250 Hz
Subsonic Filter
10 - 50 Hz
Signal-to-Noise Ratio
70 dB
Bass Boost
0 - 12 dB
Remote bass/level controller
Yes
Fan Cooled
No
Fuse Rating
20A x 2 
CEA-2031 Compliant
No
Subwoofer Specifications
Series
M Series
Subwoofer Size
10"
Voice Coil(s)
Dual
Impedance (Per Voice Coil)
4 ohms
RMS Power Handling
325 watts
Peak Power Handling
650 watts
Woofer Surround
Santoprene Rubber
Woofer Composition
Polypropylene
Sensitivity
91 dB
Frequency Response
29 - 500 Hz
Recommended Enclosure Type
Ported / Vented
Sealed
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

2-M-104D_RZ1-1500D_BAK42BK

Weight:

37.60lbs

Internal SKU:

2-m104d_rz11500d_bak42bk

Internal Product ID:

92901

Product and How-to Videos


Customer Ratings & Reviews



5 star
70%
4 star
21%
3 star
8%
2 star
1%
1 star
0%



Durability
4.5
Value
4.9
Features
4.4
Design
4.7
Usability
4.5

Customer Reviews

Sort by:

Loading...

Quality Product

The following review is for BAK42BK, which is a part of the bundle you are viewing.

Works very well with my Rockford Fosgate sub system in my car.

By Ronald on December 11, 2014

104

found this helpful.

good deal!

The following review is for BAK42BK, which is a part of the bundle you are viewing.

Pretty decent value for the price. Worked out great, thanks.

By Brett on January 29, 2015

101

found this helpful.

Usable

The following review is for BAK42BK, which is a part of the bundle you are viewing.

The wiring has done me right so far but the only thing I don't like is the speaker wires. You have to carefully split it so the wire doesn't show. Other than that minor thing everything was great and a great value!

By tyler on November 18, 2014

97

found this helpful.

price is right

The following review is for BAK42BK, which is a part of the bundle you are viewing.

the price is right for this setup. the ground wire and the power wire are to big for my amp but i made them fit. better to have to much than not enough so if i upgrade to a larger amp it will be fine.

By Mark on November 13, 2014

90

found this helpful.

Accessories for product

The following review is for BAK42BK, which is a part of the bundle you are viewing.

Just what I needed and made installation so much easier. Thanks

By Susie on February 9, 2015

84

found this helpful.

awesome products

The following review is for BAK42BK, which is a part of the bundle you are viewing.

I run 2 12inch audiobahn exursions on this amp and it pushes them very well. The size is perfect not to big and fits right unerneath the seat or small space. The best part is it stays pretty cool even after running most the day.

By CJ on March 22, 2015

78

found this helpful.

Good sub

The following review is for M-104D, which is a part of the bundle you are viewing.

This sub is worth the money. I put it in a 1.9 cb ft box that I also got from Sonic, it's ported, would not recommend sealed unless its a big box. Anyway I got this hooked to a 300 watt RF punch amp. This sub is getting about 375 rms and it takes it well. With clean deep bass and sound it's just about as loud as my cousin's Alpine Type-e subs with an Alpine amp. And his are 2 12's.

By jocelyn on March 1, 2012

84

found this helpful.

compitition worthy

The following review is for RZ1-1500D, which is a part of the bundle you are viewing.

Im using two of the rz-2300 and they're on two sounstream t-6s and they slam and they're realy durable as well.

By D.J.KEYS on December 29, 2013

75

found this helpful.

good wires

The following review is for BAK42BK, which is a part of the bundle you are viewing.

I like the wire kit I got with my amp it seems to be holding up goo it handles the power of the amp I got but I would of gave it 5 stars all the way around but I wold of like the ground at less 2 more feet for good use but over all its a nice kit

By jay on March 8, 2015

74

found this helpful.

Small to Belive

The following review is for RZ1-1500D, which is a part of the bundle you are viewing.

I had this amp pushing 2 12" BM Boschmann Sub's. Iwas very satisfy on this amp. Don't pay attention on others review on this product somebody say it can only handle 8" to 10" sub but until 2 12" sub's.
It can handle like mine in the range of 150 watts RMS up to 350 watts RMS sub's, more than that it's got little weak to handle your driver. Be sure you have to put all setting in correct matching from your HD down to EQ until to the active crossover.
it probably puts around 350 watts RMS @ 4 ohms &
500 watts RMS @ 2 ohms. I think the down side of this amp was:

1. It's get warm driven by 2 ohms load set up but not overheated or
when in protect mode.

2. It was only 70 db signal to noise ratio compare to my other mono block amp rated 500 watts RMS @ 2 ohms but it has >104 db signal to noise ratio which is louder than this amp.

The Pros:

1. the price way to affordable.

2. It's not made in china, look at the down right side of the box it say made in Korea.

3. great electronic circuit diagram when I took it out the screw at the back I need to know how it look like inside the amp.

Since I got install 2 days and Iam new with this product I gave it 3 for the Durability

By Chito Millan on August 28, 2014

73

found this helpful.

Add-ons


Similar Products

Best selling similar products

NVX QBUS8P

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

(6)

$129.99

NVX QBSTA

• 11" Spare Tire Subwoofer System
• Built-In Class D Amplifier
• Top-mount amplifier controls
• Speaker-Level Inputs
• Wired Remote Bass Level Control

$249.99

Pioneer TS-WX1210AM

• 350 watts Single 12" Subwoofer Enclosure
• 4 ohms Impedance
• Spring-loaded Terminal Posts
• Enclosure Dimensions: 10" TD x 12-1/2" BD x 19-3/4" W x 14-7/8" H

(2)

$179.99

MTX Audio TNP212D2 Terminator Dual Subwoofer Package + Amplifier

• 800W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting

(153)

$279.95

Belva BPKG210v2 Dual 10" Subwoofer and Amp Package with Box and Wiring Kit

• Works with both Factory and Aftermarket Audio Systems
• Dual 10" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

(28)

$214.99

Related Searches


2-M-104D_RZ1-1500D_BAK42BK small

Item added to your cart.

Price: $239.83

Essential add-ons
Belva BAK42 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

$59.99

$34.99

Add to cart
NVX XKIT42 100% OFC True 4 Gauge Wiring Kit with RCA Cables and Speaker Wire

The reviews speak for themselves, this is awesome wire with everything you need!

$114.99

$99.99

Add to cart
40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

$279.99

$89.99

Add to cart
Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$383.95

$235.99

Add to cart
Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

$219.00

$140.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$9.99

$7.99

Add to cart
Five Piece Installer Panel Removal Tool Kit

Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs

$18.99

$11.99

Add to cart
SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

$207.99

$199.99

Add to cart
Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

$461.99

$451.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon