Garage
Shop

West Coast Customs WCC1500.1 by MB Quart

1500W Monoblock WCC Series Class D Amplifier (Same as MB Quart OA750.1)

Product videos
highlight-star-icon

• 4 ohms: 375 watts x 1 chan.
• 2 ohms: 750 watts x 1 chan.
• 1 ohms: 1500 watts x 1 chan
• Pulse Width Modulated (PWM) MOSFET Power Supply

Learn more about the wcc15001

We apologize

This item has been discontinued

Product Highlights


• 4 ohms: 375 watts x 1 chan.
• 2 ohms: 750 watts x 1 chan.
• 1 ohms: 1500 watts x 1 chan
• Pulse Width Modulated (PWM) MOSFET Power Supply

Description


West Coast Customs brand icon

Authorized dealer


West Coast Customs WCC1600.4 by MB Quart

West Coast Customs Signature Amplifiers by MB Quart

The West Coast Customs series amplifiers are manufactured using top quality components from Maxxsonics and MB Quart known around the world. This amplifier uses the power plant found in the MB Quart OA750.1. At 1,500 watts total, its pairs well with most high output aftermarket speakers. The WCC series amps are designed with 3-way protection circuitry (thermal, overload, and speaker-short protection), making it a very reliable and heavy duty amplifier. The built-in Variable Crossovers ensure that you have the ability to set up a proper Full Range system.

West Coast Customs WCC1500.1 by MB Quart

Best Bang for Your Buck!
MB Quart
OA750.1
West Coast Customs
WCC1500.1
Your Price $149.95 $109.99
RMS Power @1ohm 750W 750W
Fuse Rating 60A x 1 60A x 1
Built-in Crossover Low-pass (LP), Subsonic Low-pass (LP), Subsonic
Forced Mass Heat Sink
Dual Speaker Outputs
Preamp RCA Outputs



  • WCC Series Single Channel Monoblock Class D Car Amplifier
  • Uses same build and design of the MB Quart OA750.1 amplifier
  • Max Power Rating:
    • 4 ohms: 375 watts x 1 chan.
    • 2 ohms: 750 watts x 1 chan.
    • 1 ohms: 1500 watts x 1 chan.
  • Pulse Width Modulated (PWM) MOSFET power supply
  • LED power (blue) and protect (red) indicators
  • Variable Bass Boost 0 to +12 dB
  • Soft start sound function
  • Mono channel operation
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-Way System Protection circuitry (thermal, overload,, and speaker short protection)
  • Dual speaker terminals simplify hookup
  • Heavy duty aluminum alloy vented heat-sink for maximum heat dissipation
  • Silver nickle-plated RCA level inputs
  • Silver nickle-plated screw terminals
  • Input sensitivity: 200mV - 6V
  • Variable low-pass filter: 40 - 150 Hz
  • Subsonic filter: 15 - 55 Hz
  • Damping factor: >180
  • Frequency response: 15-150 Hz
  • 4-gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Specifications & Details


Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
180 watts x 1 channel
RMS Power @ 2 ohms
375 watts x 1 channel
RMS Power @ 1 ohm
750 watts x 1 channel
Power Specifications - Subwoofer Channel
Peak Power @ 4 ohm
375 watts x 1 channel
Peak Power @ 2 ohms
750 watts x 1 channel
Peak Power @ 1 ohm
1500 watts x 1 channel
Amplifier Specifications
Series
WCC Series
Amplifier Class
D
Number of Channels
1 - Mono
Total Peak Power Output
1500 watts
Total RMS Power Output
750 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
1 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
0.1%
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
40 - 150 Hz
Subsonic Filter
15 - 55 Hz
Signal-to-Noise Ratio
<0.1 dB
Bass Boost
0 - 12 dB
Remote bass/level controller
Yes
Fuse Rating
60A x 1 
Strappable
No
Amp Bluetooth Connectivity
No
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

WCC1500.1

Weight:

10.10lbs

Internal SKU:

wcc15001

Internal Product ID:

96293

Product and How-to Videos


Customer Ratings & Reviews



5 star
71%
4 star
12%
3 star
12%
2 star
0%
1 star
6%



Durability
4.5
Value
4.6
Features
4.4
Design
4.4
Usability
4.6

Customer Reviews

Sort by:

Loading...

we love this amp!

This has turned out to be a great buy, I bought this for my son's car and we have been quite impressed so far, as it is pushing two JBL 12"s without straining whatsoever. We were pleasantly surprised at the build quality on the unboxing. The sales rep over the phone mentioned it was their deal of the week last week. I notice now that it is a MB Quart amp, that makes sense, I had never heard of this series so I wasn't sure what to expect. I plan on buying a similar setup for my truck soon though I may go with the 5 channel in this line.

By Robert W. on April 10, 2015

44

found this helpful.

Good buy

Works great looks good I love the remote base knob.

By 38ratrod on June 24, 2015

20

found this helpful.

Awesome amplifier for the cost!!!!

I bought this amp thinking for the price it would be average. After installing and using now I am blown away by its performance. Keep in mind it was professionally installed. I used the Belva amp kit purchased with the amp. The packaging is more than acceptable. It comes with everything needed. Very informative paperwork included on wiring. I could go on about how happy I am with this purchase but I will leave at saying you won't be disappointed.

By Justin on July 2, 2015

18

found this helpful.

Great value

Good product, good bass, very durable, recomend the amp to anyone

By Jf on September 7, 2015

9

found this helpful.

Great quality and pricing

The wcc 1500.1amp is a great addition to my much needed bottom end in my 98 Subaru Forester. I was looking for something dependable while on a tight budget. The Wcc 1500.1was exactly what i was looking for. Plenty of power for one Polk dxi 124d with power to spare. Sounds great while not putting any strain on my electrical system . Amp has the capabilities to run 2 subs up to 500rms each easily. Currently running my Polk at 2 ohms in a 1.6cft vented box and it exceeds my expectations.

By Deepq on October 10, 2015

3

found this helpful.

does well

The amps construction internally looks good. There is a cooling fan and the capacitor bank is an ok size and it's pretty close to its rated 1ohm output that it's rated for on the rms, but as for a dynamic of 1500 watts you won't see it. Mine is running 2 cadence s2w10 600 watt rms rms subs and it does a great job of with them. Mines only a month in running so logevity isn't rated here.
My trucks electrical system is consistently 14.4volt and I've run it hard from time to time and no over heat issues. This amp does good for a budget build so yeah I'll recommend it and would buy anoher depending if it goes a few years of more.

By Richard on December 11, 2015 Checkmark Icon Verified purchase

2

found this helpful.

By Anonymous Shopper on January 6, 2024

By Kevin on July 18, 2023 Checkmark Icon Verified purchase

Decent amp

Good power at a great price, easy install entry level

By Brock on December 4, 2020

Speechless

I'm running 3 JBL 1210S IN A HALF octagon box with the WCC 1500.1 MADE by MB Qaurts. I actually had to turn down the bass boost and gain and I have to say it's phenonaminal and clean sounding. Best amp I've had yet.

By 423Sounds on February 17, 2020

Add-ons


Similar Products

Best selling similar products

Alpine MRV-M500

• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier

(38)

$164.95

NVX VAD17001

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

(28)

$214.99

JL Audio JD1000/1

• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier

(2)

$399.99

Kicker CXA1800.1 (46CXA18001T)

• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier

(10)

$399.96

Crunch GP-3500.1D

• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier

(6)

$99.99

Related Searches


WCC1500.1 small

Item added to your cart.

Price: $119.99

Essential add-ons
Belva BAK42

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
Belva BAK42BK

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
Belva BAK42BL

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
InstallBay AK4ANL

Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder

$49.99

$29.99

Add to cart
Stinger SS1200XS

Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$119.00

$52.99

Add to cart
NVX XAPK4

4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire

$114.99

$84.99

Add to cart
Stinger SK4241

4 Gauge Power Amplifier Installation Kit

$129.00

$64.99

Add to cart
Stinger SK6241

4 Gauge Power Amplifier Installation Kit

$159.00

$79.99

Add to cart
NVX XMICROLOC2

Add a 2-Channel amp without replacing your factory radio

$18.49

$14.99

Add to cart
NVX XBBR2

Looking to fine tune the bass in your vehicle? Look no further

$149.99

$69.99

Add to cart
The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

$149.00

$149.00

Add to cart
NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

$18.99

$12.99

Add to cart
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

$14.99

$6.99

Add to cart
Stinger SPP680

680 Amp SPP Series Dry Cell Battery with Protective Steel Case

$269.00

$173.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon