Garage
Shop

Alpine + NVX Ultra Compact Bass Bundle

(2) Alpine SWA-10S4 10" BASSLINE Subwoofer + NVX MVPA1 Micro-V Series Monoblock Class D Compact Amplifier + 100% OFC Amp Wiring Kit

Alpine
Shop all Alpine
EXCLUSIVE
Product videos
highlight-star-icon

• 300W x 1 @ 2 ohms ,
• Dyno Rating: 476W x 1 @ 2ohms
• Single 4 ohm Voice Coil
• Polypropylene & Mica Damped Cone
• High-Excursion Poly-Foam Surround
• High Strength Custom Steel Frame
• 2" Aluminum Steel Frame
• 8 Gauge Push Pin Terminals
• CEA-2006 Compliant
• Switchable Bass Boost: (0dB/+6dB/+12dB)
• Extremely Small Footprint
• Dimensions: 4"W x 5-7/16"L x 1-9/16"H

Learn more about the 2-swa10s4_mvpa1_xkit82

We apologize

This item has been discontinued

Product Highlights


• 300W x 1 @ 2 ohms ,
• Dyno Rating: 476W x 1 @ 2ohms
• Single 4 ohm Voice Coil
• Polypropylene & Mica Damped Cone
• High-Excursion Poly-Foam Surround
• High Strength Custom Steel Frame
• 2" Aluminum Steel Frame
• 8 Gauge Push Pin Terminals
• CEA-2006 Compliant
• Switchable Bass Boost: (0dB/+6dB/+12dB)
• Extremely Small Footprint
• Dimensions: 4"W x 5-7/16"L x 1-9/16"H

Description


Alpine brand icon

Authorized dealer



Alpine SWA-10S4

250W 10" BASSLINE Single 4 Ohm Subwoofer
Quantity: 2 (Two Drivers)

General Features:

  • 10" Single 4 Ohm BASSLINE Series Subwoofer
  • Power Handling:
    • Peak: 1500 watts per pair / 750 watts per driver
    • RMS: 500 watts per pair / 250 watts per driver
    • RMS Power Range: 50-250 watts
  • Final Impedance: 2 Ohm - Wired in Parallel
  • Polypropylene & mica damped cone with Progressive Wavelet Rib (PWR) design
  • High-excursion poly-foam surround
  • Polyester progressive spider
  • Two-piece yoke with vented pole for improved air flow and voice coil cooling
  • High strength custom steel frame
  • 8 Gauge push pin terminals
  • 2" Aluminum voice coil
  • 60 oz. Single stacked magnet
  • Resonance Frequency (Fs): 32 Hz
  • Top-mount depth: 5-5/16"
  • Sensitivity: 86.5 dB
  • 1-year Sonic Electronix Warranty

NVX MVPA1

Micro-V Series 300W RMS Monoblock Class D Compact Car Amplifier (MVPA.1)
Quantity: 1

General Features:

  • MVP Series Monoblock Class D Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 200 watts x 1 chan.
    • 2 ohms: 300 watts x 1 chan.
  • Sonic Electronix Certified Power Rating*:
    • 4 ohms: 268 watts x 1 chan.
    • 2 ohms: 476 watts x 1 chan.
  • Cutting edge Micro Class D technology allows amplifier to be extremely compact
  • Pulse Width Modulated MOSFET power supply
  • LED power (green) and protect (red) indicators
  • Switchable Bass Boost (0dB/+6dB/+12dB)
  • Soft start turn-on
  • Mono channel operation
  • Speaker-level (high-level) inputs with signal sensing for automatic turn-on
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Input sensitivity:
    • Level: 0.2V-5V
  • Operating voltage: 8-16V
  • Variable low-pass filter (40-400 Hz)
  • CEA-2006 compliant amplifier
  • 8 gauge power and ground wiring is required for installation.
  • Dimensions: 4"W x 5-7/16"L x 1-9/16"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

*The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.

NVX XKIT82

100% Copper, 2-Channel True Spec 8 Gauge Amplifier Installation Kit w/ RCA Interconnect and 40 ft Speaker Cable
Quantity: 1

General Features:

  • 8 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
  • Designed specifically for car audio systems up to 600 watts RMS
  • Premium power and ground wire provides optimal power transfer
  • Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
  • Audio Interconnect RCA cables are made with twisted-pair technology for noise reduction
  • Solid Brass and satin-chromed ANL/Mini-ANL Fuse holder offers ideal protection for high powered systems
  • True-to-Gauge cables/wires meet or exceed the industry standard of copper required for the gauge size
  • Strand Count: 735
  • BC-5W2 Compliant
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 20 ft. (6.1 meters) Frosted Blue 8 gauge power wire with seamless crimp ring terminal
  2. 3 ft. (.91 meters) Frosted Gray 8 gauge ground wire with seamless crimp ring terminal
  3. 20 ft. (6.1 meters) Clear 18 gauge remote lead wire
  4. 40 ft. (12.2 meters) Frosted Gray/Blue 16 gauge speaker wire
  5. One 16 ft. (5 meters) 2-channel twisted construction RCA interconnect Cable (NVX XIV25)
  6. One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 60 amp Mini-ANL fuse
  7. One 5/16" black rubber firewall grommet
  8. Two 8 gauge spade terminals
  9. Two black 16 gauge nickel-plated spade lugs
  10. Three blue 16 gauge nickel-plated spade lugs
  11. One black 18 gauge spade terminal
  12. Two 18 gauge red butt connector
  13. Ten 4" black zip ties

Specifications & Details


Amplifier Power Specifications
RMS Power @ 4 ohms
200 watts x 1 channel
RMS Power @ 2 ohms
300 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total RMS Power Output
300 watts
Maximum Input Gauge Size
8 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
0.65%
Speaker Level Inputs
Yes
Preamp Outputs
No
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
40 - 400 Hz
Signal-to-Noise Ratio
105 dB
Bass Boost
Selectable 0/+6dB/+12dB
Remote bass/level controller
No
Fan Cooled
No
Fuse Rating
15A x 2 
CEA-2031 Compliant
Yes
Subwoofer Specifications
Series
BassLine Series
Subwoofer Size
10"
Voice Coil(s)
Single
Impedance (Per Voice Coil)
4 ohms
RMS Power Handling
250 watts
Peak Power Handling
750 watts
Woofer Surround
Poly-Foam
Woofer Composition
Polypropylene
Minimum Sealed Box Volume
0.65 cubic feet
Maximum Sealed Box Volume
1.0 cubic feet
Minimum Ported Box Volume
1.0 cubic feet
Maximum Ported Box Volume
1.75 cubic feet
Sensitivity
86.5 dB
Frequency Response
24 - 200 Hz
Xmax (millimeters)
10 mm
Top-Mount Depth (Mounting Depth)
5-5/16"
Cutout Diameter
8-15/16"
Recommended Enclosure Type
Ported / Vented
Sealed
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

2-SWA-10S4_MVPA1_XKIT82

Weight:

30.44lbs

Internal SKU:

2-swa10s4_mvpa1_xkit82

Internal Product ID:

99963

Product and How-to Videos


  • Car Subwoofer Size Buying Guide | What Size of Sub Should I Get?

Customer Ratings & Reviews



5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%



Durability
0
Value
0
Features
0
Design
0
Usability
0

Customer Reviews

Sort by:

Loading...
Sorry, no reviews found

Add-ons


Similar Products

Best selling similar products

NVX QBUS8P

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

(6)

$129.99

NVX QBSTA

• 11" Spare Tire Subwoofer System
• Built-In Class D Amplifier
• Top-mount amplifier controls
• Speaker-Level Inputs
• Wired Remote Bass Level Control

$249.99

Pioneer TS-WX1210AM

• 350 watts Single 12" Subwoofer Enclosure
• 4 ohms Impedance
• Spring-loaded Terminal Posts
• Enclosure Dimensions: 10" TD x 12-1/2" BD x 19-3/4" W x 14-7/8" H

(2)

$179.99

MTX Audio TNP212D2 Terminator Dual Subwoofer Package + Amplifier

• 800W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting

(153)

$279.95

Belva BPKG210v2 Dual 10" Subwoofer and Amp Package with Box and Wiring Kit

• Works with both Factory and Aftermarket Audio Systems
• Dual 10" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

(28)

$214.99

Related Searches


2-SWA-10S4_MVPA1_XKIT82 small

Item added to your cart.

Price: $253.08

Essential add-ons
Belva BAK82

Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects

$49.99

$29.99

Add to cart
NVX XKIT82 8-Gauge Wiring Kit

In case you didn't know, NVX has top notch wire and this kit has everything you need!

$99.99

$64.99

Add to cart
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$89.99

$59.99

Add to cart
Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$236.95

$149.95

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$9.99

$7.99

Add to cart
Five Piece Installer Panel Removal Tool Kit

Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs

$18.99

$11.99

Add to cart
SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

$207.99

$199.99

Add to cart
Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

$461.99

$451.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon