1000W RMS JX Series Monoblock Class D Subwoofer Amplifier
• Peak: 500W x 1 @ 4 ohms, 750W x 1 @ 3 ohms, 1000W x 1 @ 2 ohms
• Unregulated PWM switching type power supply
• Class D Circuitry
• Bass Boost: 0-12 dB
• Speaker-level (high-level) inputs with included harness
• Dimensions: 7.68"W x 10.94"L x 2.09"H
The JL Audio JX Series of amplifiers are designed with a specific purpose; to deliver clean, rock-solid performance and reliability at an affordable price. Unlike gimmicky price-conscious amplifiers, JL Audio employs specified oversized output transistors and rugged MOSFET power supplies to unsure proper current, thermal capacity and better overall performance. In addition, the JX1000/1D includes flexible signal processing capabilities with a fully variable 12 dB/octave crossover filter, pass-through preamp outputs and a Bass EQ. With the optional JL Audio RBC-1 Remote Level Control (sold separately), you can control the subwoofer volume from the front of the vehicle.
JX monoblock subwoofer amplifiers are specifically designed to drive subwoofers. Their frequency response is limited to the range below 150 Hz., making them unsuitable for driving midrange speakers or tweeters.
For those systems that do not offer a preamp level signal option, you can connect speaker level signals directly to the "Hi-Level Inputs" connector using the supplied connector and wire harness. Simply splice the appropriate left/right and positive/negative wires to the included harness and plug the harness into the "Hi-Level Inputs" connector on the amplifier. The JX monoblock will attenuate the high-level signal to make it compatible with its input stage. Alternatively, a traditional left/ right pair of RCA type jacks is used for preamp level (low-level) signals. This is the preferred connection method whenever available.
The JX monoblock features a 12 dB/octave low-pass active filter for its internal channel. This feature is designed to attenuate frequencies above its filter frequency, so that the system's subwoofer(s) do not reproduce any audible and often harmful mid-range frequencies. The low-pass filter is fully variable between 50 Hz and 200 Hz via the "Filter Frequency" control knob. 80 Hz is a good starting point for system tuning, but its also advisable to match the crossover point with that of your satellite speakers' high-pass filter - this ensures that your system is properly distributing the frequencies to the appropriate medium.
This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.
Internal Product ID:
33534
do u recommend to buy this amp
hey I have the same speakers as u 2 12w3v3 4 ohms does this amp give a good power to these speakers ?
40
found this helpful.Amazing amp from an amazing brand
I got this JL Audio JX1000/1D amp to replace my Kenwood KAC-9105D and I know the price is a little steep, but I know that this amp won't crap out on me like my Kenwood one did. I don't have any problems with the JL amp overheating or anything and it does exactly what it's supposed to.
36
found this helpful.Great product
Excellent product, great customer service, running jl 12" 500rms sub, sounds great
35
found this helpful.Nice Buy
Very good sound. Very easy to use and install. Fast shipping. Added what i was looking for to my 2 JL 12 in. w3s.
36
found this helpful.Crazy Amount Of Power
I have 2 JL Audio 12W3v3 4 ohms(500 RMS a piece) hooked up to this amp. I have the gain all the way down, and have never touched the bass boost. My subwoofers flex extremely hard even with the gain all the way down, which is why I am scared to test the limits of my W3's with this amp by turning up the sensitivity. I have also hooked up my friends Alpine Type R to this amp and had to run to shut the music off because the sub could not nearly handle the power of this amp despite the amp being turned down so low. This amp is power hungry so make sure your subs can handle it!
35
found this helpful.nice amp
This amp can make any subs sound clean and bump hard. Pros are that it's really durable and it can get down and dirty and ive never had it over heat and shut off atfer hours of use. Cons, none.
34
found this helpful.Plenty of Clean Power!
The JX1000/!D is another great JL Audio product that puts out plenty of clean power! The amp runs cool and continues to drive subs very well. With the price of the amp, the only addition to the amplifier that JL Audio should include is a RBC-1 control. That control would optimize all types of music!
32
found this helpful.Great Sub Maybe
I have never seen a bad review of this sub. I purchased this sub because of good reviews and the JL brand name. Nobody has mentioned a huge downside of this amp. There is no subsonic filter.
I am trying to put together a high end system and I am feeling uneasy about my purchase. I think I hear distortion because of subsonic noise. I would have chosen another option because this.
32
found this helpful.Great amp
Had this amp for six months now. Runs cool to the touch with no issues and good power.
30
found this helpful.great value!
For the price and the size of the amp u can't go wrong..its real small and it has a lot of power..i'll will give u clear and clean bass..I got 2 JL W5 flat spks on my 08 1500 Silverado crew cab and it sounds real good..
31
found this helpful.Best selling similar products
Kicker CXA1800.1 (46CXA18001T)
• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Class D 1 ohms Stable Monoblock Amplifier
(5)
$399.96
• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 1000W
• CEA-2006 Compliant Amplifier
• 4-Channel Speaker-Level Inputs
• Heavy Duty Aluminum Alloy Heat-Sink
• Dimensions: 7-7/8"W x 7-7/8"L x 2-3/16"H
(33)
$169.95
• NexD Switching Technology
• Differential-balanced Inputs
• 1000W Class D Mono-block
• Compact and Powerful
(1)
$399.99
• Vega Series Class D Mono 600W Amplifier
• RMS Power: 400W x 1 @ 2 Ohms
• RMS Power: 240W x 1 @ 4 Ohms
• MAX Power: 600W x 1 @ 1 Ohm
• Surface Mount Component Technology
• Compact Universal All-Weather Application
• Variable/Switchable Crossovers On Multi-Channel Models
$339.99
• 500 Watt True RMS Output!
• Marine Certified Monoblock Micro Class D Amplifier
• 180W x 1-Chan. @ 4 ohms
• 320W x 1-Chan. @ 2 ohms
• 500W x 1-Chan. @ 1 ohms
• 3-Way System Protection
• 8 Gauge Power and Ground Inputs
• Extremely Small Footprint
(4)
$169.99
Save up to 10 different vehicles in your garage