Rockford Fosgate Prime R1200-1D

1200W RMS Prime Series Class-D Monoblock 1-Ohm Stable Amplifier

Out of stock
Product videos
highlight-star-icon

• RMS: 400W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total RMS Power: 1200W
• CEA-2006 Compliant
• Tuned Bass EQ: 0 to +18 dB
• Class D Circuitry
• Dimensions: 6-3/4"L x 11-1/16"W x 2"H

Learn more about the r12001d
List $409.99

$379.99

with warranty

Thanks , You Pay:

Heads up

We confirm fitment and offer accessories for speakers. Please set your vehicle first if you would like to purchase more than one r12001d.

Set your vehicle or Return to product page
Dollar Icon
VIP Product Get $38.00 in rewards to spend later
Quantity
Out of stock - Order risk-free, cancel any time.
Brand new

No Credit Option

Flexible Lease Payments

Early Purchase Options

Quick Approval Decision


protection

Add an extended warranty

allStateProtection
3-years for

For over 22 years, we've been your X-Factor – the team dedicated to having the biggest impact on your shopping experience!

AwardWinning
Award-Winning Service
Shipping
FREE Shipping Orders $49+
60Days
60-Day Easy Returns
lowestPrice
Guaranteed Lowest Price
inHouseExpert
In-House Experts

Product Highlights


• RMS: 400W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total RMS Power: 1200W
• CEA-2006 Compliant
• Tuned Bass EQ: 0 to +18 dB
• Class D Circuitry
• Dimensions: 6-3/4"L x 11-1/16"W x 2"H

Description


Rockford Fosgate

Authorized dealer



General Features:

  • Rockford Fosgate Prime Series R1200-1D
  • Class-D 1-Ohm Stable Monoblock Amplifier
  • RMS Power Rating:
    • 4 ohms: 400 watts x 1 chan.
    • 2 ohms: 800 watts x 1 chan.
    • 1 ohm: 1200 watts x 1 chan.
  • CEA-2006 Compliant Amplifier
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Soft start turn-on
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heat-sink for extreme heat dissipation
  • Input sensitivity: 150mV - 4V
  • Frequency Response: 20 - 250Hz
  • Total Harmonic Distortion (THD): <1.0%
  • Signal to Noise Ration: 100dB
  • Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
  • Subsonic (infrasonic) filter: 15 - 40 Hz , 12 dB/octave
  • Variable Bass Boost: 0 to +18 dB bass boost at 45 Hz
  • Fuse Rating: 150A x 1 (recommended, not included)
  • 12 AWG speaker wire gauge outputs
  • 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Weight: 7.825 lbs
  • Dimensions: 11.06"W x 6.77"L x 1.97"H
  • Also Found As: Prime 1200 Watt, R12001D, R1200, R12001
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Check out the Rockford Fosgate Prime R1200-1D Owner's Manual

Product history:

Rockford Fosgate R1200-1D thumbnail
(newest, current model)
Rockford Fosgate R1000-1D thumbnail
(previous model, replaced by Rockford Fosgate Prime R1200-1D)

Specifications & Details


Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
400 watts x 1 channel
RMS Power @ 2 ohms
800 watts x 1 channel
RMS Power @ 1 ohm
1200 watts x 1 channel
RMS Power @ .5 ohm
Power Specifications - Subwoofer Channel
Peak Power @ .5 ohm
Amplifier Specifications
Series
Prime Series
Marine Certified
No
Amplifier Class
D
Number of Channels
1 - Mono
Total Peak Power Output
2400 watts
Total RMS Power Output
1200 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
1 ohms
Minimum Impedance Bridged
Not Bridgeable
Frequency Response
THD at Rated RMS Power
1.0%
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Subsonic
Low-Pass Crossover Frequency
50 - 250 Hz
Subsonic Filter
15 - 40 Hz
Signal-to-Noise Ratio
100 dB
Remote bass/level controller
Yes
Fan Cooled
No
Fuse Rating
150A In-Line Fuse Required
Strappable
No
CEA-2031 Compliant
Yes
Sonic Certified Amplifier
Not Tested
Amp Bluetooth Connectivity
No
Hi-Res Certified
No
Low-Level Input Sensitivity
High-Level Input Sensitivity
What is in the box?
Paperwork
User manual
WITB: Amplifiers
Amplifier
Wired gain knob (wire attached)
Mounting screws (4)
Allen wrench
Other Accessory #6
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

R1200-1D

Weight:

5.90lbs

Internal SKU:

r12001d

Internal Product ID:

34764

Product and How-to Videos


  • 3Sixty3 Aftermarket Setup Wizard Tutorial
  • Rockford Fosgate Prime Series Amplifiers
  • How To Install an Amplifier: Car Amplifier Basics Part 2

Customer Ratings & Reviews



5 star
88%
4 star
10%
3 star
2%
2 star
0%
1 star
0%



Durability
5
Value
4.9
Features
4.9
Design
4.9
Usability
4.9
Sort by:

Loading...

Amazing Amp

This amp is an absolute monster at putting out wattage! I was surprised with how small this thing is too especially since it puts out so much! The only problem I had with this amp was that the description says it fits 0 gauge although there is no way that it fits 0 gauge, I had to buy special adapters to compensate for this although not a big deal in the long run!

By Kevin on November 14, 2014

54

found this helpful.

Rockford prime 1500

Installed this amp to run two 10" Rockford Fosgate P3 shallows and it hits.very pleased with price,shipping and quick service.

By Me on March 17, 2014

52

found this helpful.

Excellent amp for the price

I have this amp pushing 2 Kenwood shallow mount 12-inch subs in my truck. The birth sheet on mine said 1300 watts even, and I have no doubt it puts out that much power. I also have a Prime 400-4D running my Kenwood components in the doors. Maybe they don't have some of the ultra-cool, competition-level amp features found on more expensive amps, but that's not what I bought them for. I like how this amp sounds, and I don't intend to enter any sound competitions anyway. I can't even turn the system all the way up and stay in the truck; that's how loud it is. And even in 95-degree Florida Panhandle weather, neither of my Prime amps get very warm. I would definitely recommend this unit for anyone wanting to add some serious power to their system without having to spend large sums of cash.

By Stephen on September 15, 2014

50

found this helpful.

Great Amp

This amp puts out more than it is rated, the birth sheet on my amp said 1300 watts rms. Overall it's a great amp for the money.

By Cole on September 24, 2014

50

found this helpful.

lots of power for the price

My birth sheet said 1,313 watts at 1 ohm. Can't really beat that for the price. Small amp with a lot of power. I recommend upgrading your battery though. My lights dim a lot on my stock battery. It accepts 4 gauge wire but I would recommend running 1 gauge wire to the trunk then use a 1 gauge to 4 gauge distribution block so you will only have about 1 or 2 feet of 4 gauge for more juice to the amp. It does not have a built-in fuse so you need to buy a fuse holder.

By shaun on February 2, 2014

50

found this helpful.

Works Amazingly

This amp blew me away. I replaced my POS kenwood kac-9105d amp with this and the difference was night and day. I've owned the amp for 6 months had have had no problems with it. It never overheats, even in the 90+ degree heat. My only complaint is hooking up the power and ground cables. 1. The power is on the right when it is traditionally on the left. I almost blew the fuses the first time I hooked it up and since the fuses are internal, I would've had a completely dead amp. My friend did this with his amp and he had to buy a whole new amp. And 2. Fosgate recommends 2-gauge power and ground cable for this amp but I can just BARELY fit my 4-gauge wire into it. It takes me forever to get the power cable in correctly. Not to mention i have the amp mounted on the back of my sub box out of sight, and the terminals are faced inward towards the box! How stupid is that? So not only is it nearly impossible to fit 4-guage wire into it, but you can't see what the hell you're doing either. And they made all their amps like this! Honestly, they could have done things better and made things a lot simpler.

By John on May 26, 2014

49

found this helpful.

Awesome Value

I purchased this for a quick replacement for a 5 year old MTX amp that went out; I was very surprised how great this amp sounds with my 2 Rockford Fosgate P3SD412 subs considering how inexpensive and small it is!!!

By Joby on December 27, 2011

49

found this helpful.

Great amp!

Great amp, compact aids in install and price is fair.

By Jr. on January 30, 2014

46

found this helpful.

amazing buy

Bought this amp to push 1 kicker 12" l7 @ 2 ohms but then I got rid of that sub and got my hands on 2 kicker l5 15's running @1ohm. This amp does a lot more power than it says it can.. By far the best purchase I've ever made. Rememeber people, YOU GET WHAT YOU PAY FOR! If you buy this amp, you will NOT be disappointed!!

By will on August 7, 2013

38

found this helpful.

Second To None!

This is a very powerful amp in a very small package. I paired it with two Rockford Fosgate P3's in a bandpass box. I would definitely recommend it for those wanting the most for their money.

I only have one complaint...the website states that this amp accepts a 0/1 gauge wire for power, but it doesn't. 4 AWG is the largest size that will fit.

Overall it is an excellent product at a very low price.

By Medic Mike on September 20, 2013

38

found this helpful.

Add-ons


Similar Products


This product is temporarily out of stock. May we recommend...

Kicker CXA1800.1 (46CXA18001T)

• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Class D 1 ohms Stable Monoblock Amplifier

(5)

$399.96

Alpine MRV-M500

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 1000W
• CEA-2006 Compliant Amplifier
• 4-Channel Speaker-Level Inputs
• Heavy Duty Aluminum Alloy Heat-Sink
• Dimensions: 7-7/8"W x 7-7/8"L x 2-3/16"H

(33)

$169.95

JL Audio JD1000/1

• NexD Switching Technology
• Differential-balanced Inputs
• 1000W Class D Mono-block
• Compact and Powerful

(1)

$399.99

Cerwin-Vega VCU81

• Vega Series Class D Mono 600W Amplifier
• RMS Power: 400W x 1 @ 2 Ohms
• RMS Power: 240W x 1 @ 4 Ohms
• MAX Power: 600W x 1 @ 1 Ohm
• Surface Mount Component Technology
• Compact Universal All-Weather Application
• Variable/Switchable Crossovers On Multi-Channel Models

$299.99

NVX XAD17

• 5200 watts x 1 channel @ 4 ohms
• 8100 watts x 1 channel @ 2 ohms
• 13500 watts x 1 channel @ 1 ohm
• Total RMS Power: 13500 watts
• Frequency Response: 10 - 300 Hz
• CEA-2006 Compliant Amplifier

$999.99

Related Products


This item is frequently compared to these items

SMD DD-1 Distortion Detector/Analyzer

Distortion Detector/Analyzer (DD1) • Distortion Detector's Circuitry Is 100% Analog • Distortion Detection Trigger Level > 1.0% Harmonic Distortion • Operating Range of Input Signal is 1.2Vrms – 125Vrms. (15,000 Watts at 1 ohm) Autoranging • Signal Present LED Trigger Voltage 750mVrms

(98)

$219.95

SMD CC-1 Crossover Calibrator

Crossover Calibrator • Also Matches The Gain Settings On Amp(s) • Circuitry Is Digital Microprocessor Controlled • Crossover -3dB Point Accuracy +/- 0.25dB • Auto-Shut Off Timer

(17)

$185.99

Steve Meade Designs IM-SG

• Impedance Meter/Signal Generator
• Obtains Driver's T/S Parameters
• Find Tuning Frequency of Passive Radiator
• Locate Rattles in Vehicle

(4)

$451.99

Belva BAK42BK

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1200 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 2-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 80 amp fuse
• Complies to American Wire Gauge standards

(30)

$34.99

Belva 1.0 Farad Capacitor + Belva 2000 Watt Max Handling Amp Kit (Black/Grey)

• Complete 4 Gauge 2-Channel Amplifier Installation Kit
• 1.0 Farad Capacitor
• Designed Specifically For Car Audio Systems Up to 1000 Watts RMS (2000 watts MAX)
• Premium Power and Ground Wire Provides Optimal Power Transfer
• 30% Copper CCA Wire
• Perfect for Systems up to 1000 Watts
• Audible Warning
• Red Voltage Display
• Mounting Brackets Included

(1)

$59.99

Related Searches


Item Added to Cart.


allStateProtection
  • 5-day service guarantee
  • Covers product failure
  • 100% parts and labor
+ show more
You have added a warranty
$44.99
Add Warranty
3-years of protection

Our recommended add-ons
2-Channel Line Out Converter

2-Channel Line Out Converter

$79.99

Add
NVX XBBR2

Looking to fine tune the bass in your vehicle? Look no further

$89.99

Add
X Series RCA Interconnect Cable

16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors

$19.99

Add

Add vehicle

Save up to 10 different vehicles in your garage

Loading...
< Back