Expert Service 1-877-289-7664 [Hours]

Need to power your aftermarket speakers? Check out our quality 2 channel amplifiers perfect for powering your front or back speakers. Shop all two channel amps now.
Narrow Your Results
Price range:
$18.50 $1049.99
$
to
$

Minimum Impedance Unbridged:

Sonic Certified Amplifier:

CEA-2006 Compliant:

Amp Bluetooth Connectivity:

2-Channel Amplifiers

1000W Max Bridgeable 2-Channel Class A/B PDX Series Car Amplifier

Power One Series 2-Channel Class A/B Car Amplifier • 1000W Max • 250W x 2-Chan @ 2 Ohm • SEPP Analog Amplifier • Selectable Bass Boost • Speaker-Level Inputs • Preamp RCA Outputs • 3-Way System Protection Circuitry

Get 20% off an NVX Universal Remote Level Control!

$54.99

IN STOCK

2600W Max ATA Series Bridgeable 2-Channel Class A/B Sonic Electronix Exclusive Car Amplifier

• 650 Watts Max x 2 @ 4 ohms
• 1300 Watts Max x 2 @ 2 ohms
• 2600 Watts Max x 1 @ 4 ohms, Bridged
• SEPP (Single Ended Push-Pull) Output Technology
• Speaker-level (high-level) inputs
•Frequency Response: 30 - 12,000 Hz
• Variable high-pass filter: 60 - 12,000 Hz, 12 dB/octave
• Variable low-pass filter: 30 - 250 Hz, 12 dB/octave

Get 20% off an NVX Universal Remote Level Control!

$84.99

IN STOCK

500W RMS PA D Series Class-D 2-channel Car Amplifier

• 125 Watts RMS x 2 @ 4 ohms
• 250 Watts RMS x 2 @ 2 ohms
• 500 Watts RMS x 1 @ 4 ohms, Bridged
• Mono or 2-Channel Operation
• CEA-2006 Compliant
• Signal to Noise Ration: 105 dBA
• Selectable crossover modes: FULL / HPF / LPF
• Dimensions: 6-3/4" W x 8-1/4" L x 1-13/16" H

Buy a JL Audio 12W3v3-4 and Save Big on a Matched Amp!

$139.95

IN STOCK

2400W Max 2-Channel Class A/B Auto Sound Series Car Amplifier (ASA 1200.2x)

• 300 Watts RMS x 2 @ 4 ohms
• 600 Watts RMS x 2 @ 2 ohms
• 1200 Watts RMS x 1 @ 4 ohms, Bridged
• Total Peak Power: 2400 Watts
• 2 or Mono channel operation
• Frequency Response: 20 - 22,000 Hz
• 3-Way System Protection circuitry (thermal, overload, and speaker short protection)

Limited Offer: 15% off a Belva Wiring + Capacitor Kit!

$179.95

IN STOCK

640W Peak (320W RMS) Xtreme Series Class-D Mini 2-Channel 2-Ohm Stable Amplifier

• 80 Watts RMS x 2 @ 4 ohms
• 160 Watts RMS x 2 @ 2 ohms
• Total Peak Power: 640 Watts
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Dimensions: 7.1"W7.6"L 2.0 "H

Get 20% off an NVX Universal Remote Level Control!

$89.99

IN STOCK

1500W Max (600W RMS) Full Range Class A/B 2-Channel Amplifier

• 170 Watts RMS x 2 @ 4 ohms
• 300 Watts RMS x 2 @ 2 ohms
• 600 Watts RMS x 1 @ 4 ohm, Bridged
• Total Peak Power: 1500 Watts
• 1 Pair of Preamp Outputs
• Variable low-pass filter (50-250 Hz, 12 dB/octave)
• Variable high-pass filter (50-250 Hz, 12 dB/octave)
• Dimensions: 12.25"W x 8"D x 2.25"H

Free 4 Gauge Installation Kit with Purchase!

$129.99

IN STOCK

CHAOS EPIC Series 100 Watts 2-Channel Class AB Mini High Power Amplifier

• RMS: 25W x 2 @ 4 ohms, 50W x 2 @ 2 ohms
• Total Peak Power: 100W
• CEA-2006 Compliant/Preamp Outputs/LPF
• 4"W x 3-1/4"D x 1-5/8"H

$21.99

IN STOCK

300W 2-Channel Class AB Mini Amplifier With 3.5mm Input

• RMS Power: 15W x 2 @ 4 ohms
• Total Peak Power: 300W
• 3.5mm AUX Input/0.125" Stereo Inputs
• Dimensions: 2.99"W x 3.94"L x 1.4"H
• 3 Way Electronic Crossover Network
• Adjustable Gain Control

Get 20% off an NVX Universal Remote Level Control!

$18.50

IN STOCK

Only 2 Left!

200W EVOLUTION Series Class AB 2 Channel Power Amplifier

• 50W x 2 Chan. @ 4 Ohms
• 100W x 2 Chan. @ 2 Ohms
• Soft Turn-On Circuit
• Nickel-Plated Terminals
• Variable Bass EQ

Get 20% off an NVX Universal Remote Level Control!

$22.95

IN STOCK

R1200-1D 1200W RMS Prime Series Monoblock Class D Car Amplifier + BAK42 Complete CCA 4 Gauge Amplifier Wiring Kit with 2-Channel RCAs

• R1200-1D 1200W RMS Prime Series Monoblock Class D Car Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

$323.38

IN STOCK

250W Max (125W RMS) DX-Series 2 Channel Amplifier

• RMS Power: 30W x 2 @ 4 ohms, 60W x 2 @ 2 ohms
• Signal to Noise Ratio: >95dB
• CEA-2006 Compliant
• >Dimensions: 8-1/8" W x 7-3/16" D x 2-3/8" H

VIP Guarantee - FREE 2-Day Shipping,
10% Rewards, Extended Warranty and more!

Get 20% off an NVX Universal Remote Level Control!

$89.90

IN STOCK

Only 3 Left!

1000 Watt POWERX Series 2-channel Car Audio Amplifier

• 250 Watts RMS x 2 @ 4 ohms
• 500 Watts RMS x 2 @ 2 ohms
• 1000 Watts RMS x 1 Bridged @ 4 ohm
• Total Peak Power: 1000 Watts
• Speaker-level (high-level) inputs
• Variable high-pass filter: 120 - 3000 Hz
• Variable low-pass filter: 50 - 250 Hz
• Variable Bass Boost: 0 to +12 dB bass boost

Get 20% off an NVX Universal Remote Level Control!

$54.95

IN STOCK

1100W Max V-Drive Series 2-Channel Class AB Car Audio Amplifier

• 1100 Watts Max
• 550 Watts x 2 Chan. @ 2 Ohms
• 3-Way System Protection
• Selectable Highpass/Lowpass Filters

Get 20% off an NVX Universal Remote Level Control!

$59.99

IN STOCK

400W Max 2-Channel/Bridgeable Class AB Performance Series Car Amplifier

• 60 Watts RMS x 2 @ 4 ohms
• 75 Watts RMS x 2 @ 2 ohms
• 150 Watts RMS x 1 @ 4 ohms, Bridged
• Total Peak Power: 400 Watts
• CEA-2006 Compliant
• Speaker-level (high-level) inputs with Auto Turn-On
• Nickel plated RCA, Power/Ground and Speaker connections
• Signal to Noise Ration: 95 dB

Get 20% off an NVX Universal Remote Level Control!

$64.99

IN STOCK

8" Dual 2 ohm Solo-Baric L7 900W Car Subwoofer + 500W RMS PA D Series Class-D 2-Channel Amplifier

• 900W Peak
• 450W RMS
• Titanium deposit Impregnated Cone Woofer with Rolled Outer Edge
• Santoprene Rubber Surround
• Highly-Efficient UniPlate™ Pole-Piece and Back Plate
• 125 Watts RMS x 2 @ 4 ohms
• 250 Watts RMS x 2 @ 2 ohms
• 500 Watts RMS x 1 @ 4 ohms, Bridged
• Mono or 2-Channel Operation
• CEA-2006 Compliant
• Signal to Noise Ration: 105 dBA
• Selectable crossover modes: FULL / HPF / LPF

$339.95

AVAILABLE

Ships at Later Date

6000W Max Vector Series 2-Channel High-Power Mosfet Amplifier

• 300 Watts RMS x 2 @ 4 ohms
• 600 Watts RMS x 2 @ 2 ohms
• Bridged, 4 ohms: 3000 watts x 1 chan.
• Total Peak Power: 6000 Watts
• Variable high-pass filter: 40 - 250 Hz
• Variable low-pass filter: 40 - 250 Hz
• Subsonic filter: 10 - 100 Hz , 24 dB/octave
• Dimensions: 10.63"W x 21.97"L x 1.78"H

$146.99

IN STOCK

Only 3 Left!

750W 2-Channel Powerzone Series Class AB Car Amplifier

• 165 Watts x 2 @ 4 ohms
• 325 Watts x 2 @ 2 ohms
• 750 Watts x 1 @ 4 ohms, Bridged
• Speaker-level (high-level) inputs
• 2 channel or mono operation
• Signal to Noise Ration: >90 dB
• Variable Bass Boost: 0 to +9 dB bass boost at 45 Hz
• Dimensions: 9.29" L x 7.87" W x 2.17" H

Get 20% off an NVX Universal Remote Level Control!

$49.99

IN STOCK

600W Peak (200W RMS) Anarchy Series Class-AB 2-Channel 2-Ohm Stable Amplifier

• Max Power: 150W x 2 @ 4 ohms, 300W x 2 @ 2 ohms
• Total Peak Power: 600W

• Dimensions: 10" W x 7-12/25" L x 2-9/16" H

Get 20% off an NVX Universal Remote Level Control!

$53.95

IN STOCK

400W Peak (180W RMS) 2-Channel A Series Bridgeable Class AB 2-Ohm Stable Car Amplifier

• RMS: 60W x 2 @ 4 ohms, 90W x 2 @ 2 ohms
• Total Peak Power: 400W
• CEA-2006 Compliant
• Dimensions: 9-1/2"W x 7"L x 2-1/2"H

Get 20% off an NVX Universal Remote Level Control!

$69.99

IN STOCK

500W RMS PA D Series Class-D 2-channel Car Amplifier + 500W RMS 10" W3v3 Series Single 4-Ohm Subwoofer

• Injection-molded, mineral-filled polypropylene cone
• Nitrile butadiene rubber surround
•Customization trim ring
• Floating Cone Attach Method
• DMA Optimized Motor
• Mono or 2-Channel Operation
• CEA-2006 Compliant
• Signal to Noise Ration: 105 dBA
• Selectable crossover modes: FULL / HPF / LPF

$326.95

IN STOCK

Items per page: 20 50 100

Related Categories

Amplifier Wiring Kits
Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits. Amplifier wiring kits come with your basic power and ground cables, as well as other necessary wires. Select complete amplifier kits will include speaker wire, RCA interconnect cables, and more! To make sure you get the kit that is best designed for your car audio system, scroll down to the bottom of this page for the buying guide.
Capacitors
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Sound Processors
For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers. Click here to learn more about digital sound processors and to find out which type would be best for your car audio system.

2-Channel Amplifiers Information

2-Channel Amplifiers

A 2 channel amplifier is an amp that can operate two channels. It is basically two 1-channel amplifiers in a single box. This unit is usually intended for operating a left speaker and a right speaker.

A channel is the signal and power combination intended for one specific speaker. A car stereo audio system usually has a left channel and a right channel. More advanced audio systems may have separate channels for different types of speakers (midrange, subwoofer, and tweeter) or for rear channels (surround).

A bridged 2 channel amplifier is constructed in such a way that the amplifiers can be set up to operate inline providing the effect of a more powerful one channel amplifier. If durability is a concern, a bridgeable two channel amplifier used for two channels tends to work well because it's likely to have higher quality or just more diodes during bridged operation. Using a more powerful amplifier with the gain turned down is also a good idea if longevity is a concern.