In-Car Full Digital Sound Processor and Pair of High Res Tweeters
• Z3 Processor
• Custom Developed LSI
• Modern Black Aluminum Finish components
• 32-Bit SHARC® DSP (Digital Signal Processor)
• Full Digital Tweeter
• 1" Polyester Fiber Soft Dome Tweeter
• Commander Control Module
• Z3 Processor
• Custom Developed LSI
• Modern Black Aluminum Finish components
• 32-Bit SHARC® DSP (Digital Signal Processor)
• Full Digital Tweeter
• 1" Polyester Fiber Soft Dome Tweeter
• Commander Control Module
The Z3 system is designed to improve full digital playback quality. The Z3 system consists of the Z3 processor, Full Digital Tweeters and the Commander Control Module. This is the perfect start for the Full Digital Sound system by Clarion. Adding the NX706 Full Digital Sound head unit, Z7 speakers and Z25W subwoofer will give you the Full Digital Sound System.
The Full Digital Sound (FDS) maintains the digital signal up until you hear it so there is no loss in fidelity of the signal. The system is extremely efficient, using about 1/5th of most car audio systems. The LSI is a high output microchip that transforms electrical energy into sound pressure to further boost the output of digital sound. The Z3 processor accepts various digital and analog inputs and outputs so the system can be used with different sources including car stereos.
With a traditional system, digital-to-analog conversion turns the digital signal into an analog signal that’s boosted by an amplifier to drive the speakers. The Clarion Full Digital Sound System uses an LSI (Large Scale Integration) chip on each speaker to modulate the 12-volt power supply voltage which then drives the speaker - adding the program and power together.
The DC voltage and digital information essentially travels along the same wires. The voltage and digital combines via the LSI chip. The speaker's 6 voice coils combine their driving energies together to transform the electrical signals to mechanical motions to produce sound. This allows the system to draw little current which is ideal for vehicles without a lot of extra power for a big sound system.
Best selling similar products
• 15 Band Parametric EQ
• 8-Channel RCA Outputs
• Provides up to 2 Volts of output
• Fully adjustable High and Low-pass filters
• Time alignment in 0.02 ms increments
(3)
$109.99
List price $131.99
• Plug and Play T-harness for faster installation
• For select 2019-2024 vehicles from Chevrolet, GMC, Cadillac
• Designed for Ethernet amplifiers
• Designed to be used with factory radios
• Selectable 31-band graphic EQ or 5-band parametric EQ
• Settings adjusted via Bluetooth in a smart device
• Selectable high pass, low pass, or bandpass filters
(3)
$517.99
List price $613.99
• Plug and Play T-harness for faster installation
• For select 2010-2021 vehicles from Chevrolet, GMC, Cadillac
• Designed for MOST amplified systems
• Designed to be used with factory radios
• Selectable 31-band graphic EQ or 5-band parametric EQ
• Settings adjusted via Bluetooth in a smart device
• Selectable high pass, low pass, or bandpass filters
$638.99
List price $709.99
• Premium matrix digital sound processor
• 8-Channel preamp input and 10-Channel preamp output
• 30-Band equalizer for adjusting gain, delay, and polarity
• High-pass, low-pass and band-pass crossovers
• Features GTO signal sensing, MILC clip detection, and AccuBASS
• Also features signal summing and signal delay
(8)
$829.00
List price $1109.00
• Digital Signal Processing with Integrated Maestro CAN Interface
• Four channel high level inputs with signal sense turn on
• 18 Pin Analog Input and 16 Pin Analog Output Harness
• Interactive Tuning Interface Controlled via Android/iOS APP
$419.99
List price $419.99
• OEM integration digital signal processor
• 24-bit DSP processor and quad 1/3 octave equalizers
• 8-input and 6-output channels
• Access four user-adjustable 10-band graphic equalizers
• 30-second single button calibration
(14)
$529.99
List price $529.99
• 8-Channel digital signal processo
• 80 total bands of equalization
• TüN software offers quick input/output setup
• 8 RCA inputs or 1 optical input
• Includes DRC-200 digital remote control
(10)
$579.99
List price $579.99
• Plug and Play T-harness for faster installation
• For select 2020-2025 vehicles from Ford
• Designed for non-amplified systems
• Can be used with factory and aftermarket radios
• Selectable 31-band graphic EQ or 5-band parametric EQ
• Settings adjusted via Bluetooth in a smart device
• Selectable high pass, low pass, or bandpass filters
(1)
$533.99
List price $593.99
• 8-Channel Digital Sound Processor
• 7-Band parametric equalizer
• Speaker level (high-level) inputs
• Bluetooth for for added control
• High-resolution audio
• Configurable via S8 DSP application/software
$419.99
List price $455.00
• Digital Signal Processor (DSP) Interface and Harness
• Designed to integrate aftermarket amplifier with OEM systems
• All programming done using the Axxess DSP XL app
• 31-band graphic equalizer
• 5-band parametric equalizer per channel
• Designed for
(3)
$641.99
List price $713.99
Manufacturer:
Model Number:
Z3-2
Weight:
5.00lbs
Internal SKU:
z3
Internal Product ID:
106651
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Clarity is real
You heard the hype and the skeptical part of me says yeah right.. digital audio.. welp, it lived up to the hype. I have these in my ride along w/ the full FDS system and I have never owned a better system. 5/5
1 found this helpful
V-Series: 5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable
(25)
$29.99
List price $49.99
V-Series: 5m (16.40 ft) 2-Channel RCA Audio Interconnect Cable
(43)
$12.99
List price $18.99
X-Series: 5m (16.40 ft) 2-Channel RCA Audio Interconnect Cable
(24)
$19.99
List price $29.99
• Premium matrix digital sound processor
• 8-Channel preamp input and 10-Channel preamp output
• 30-Band equalizer for adjusting gain, delay, and polarity
• High-pass, low-pass and band-pass crossovers
• Features GTO signal sensing, MILC clip detection, and AccuBASS
• Also features signal summing and signal delay
(8)
$829.00
List price $1109.00
• 125 watts x 4 channel @ 4 ohm
• 200 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class 2 ohm Stable 4-Channel-Channel Amplifier
(3)
$549.00
List price $989.00
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
