Expert Service 1-661-257-9993 [Hours]

Rockford Fosgate R500X1D with Power Wiring Kit and RCAs

500W RMS Prime Series Class D Monoblock Amplifier + 4 Gauge Full Spec CCA Amplifier Wiring Kit for Systems up to 650 Watts

List price $329.97

You Save: $167.00 (50.61%)

Thanks , You Pay:

$162.97

with warranty

+ FREE Shipping in US 48

Arrives by Tuesday, Dec. 13 to zip 20147

Add an Extended Warranty

SquareTrade Product Warranty
60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Item Added to Cart

Rockford Fosgate R500X1D with Power Wiring Kit and RCAs

500W RMS Prime Series Class D Monoblock Amplifier + 4 Gauge Full Spec CCA Amplifier Wiring Kit for Systems up to 650 Watts

$162.97

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$19.99
Add Warranty
3 years of protection

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

This Big 3 Kit features HyperFlex cable and comes with everything you need to upgrade your factory power and ground wire.

$141.83

Add
XS Power XP750 Special Edition

12-Volt Deep Cycle AGM Power Cell with 600 Max Amps

$72.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Rockford Fosgate R500X1D with Power Wiring Kit and RCAs.

Get FAST answers from customers ASK a Question See questions answers

Rockford Fosgate Audio Store

Rockford Fosgate Prime R500X1D

Rockford Fosgate R500X1D - Prime Series Class D Monoblock Amplifier

The R500X1D is a 500 watt mono amplifier using efficient Class-D circuit topology. This amplifier is capable of running a 2-Ohm load and includes on-board Punch Bass and remote Punch Level Control. Like all Rockford Fosgate amplifiers, the R500X1D's power ratings conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.





Rockford Fosgate Prime R500X1D

500W RMS Prime Series Class D Monoblock Amplifier
Quantity: 1

General Features:


 

 
  • Prime Series Class D Monoblock Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 300 watts x 1 chan.
    • 2 ohms: 500 watts x 1 chan.
  • CEA-2006 compliant amplifier
  • Efficient Class-D circuit topology
  • 12dB/octave Butterworth crossover
  • RCA pass-thru outputs
  • On-board Punch EQ with +18dB boost @ 45Hz.
  • High level inputs
  • Remote PLC (Punch Level Control)
  • 0/180 Phase Switch
  • Real time output and power supply thermal sensing

  •  
  • Cast aluminum heatsink
  • 4 Gauge power/ground connectors
  • MOSFET power supply
  • Over current protection
  • Short circuit protection
  • Muted turn on
  • Frequency Response: 20 - 250 Hz +/- 1 dB
  • Efficiency: 89% @ 4-ohm
  • Total Harmonic Distortion: <1.0%
  • Signal to Noise Ratio: >100 dB
  • Damping Factor: >200 dB
  • Input Sensitivity: 150 mV - 4V
  • Recommended Fuse: 50A x 1 (not included)
  • 8-gauge speaker wire terminals
  • 4-gauge power and ground wiring is recommended for installation.
  • Dimensions: 8.50"L x 6.80"W x 2.00"H
  • 1-year Manufacturer's Warranty


Check out the Rockford Fosgate R500X1D Owner's Manual

TruConnex TC4KIT-42B by Metra

4 Gauge Full Spec CCA Amplifier Wiring Kit for Systems up to 650 Watts
Quantity: 1

General Features:

  • 4 gauge Power Amplifier Installation Kit
  • Designed specifically for car audio systems up to 650 watts
  • Premium power and ground wire provides optimal power transfer
  • Twisted RCA audio interconnect cable engineered to the highest quality
  • Terminals are Nickel-plated for excellent signal transfer
  • ANL Fuse holder offers ideal protection
  • True-to-Gauge cables/wires meet or exceed the industry standard of copper required for the gauge size
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Package Includes:

  1. 17 ft. of 4 AWG Red power cable
  2. 3 ft. of 4 AWG Gray ground cable
  3. 16.40 ft. Gray 2-Channel RCA Audio Cables
  4. 17 ft. of Blue remote turn-on wire
  5. In-line mini ANL fuseholder
  6. 60 Amp ANL fuse
  7. Ring Terminals
  8. Ground Terminals
  9. Vinyl Cable Ties
  10. Screws
  11. Spade Terminals
  12. Grommets

Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
300 watts x 1 channels
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
500 watts x 1 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

500 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Not Bridgeable
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
<1.0%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 250 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
>100 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 18 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
50A X 1 In-Line Fuse Recommended
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes

Amplifier Kit Specifications

Number of Amplifiers Supported
This is the number of amplifiers that the amplifier kit can support. If you are are going to be powering more than one amplifier, make sure that the installation kit will support them.
1
Power/Ground Wire Size
The power/ground gauge numbers represents the main wire size of the amplifier kit.

Definitions are as follows:

Gauge (wire) - The diameter of a wire. The higher the number, the thinner the wire. Example: 4 gauge wire has more strands than 10 gauge wire.

AWG (American Wire Gauge) - A standard of the dimensional characteristics of wire used to conduct electrical current or signals. AWG is identical to the Brown and Sharpe (B & S) wire gauge.
4 gauge
Power Wire Length
This is the length of the power wire in feet.
17 feet
Ground Wire Length
The length of the ground wire in feet.
3 feet
Speaker Wire Included
If speaker wire is included, the value will be "Yes" and if no wire is included, it will read "No".
No
Remote Wire Length
This is the length of the remote wire that is included with the item.
17 feet
Interconnect (RCA) Signal Cables Included
Interconnect cables are required for amplifiers which are installed to the "RCA preamp low-level outputs" of a car stereo receiver. If your amplifier has high-level / speaker level inputs, then you do not need to purchase interconnects; however, interconnects offer a much higher quality sound when compared to speaker level inputs.
2 Channel
Fuse Holder
This is the type of fuse holder that is included in the item.
Mini ANL
Fuse Size
This is the size of the fuse that is compatible with the fuse holder. If the fuse needs to be replaced, be sure to replace it with the same size.
60A
Distribution Block Included
This means that the kit includes a distribution block in the package. This will assist in the installation of the amplifier kit or any situation where a distribution block is required.
No

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

This Big 3 Kit features HyperFlex cable and comes with everything you need to upgrade your factory power and ground wire.

Your Price $141.83

XS Power BIG3XS 1/0 Gauge Big 3 Upgrade Kit

The XS Power Big 3 Kit features 100% OFC XP Flex cable and includes everything you need to upgrade your factory power and ground wire.

Your Price $92.52

XS Power BIG3XP 1/0 Gauge Big 3 Upgrade Kit

The Big 3 Kit comes with everything you need to upgrade your factory power and ground wire.

Your Price $49.99

XS Power XP750 Special Edition

12-Volt Deep Cycle AGM Power Cell with 600 Max Amps

Your Price $72.99

Browse 2 questions and 3 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
After doing many hours of research, i found this to be the best deal for the money. Super glad that Sonic Electronix offers this package.
Joe M on Mar 11, 2016
Is the best deal that I could find on an amp and a wiring kit that will run my two 10's.
Kristie W on Dec 28, 2015
do the rca wires come with the wiring kit
and how long are they?
robbie d on Dec 13, 2015
Best Answer: As specified in the description: 16.40 ft. Gray 2-Channel RCA Audio Cables
Reply · Report · Rick MStaff on Dec 13, 2015
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

R500X1D_TC4KIT-42B

UPC

818060016660

Weight

7.95lbs

Internal SKU

r500x1d_tc4kit42b

Internal Product ID

106921

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Rockford Fosgate R500X1D with Power Wiring Kit and RCAs

  • Rockford Fosgate Prime Series Amplifiers
  • How To Install an Amplifier: Car Amplifier Basics Part 2