Free Kicker active-style headphones with a purchase of $100+ of Kicker gear
Why Choose Kicker Amplifiers:
Kicker Performance Audio has been around since 1980 and has been producing amazing products since then. Kicker’s drive to consistently produce products that not only are great but also push the standards of the car audio industry is very apparent in all series of their amplifiers. All Kicker amplifiers are CEA-206 Compliant, assuring you are receiving a continuous certified RMS power rating. Kicker will always exceed the rated power because Kicker is notorious for under rating their amplifiers. So really you will be getting more power than you actually pay for, which is not true for other lower end performance amplifiers that generally over rate their amplifiers. Kicker amplifiers will provide a choice of three automatic turn-on modes; remote, DC offset, or signal sense, which make then compatible with any car audio system. Along with their high-density convection heat sink for extreme heat dissipation and high efficiency MOSFET power supply, Kickers amplifiers are great way to go when selecting the perfect amplifier for your car audio system.
 |
- ZX Series Class D Monoblock Car Amplifier
- RMS Power Rating:
- 4 ohms: 1250 watts x 1 chan.
- 2 ohms: 2500 watts x 1 chan.
- MOSFET power supply
- Wired remote bass level control included
- LED power and protection indicators
- Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
- Balanced differential inputs make KICKER ZX Amplifiers compatible with any factory radios
- Eliminates unwanted noise in a system
- Boost, gain, and crossover frequencies are top-mounted for easy access, and a handy protection indicator featuring a new flashing yellow low-voltage light enhances the end panel
- Bridgeable operation
- Speaker-level inputs compatible (switchable) through RCA connection, Kicker 09ZISL required and sold separately
- Preamp RCA outputs
- Automatic turn on modes: remote, DC offset, or signal sense
- Thermal, voltage, and short circuit protection circuitry
- Variable low-pass filter (50-200 Hz, 24 dB/octave)
- Subsonic Filter (24 dB at 25 Hz)
- CEA-2006 compliant amplifier
- Frequency response: 25-200 Hz
- Dimensions: 27-1/2"L x 9-5/8"W x 2-1/8"H
- 1/0-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.
- Authorized Internet Dealer
- 2-year Manufacturer's warranty
Extend your Kicker warranty to 3 Years when you install your new Kicker amplifier with a compatible Kicker power kit! For a limited time, you can register your Kicker amplifier and power kit to qualify for an additional year of coverage. This offer is only available through official Kicker dealers and will only last for a limited time. With this amplifier, the following power kits will qualify for the extended warranty program: Kicker 09PKD1.
Product History: |  |
| (newest, current model) | |  |
| (previous model, replaced by Kicker ZX2500.1 (11ZX2500.1)) | |  |
| (previous model, replaced by Kicker ZX2500.1 (10ZX2500.1)) | |  |
| (previous model, replaced by Kicker ZX2500.1 (08ZX2500.1)) | |  |
| (previous model, replaced by Kicker ZX2500.1) |
|
Sonic Electronix, Inc. can only ship Kicker products within the United States of America.
|
Average Customer Rating is 4.7 out of 5 stars:
Share your thoughts with others:
|
|
Average Attributes Rating:
| Durability | | 4.7 |
| Value | | 4.7 |
| Features | | 4.5 |
| Design | | 4.5 |
| Usability | | 4.8 |
| what's this? |
|
|
Most Helpful Customer Reviews:
|
Review by
Josh from Mississauga, ON, Canada
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Well, after much debate and research I opted to go with this amp over a variety of others. VERY glad I did. Amp birth sheet read 2608 watts @ 2 ohms. LOTS of power from this thing and pretty efficient too. Runs cold @ 4 ohms and on a stock electrical my voltage never reads below 13.0v. under heavy load. Definitely worth every single penny.
I have it drawing signal through the Kicker line-out converter tapping signal from my factory subs in the rear deck. This amp actually has a setting where you select which input you are using so there is no need to run a remote wire if going the route I did.
|
|
Review by
Jeff from belle chasse, LA
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I recommend this amp because it is ridiculously loud I got 2 15" L7 kickers wired at 2 ohms and I had to put lock tight on the nuts and bolts of my spoiler cause it almost fell off.
|
|
Review by
Rajan from Jacksonville, FL
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
ummm i never did like Kicker... until now...
well they always say something is 500 watts but when u use it.. its really only... 200 or 250 max if u lucky.. well this amp says 2500 and guess what! this the 1st amp from kicker thats rated at true Rms... def a good buy... bst amp for SPL and for the price u payin sonic... its well worth it to..
|
|
Review by
thy chaife from third rock, sol system
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
This is a no bs amp people, its stupid loud, clean, and stable. Twenty years buildin bass machines, this amp is top quality. Thx Sonic
|
|
Review by
tito from florida
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I was running two kicker L7 15 with the amp and it sounded good but know I have two orion hcca 15 am about to get another amp for it.
|
Customer Service
