Expert Service 1-877-289-7664 [Hours]

Orion Cobalt CO652

6-1/2" 2-way Cobalt Series Component Speakers System

Discontinued
|

We apologize

This item has been discontinued

Bundled Savings with this Product

=

Get 25% off Sound Dampening Speaker Kit with Purchase!

For a limited time, get 25% off of the NVX SDSK2 Speaker Kit with a qualifying pair of speakers! Sound dampening will eliminate rattles, insulate against heat, and also improve the sound and output of your speakers!

3.75

11871

100

Orion Cobalt CO652

$49.99

+

25% OFF

NVX SDSK2

$14.99

Special Price $11.24 ($14.99 if purchased separately)

NVX SDSK2

• Eliminates Road Noise
• Quiets Vibrations
• Stops Annoying Rattles
• Increases SPL
• Reduces Heat
• Simple To Install
• Peel and Stick Installation
• Two 10" x 10" Pieces

(Offer 1 of 1)

Combined Total Price

$61.23

You Save $3.75

  • 6-1/2" Cobalt Series Component System
  • Power Handling:
    • Peak: 120 watts
    • RMS: 50 watts
  • 1" voice coil midrange driver
  • Built-in tweeter protection circuit
  • Progressive suspension
  • 4 ohms impedance
  • Top-mount depth: 2.36"
  • 1-year SonicElectronix.com warranty

Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks.

Speaker Specifications

Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6-1/2"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way Component System
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
120 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
50 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
85 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
60 - 20000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2.36"

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
17%
4 Star
50%
3 Star
17%
2 Star
0%
1 Star
17%

Average Attribution Rating

Durability
3.7
Value
4.5
Features
2.8
Design
3.7
Usability
3.7

Francisco

Miami, FL

Overall
Durability
Value
Features
Design
Usability

Good

June 18, 2012

This product is good but is not excellent. I have a problem with the crossover.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Tweeter

Benton Harbor, MI

Overall
Durability
Value
Features
Design
Usability

Installed them in a co-worker's Dodge Dakota

June 3, 2012

I chose these to keep within my co-worker's price range. I know that Orion did a great job on their HCCA subs so I thought I'd look into their component and coaxial sets. The specs and reviews made me go for it. I knew anything would be better than her worn out stock set-up. I installed them with no trouble. The tweeters fit almost perfectly in the stock door tweeter holes. The matching rear coaxial set wasn't a difficult install either. I was pleasantly surprised with the overall sound quality and performance. If you want to stay in a lower price range, these may be perfect for you. My co-worker is very pleased.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Tweeter

Benton Harbor, MI

Overall
Durability
Value
Features
Design
Usability

You get what you pay for

December 16, 2011

I put these in the front doors of my co-worker's 01' Dakota. She loves them. I on the other hand didn't like the install features. The mounting cups are on the ugly side, there's no way to mount the cross-overs (lack of screw holes or double sided tape), they do come with a pair of zip-ties, which broke so I had to use my own. The tweeter cups come with a metal ring with teeth to bite into the tweeter cup behind the mounting surface but I had to pound them flat for the teeth to be able to reach the tweeter cups. Apart from these problems the speakers are priced well and get the job done. The overall quality is hard to even consider as entry level but for the price you can't complain.

0 of 0 found this helpful

Help our customers find the most helpful reviews

matthew

san leandro, CA

Overall
Durability
Value
Features
Design
Usability

Not bad at all

November 12, 2011

After i blew the stock bose speakers in my yukon, I needed to buy some new componets for cheap. I ended up with these since the price was right. I was pretty impressed with them for the price that i paid. I was putting about 110rms to each ( ran the same coax's in the rear), and they handled them nicely. I sold them to a friend and hes running them for about 2 years now on a JL 600/4 and they still sound good. Hes actually thinking about ordering another set for the front doors. Overall good product.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Robert

saginaw, mi

Overall
Durability
Value
Features
Design
Usability

cobalt 6 1/2

February 25, 2010

sounds good, highs are a little off, but other than that sound is great

0 of 0 found this helpful

Help our customers find the most helpful reviews

Brauhmaudio

Gardena, CA

Overall
Durability
Value
Features
Design
Usability

Fit an 04 chevy impala

November 20, 2009

I put these in the front doors of an 04 impala. Woofer fit perfectly into door location. Tweeter location wasn't optimal so i placed new tweeter higher up in door panel using surface mount parts. Doesn't look professional surface mounted. Sticks out a bit. They sound good however. Crossover system seems to be 12dbs highpass 6db Low pass when i opened it. That's batter than blaupunkt and pb6c crossover

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

Streetwires 50 ft. of True Spec 16 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $29.99

Belva 23 ft. of True Spec 16 Gauge Speaker Wire

100% Copper Clad Aluminum, PVC blended jacket for easy installation and high strand count for maximum audio quality

Your Price $12.99

16-14 AWG Blue T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $4.49

16-14 AWG Quick Disconnect Connectors

These blue quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $7.99

NVX SDSK2 Speaker Kit

Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!

Your Price $14.99

Dynamat Xtreme Speaker Kit 10415

Enough sound dampening for 2 speakers!

Your Price $17.95

Stinger Roadkill Speaker Kit

Use this to eliminate rattle from your speakers!

Your Price $13.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $6.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

Xscorpion WDCR2 Window and Door Clip Remover

Removes and installs handle and window crank clips.

Your Price $6.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $21.99

NVX SDRLR1 Sound Dampening Rubber Roller

Install your Sound Dampening with ease! This heavy duty rubber roller is designed specifically to install your NVX products!

Your Price $7.99

Speaker Baffles for your Speakers

Enhance the sound of your speakers with these easy to install speaker baffles.

Your Price $9.99

XTC 6-1/2" Round Large Frame, Shallow Foam Speaker Baffles

Creates a tight seal behind speaker for enhanced audio quality.

Your Price $12.99

Product Summary

Manufacturer

Model Number

CO652

UPC

093207061165

Weight

6.00lbs

Internal SKU

co652

Internal Product ID

11871

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Orion Cobalt CO652