Expert Service 1-877-289-7664 [Hours]

Infinity Kappa 462.9cfp

4" x 6" 2-way Kappa Series Plate Speakers

Available. Ships at Later Date
|

List price $169.95

You Save: $89.96 (52.93%)

$79.99

with warranty A Pair

+ FREE Shipping in US 48

Add an Extended Warranty

SquareTrade Product Warranty
Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Will this fit my ride?

Check Vehicle

Available

Get FAST answers from customers ASK a Question See questions answers

Bundled Savings with this Product

=

Get 25% off Sound Dampening Speaker Kit with Purchase!

For a limited time, get 25% off of the NVX SDSK2 Speaker Kit with a qualifying pair of speakers! Sound dampening will eliminate rattles, insulate against heat, and also improve the sound and output of your speakers!

3.75

13966

100

Infinity Kappa 462.9cfp

$79.99

+

25% OFF

NVX SDSK2

$14.99

Special Price $11.24 ($14.99 if purchased separately)

NVX SDSK2

• Eliminates Road Noise
• Quiets Vibrations
• Stops Annoying Rattles
• Increases SPL
• Reduces Heat
• Simple To Install
• Peel and Stick Installation
• Two 10" x 10" Pieces

(Offer 1 of 1)

Combined Total Price

$91.23

You Save $3.75

Kappa: The Essence of Infinity

This Infinity Kappa 682.9cf is the essence and trademark of Infinity car audio. With all the high-end engineering and technology that goes into each Kappa speaker, you will sure that you are receiving only the highest quality components. Made with a woven glass fiber woofer cone, which contributes to low cone flex, low distortion, and enhanced acoustic clarity. Due to the increased power handling of the Kappa series, the Kappa 682.9cf feature edge-driven MMD dome tweeters that allow for a seamless sonic integration between the tweeter and the mid-woofer. Using the latest in loudspeaker engineering, each of the crossovers has computer optimized voice-matched outboard passive crossovers for flawless performance.

Unipivot: Staging Made Easy

The Infinity 682.9cf features a patented Unipivot tweeter design that ensures proper imaging when the speakers are installed. With the tweeter capable of being moved, it is positional and rotational even after the final screw secures the speaker in the door. Since most speakers are installed low in the door, the Unipivot design brings the soundstage up to the listener for more accurate and enjoyable experience. Each of the Kappa coaxial speakers, such as the Infinity Kappa 682.9cf feature adjustable tweeter level control. This switch will adjust the tweeters output by 3 dB. That simple tuning can make all the difference in your system and it ensures that your Kappa speakers will deliver exactly the sound that you are looking for.

True Four Ohm Technology

The engineers at Infinity have developed a speaker that works for all applications. The True Four Ohm Technology used in these speakers make it perfect for running directly of a headunit or with an aftermarket headunit and amplifier. All of the speakers in the Infinity Reference line feature a 2 ohm voice coil. However, when you factor in the small OEM speaker wire of most vehicles and the heating in the voice coil during use, the impedance actually seen by the amplifier will increase. Infinity has adjusted the speaker to be safely connected to any headunit.


The Sound of quality

Sonic Electronix, one of the leaders in car audio, recently visited Harman, the premium global audio and infotainment group, at their research and development locations in Northridge, California and Detroit, Michigan. The purpose of these visits was to utilize and combine the powerful brand of Harman and the industry leading knowledge behind Sonic Electronix to begin working together on developing future car audio projects.


General Features:

  • 4" x 6" Kappa Series 2-Way Plate Speakers
  • Power Handling:
    • Peak: 360 watts per pair / 180 watts each
    • RMS: 120 watts per pair / 60 watts each
  • Woven glass fiber cone woofer
  • Rubber surround
  • Edge driven MMD dome tweeter
  • Tweeter level adjustment on tweeter: Just rotate the tweeter to add 3dB to your highs!
  • Direct connect computer-optimized, voice-matched outboard passive crossover for superb detail and accuracy
  • 2 ohms impedance
  • Top-mount depth: 1-7/8"
  • Authorized Internet Dealer
  • 1 year Manufacturer's warranty

Priced Per Pair

Product History:

Infinity 462.11cfp thumbnail
(newest, current model)
Infinity 462.9cfp thumbnail
(previous model, replaced by Infinity Kappa 462.11cfp)

Speaker Specifications

Series
This is the manufacturer product line of speakers.
Kappa (Infinity)
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Pair
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
4" x 6"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way Plate
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

MMD (Metal Matrix Diaphragm)
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Woven Glass Fiber
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
180 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
60 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
94 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
75 - 25000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

Yes
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
1-7/8"
Bottom-Mount Depth
The depth when installed from the bottom of the mounting surface. Measured from the bottom of the speaker's magnet to the top of the mounting holes on the rim of the speaker.
2-5/16"
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
5-1/4" x 3-3/4" 
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
No

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
81%
4 Star
17%
3 Star
2%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.6
Value
4.6
Features
4.6
Design
4.8
Usability
4.7
Chris

Alva, FL

Overall
Durability
Value
Features
Design
Usability
Good sound

December 5, 2012

Product worked perfectly as described and install easy. Well worth the money. Kappa Series speakers are the best infinity speakers I have heard.

7 of 8 found this helpful

Was this review helpful to you?

Eston

Grand Canyon, AZ

Overall
Durability
Value
Features
Design
Usability
Crisp, but lack lows

September 27, 2011

I used these to replace factory 4 inch rounds for rear speaker pods. they sound nice for radio, and mellow songs. However, they get overworked and bottom out while listening to pop, hip hop, and country with a lot of deep notes. Would propbably be very nice if paired with larger speakers for the lows.

5 of 7 found this helpful

Was this review helpful to you?

swamp ninja

Saint Gabriel, LA

Overall
Durability
Value
Features
Design
Usability
loud little suckers!

September 30, 2013

Not much low end but the mids are good and the highs are downright insane! and that's running off a 22W rms excelon head unit. Just set you high pass to 100hz and you're good to go if you have subs. Without subs they still sound great they just bottom out fast at high volume. I love the clarity and I will be getting two more soon!

8 of 14 found this helpful

Was this review helpful to you?

Squish

Spring Texas

Overall
Durability
Value
Features
Design
Usability
Great product

December 9, 2012

These speakers sound awesome with the theater on the side made a huge diffrence in the sound of my truck very good price and would buy again

3 of 4 found this helpful

Was this review helpful to you?

robert

Enid, ok

Overall
Durability
Value
Features
Design
Usability
infinity kappa 462.9

January 9, 2015

I purched these for a 06' chevy silverado crew cab .this is my second set I have purchased .I love the sound of infinity .great highs even for the size of speaker .haven't installed them yet . But hopefully soon .well post more later .no cons you cant go wrong a setof these

7 of 13 found this helpful

Was this review helpful to you?

Mattwrotethis

Central Texas

Overall
Durability
Value
Features
Design
Usability
Good things in a small package.

July 8, 2014

These were recommended to me by a friend and fellow audiophile for my GMC pickup.

The highs are so crisp, clear, and bright that I'm beyond words to accurately describe them. The amount of bass put out by the woofers on them is actually significant (and surprising for their size!) They fit perfectly in the factory holes in my truck (though I did have to drill new holes, and had to mount one speaker upside down to clear the structure of the cab).

2 of 3 found this helpful

Was this review helpful to you?

ben

rialto, CA

Overall
Durability
Value
Features
Design
Usability
Best speakers ever

April 25, 2014

These speakers are great sound is clear loud everything I was looking for from infinity and great buy for your buck it's well worth it

2 of 3 found this helpful

Was this review helpful to you?

Rick

Sammamish, Wa.

Overall
Durability
Value
Features
Design
Usability
lovely speakers

January 27, 2014

Great sound out of such a small package. And great service from Sonic Electronic on the purchase!!

2 of 3 found this helpful

Was this review helpful to you?

Sarge

Buffalo, ny

Overall
Durability
Value
Features
Design
Usability
Great sound

September 5, 2013

These 4x6 plates from infinity just sound great. They can handle some decent power. The clarity is so crisp and clear.

3 of 5 found this helpful

Was this review helpful to you?

MOTORHEAD

SLAUGHTER, LA

Overall
Durability
Value
Features
Design
Usability
CLEAN CRISP SOUND

November 27, 2012

Great sounding factory replacement speakers! Not quite as loud as I like but definatly CLEAN sound. With a small amp they would rock out!!

1 of 1 found this helpful

Was this review helpful to you?

lildiggler

buffalo ny

Overall
Durability
Value
Features
Design
Usability
good value

July 19, 2014

great sound quality as expected from infinity very sharp highs and good mid range.

1 of 2 found this helpful

Was this review helpful to you?

Jesus

Mexico

Overall
Durability
Value
Features
Design
Usability
Excellent Sound Quality

September 18, 2013

This has very good sound quality and the overall fabrication is very good but one of them came with a short in the terminals that I have to fix before the installation, after that everything worked fine. i love them, they sound better that my 6.5 component from focal.

2 of 4 found this helpful

Was this review helpful to you?

Salmon

OR

Overall
Durability
Value
Features
Design
Usability
Great 4x6's

December 11, 2012

These things are amazing. Very clean sound and no regrets. Have em in a S10 (2003) and they fit perfectly.

1 of 2 found this helpful

Was this review helpful to you?

Squish

Spring Texas

Overall
Durability
Value
Features
Design
Usability
Great product

December 9, 2012

These speakers sound awesome with the theater on the side made a huge diffrence in the sound of my truck very good price and would buy again

2 of 4 found this helpful

Was this review helpful to you?

Chris

Alva, FL

Overall
Durability
Value
Features
Design
Usability
Great product

December 3, 2012

Infinity Kappa's are a great sounding high. They don't produce base, but what do you expect from a 4" speaker. The separate crossover is excellent at directing traffic for the speaker.

1 of 2 found this helpful

Was this review helpful to you?

MikeMoneyBags

West Palm Beach, FL

Overall
Durability
Value
Features
Design
Usability
Great speakers!

May 8, 2012

I brought these speakers hearing they were good quality speakers and so far they were right. I have them hooked up to my 4 channel alpine and it doesn't distorts nothing just very loud for my ears. Great speakers and no regreting them. The sub is not in the middle so make u got some room or make some room for it.

1 of 2 found this helpful

Was this review helpful to you?

Robert

Carlsbad, CA

Overall
Durability
Value
Features
Design
Usability
Best 4x6 Option

April 3, 2012

Running these simply off my Kenwood KIV-701 headunit and they are clean and crisp sound, not much bass goes through these so my 12" sub really made it complete. Sonic has the best pricing and would highly recommend these speakers for the price as well as the rest of their low priced products.

1 of 2 found this helpful

Was this review helpful to you?

CHARLES

Las Vegas, NV

Overall
Durability
Value
Features
Design
Usability
INFINITY THE BEST

October 6, 2011

I always like infinity speaker, 2yraers ago my truck got stolein,they took everything. Started shopping around and found sonic eletronix online. God bless me in this direction now i get all my stuff from them these speaker are on hit, great value at great price.
Thanks sonic!

1 of 2 found this helpful

Was this review helpful to you?

Devin

Harriman, TN

Overall
Durability
Value
Features
Design
Usability
Great Product

July 25, 2011

These are by far the best 4x6 speakers out there. I've heard a lot of them and these are far superior. They also have a great look to them. And they are VERY loud and clear when pushed by a Kenwood 65RMS per channel amp. Would definitely buy again.

3 of 6 found this helpful

Was this review helpful to you?

CJ

South Florida

Overall
Durability
Value
Features
Design
Usability
BEST option for 4x6

January 3, 2011

These speakers are simply awesome. I ordered them from Sonic Electronix about two weeks ago, along with a set of matching Infinity Kappa 62.9i coaxials. I had both sets installed today in my Sierra reg cab, along with a Kenwood Excelon KDC-X794. These speakers are very, very, very clear and loud for 4x6 plate speakers. Highs are crisp, not harsh. I would definitely recommend them to anybody & everybody who has a vehicle with the dreaded 4x6 speakers from the factory. These speakers will bring your music to life!

2 of 4 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $44.95

Belva 23 ft. of True Spec 12 Gauge Speaker Wire

100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

Your Price $9.99

NVX SDSK2 Speaker Kit

Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!

Your Price $14.99

Dynamat Xtreme Speaker Kit 10415

Enough sound dampening for 2 speakers!

Your Price $17.95

Stinger Roadkill Speaker Kit

Use this to eliminate rattle from your speakers!

Your Price $13.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $14.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $6.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

Xscorpion WDCR2 Window and Door Clip Remover

Removes and installs handle and window crank clips.

Your Price $6.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $21.99

NVX SDRLR1 Sound Dampening Rubber Roller

Install your Sound Dampening with ease! This heavy duty rubber roller is designed specifically to install your NVX products!

Your Price $7.99

XTC 4" x 6" Foam Speaker Baffles

Compresses and forms to the shape of most installations.

Your Price $10.99

Items we think you might want
P6462 thumbnail
JBL P6462

• Peak Power: 150W
• RMS Power: 50W
• Plus One HCL Woofer cone
• Textile dome tweeters
• voice-matched passive crossover
• 2 ohms impedance
• Oversized voice coils and integrated tinsel leads

Your Price $79.99

11KS46 thumbnail
Kicker 11KS46

• Peak Power: 60W
• RMS Power: 30W
• Injection Molded Polypropylene Cone Woofer
• Santoprene Surround
• 1/2" PEN Tweeter
• Neodymium Magnet with Ferrofluid
• 4 Ohms Impedance

Your Price $79.95

Browse 2 questions and 11 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
Excellent Sound!
Joel I on Jan 23, 2015
their Infinty, what else is there to say.
Donnie F on Sep 2, 2014
I have a set in my truck they sound great.
Timothy S on Sep 18, 2014
Will these speakers need any additional mounting hardware, or will they mount as the original equipment did?
brian z on Dec 31, 2014
Best Answer: The mounting pattern is a standard one so you should be fine. They come with new hardware if the original doesn't work but there is always a possibility that your car will need a little modification. It all depends on what you want to put them in. I installed these in the back of an 82 volkswagen rabbit which took a little effort to mount them correctly.
Reply · Report · michael m on Dec 31, 2014
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

462.9cfp

UPC

050667110109

Weight

4.00lbs

Internal SKU

4629cfp

Internal Product ID

13966

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Infinity Kappa 462.9cfp

  • Infinity Kappa Series Speakers
  • Harman International: The Pursuit of Great Sound
  • Sonic Electronix: The X Factor when Shopping Electronics