Expert Service 1-877-289-7664 [Hours]

Shipping Promo

MTX Audio TP1200

Thunder Pro 2 Series Single 12" 2-way Professional Loudspeaker/PA System with 19mm tweeter and 13" x 6" Horn

Discontinued
|

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

MTX Audio TP1200

MTX TP Speakers are designed to perform well for a variety of different applications, including low to mid level live sound reproduction, public address, karaoke, and mobile entertainment. The long excursion woofer and horn-loaded tweeter with high frequency protection circuity make the TP speaker perfect for vocals or music!

Product Features

  • Single 12" Two Way Professional Loudspeaker/ PA System with 19mm tweeter and 13" x 6" Horn
  • Power Handling:
    • Peak: 300 watts
    • RMS: 150 watts
  • X-Radial horn
  • Ferrofluid cooled tweeter
  • PTC Tweeter protection circuity
  • Low frequency Port
  • Frequency Response: 39-20,000 Hz
  • 8 ohms impedance
  • Along with the positive and negative terminal posts, the terminal also feature a 1/4" phone jack to connect the speakers.
  • Dimensions: 10-1/4"L x 13-3/4"W x 21"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Priced Per Speaker

General Features

Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

Built-In Equalizer
The number of graphic or parametric equalizer bands the stereo receiver is equipped with. The more EQ options, the more you will be able to adjust your music to your liking.
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
DVD Audio
The unit will playback audio files burned onto a DVD disc.
MPEG-1 (VCD)
The unit will play Video Compact Discs (VCD). VCD are videos that are stored on regular compact discs (CD) and use a MPEG-1 compression.
CD
The unit will play CDs, also known as Compact Discs. This is the standard format for audio optical discs.
CD+G
Also known as CD+Graphics and often used for karaoke machines to present on-screen lyrics for the song on the disc.
MP3 Playback
This feature refers to whether or not the CD player will play discs encoded with MP3 files. To burn a MP3 encoded disc, use the "data" mode on your CD Recorder and finalize the session and/or CD.
Memory Card Reader
Whether or not the receiver has a built-in input for removable memory cards such as SD (Secure Digital) cards or MMC (Multimedia) cards.
Microphone Included
Some units that require a microphone come with one, while others do not. This designates whether the item includes a microphone.
Number of Microphones
Some Bluetooth headsets will use multiple microphones to more efficiently capture the users voice.
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
39 - 20,000 Hz
Height
The height of the item, measured from top to bottom, in inches.
21"
Width
The width of the item from left to right (side-to-side) measured in inches.
13-3/4"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
10-1/4"

Speaker Features

Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
12"
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
Peak Power Handling (Subwoofer)
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
RMS Power Handling (Subwoofer)
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Horn
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
8 ohms
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
91.4 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
39 - 20,000 Hz
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.

Promotions

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
50%
4 Star
50%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
4.5
Design
4.5
Usability
5.0
Ty

Somonauk, IL

Overall
Durability
Value
Features
Design
Usability
Great Speaker

January 5, 2010

I own a pair of these and the get loud and have excellent sound. Only problem I have with is worrying about the bass bottoming out which happens from time to time. The tweeter on the other hand is extremely loud and is very clear. Overall these are nice speakers.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Jack

York, Pa

Overall
Durability
Value
Features
Design
Usability
DJ/ Karaoke Useage

December 30, 2008

I strongly recommend these speakers. They have a great sound on their own but the use of a separate Sub makes these puppies sound incredible for the price.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

TP1200

UPC

715442631339

Weight

39.00lbs

Internal SKU

tp1200

Internal Product ID

14779

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: MTX Audio TP1200