Expert Service 1-877-289-7664 [Hours]

Boom. SUBTEMBER is here!

Magnum MB210SP by MTX Audio

Dual 10" Loaded Vented Subwoofer Enclosure with Amplifier

In Stock
|

List price $349.99

$179.95

with warranty

You Save: $170.04 (48.58%)

Arrives by Tuesday, Sept. 23 to zip 07095

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Tue, Sept. 23

Get FAST answers from customers ASK a Question See questions answers

Bundled Savings with this Product

=

Frequently Bought Together - Add Sound Dampening to order

Save 10% on an NVX trunk kit that contains 20 sq. ft. of quality sound dampening material. This material quiets vibrations, stops rattles, and increases the subwoofer SPL.

6.00

14931

507

Magnum MB210SP by MTX Audio

$179.95

+

10% OFF

NVX SDTK20

$59.99

Special Price $53.99 ($59.99 if purchased separately)

NVX SDTK20

• Eliminates Road Noise
• Quiets Vibrations
• Stops Rattles • Increases SPL
• Reduces Heat
• Simple To Install
• Easy To Form Aluminum
• Four Step Peel and Stick Installation
• Five 18" x 32" Pieces

(Offer 1 of 1)

Combined Total Price

$233.94

You Save $6.00

Authorized MTX Dealer
If you are looking for the perfect low cost way to put a subwoofer system in your vehicle, then look no further than the Magnum MB210SP by MTX Audio. With two 10" subwoofers installed and wired into the sturdy 5/8" MDF constructed enclosure, it can't get much better than this. Oh wait, it does. Magnum includes a 800W Magna Bass amplifier to power these woofers. This all-in-one package could be just what you are looking for.

Subwoofer Specifications:

  • Dual 10" Loaded Vented Magnum Subwoofer Enclosure
  • Power Handling for both subwoofers:
    • Peak: 800 watts
    • RMS: 400 watts
  • Impedance: 4 Ohm
  • Polymer coated pulp cone
  • Foam surround
  • Frequency response: 20-300 Hz
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty (subwoofer only)

Amplifier Specifications:

  • Magna Bass Single-Channel Class Mono Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 250 watts x 1 chan.
    • 2 ohms: 400 watts x 1 chan.
  • Max power output: 800 watts x 1 chan.
  • Variable Bass EQ (0-18 dB bass boost at 40 Hz)
  • Power and protection LED indicators
  • Thermal protection
  • Overload protection
  • Short protection
  • Preamp RCA outputs
  • Aluminum alloy heatsink
  • RCA level inputs
  • Screw terminals
  • Variable high-pass filter (50-250 Hz, 12 dB/octave)
  • Variable low-pass filter (50-250 Hz, 12 dB/octave)
  • Frequency response: 20-300 Hz
  • 10-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.

Enclosure Specifications:

  • Dual 10" Loaded Vented Magnum Subwoofer Enclosure
  • 5/8" MDF construction
  • Dimensions: 11-1/2"BD x 13"TD x 28"W x 13-1/8"H

Amplifier Power Specifications

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
250 watts x 1 channels
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
400 watts x 1 channels
RMS Power @ 1 ohm
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 1 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
Not Stable
Peak Power Output
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage. Often times this maximum is achieved during a brief musical burst, such as a drum accent or low bass hit. Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. This is the peak power output for the amplifier's 5th channel.
800 watts x 1 channels

Amplifier Specifications

Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

800 watts
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 250 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 250 Hz
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 18 dB

Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
200 watts
Total RMS Power Handling
This is the total RMS power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total RMS power handling for all of the subs combined.

The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend giving your subwoofer(s) 75% - 90% of the recommended RMS rating.
400 watts
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
800 watts
Total Peak Power Handling
This is the Total Peak Power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total peak power handling for all of the subs combined.

Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements.
1600 watts
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Foam
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polymer/Mica Composite
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 300 Hz
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Vented / Ported
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
2
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
Square/Rectangle
Height
The height of the item, measured from top to bottom, in inches.
13-1/8"
Width
The width of the item from left to right (side-to-side) measured in inches.
28"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
11-1/2"
Second Depth
The second depth is used only when the box is slanted or angled. This value is the top measurement and it is measured in inches.
13"
Wood Thickness
The thickness of the wood the enclosure is made of, measured in inches.
5/8"
Number of Terminals
The number of terminals the enclosure has. Each terminal represents 1 positive and 1 negative.
1
Terminal Type
Spring clip terminals work best with bare wire connections with small-gauge speaker wire, or pin-type connectors.

Binding post terminals are a sturdier, more versatile type of speaker terminal. Because binding post terminals are are threaded, you can tighten them down against the wire or connector for a tight, clean connection. The most popular style of binding post terminals is known as a "5-way binding post". This type can accept bare wire, or any of the common speaker wire connectors. Binding posts with the option to be used with banana clips are even more versatile

Spring posts are a hybrid of the two. Instead of using a thread and "screwing" them tight, they use a spring to allow the wire to fit and tighten against the terminal.

Binding posts
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Black
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
Carpet
Final Wired Impedance
This is the final impedance of the system as the amplifier will see it. If the final impedance is for two sets, it means that the enclosure has two sets of terminals at the listed impedance.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
63%
4 Star
23%
3 Star
12%
2 Star
0%
1 Star
2%

Average Attribution Rating

Durability
4.4
Value
4.7
Features
4.3
Design
4.7
Usability
4.7
Bassmaster

Florida

Overall
Durability
Value
Features
Design
Usability
Just Right

January 19, 2010

A very nice system if you want that bass that rocks the car but not the ppl next to at a stop light. Very straight forward as far as installation i would also recommend that you get the 4g wiring kit cause the wiring that comes with it sucks. Overall a very good product for the price.

6 of 6 found this helpful

Help our customers find the most helpful reviews

bleu842

warren mi

Overall
Durability
Value
Features
Design
Usability
Sounds good works good price is great!!

June 24, 2010

In an 07 focus hatchback, sounds good price was great!

4 of 4 found this helpful

Help our customers find the most helpful reviews

Dylan

Lewisville, TX

Overall
Durability
Value
Features
Design
Usability
These 10's hit HARD

July 18, 2009

These subs hit very hard! I own a firebird and they are perfect, they hit so hard that i cant even turn the bass up half way... sound great with any kind of music!! They sound just as good as my friends 3000 probox system in his truck... for about 1/20 of the price!! They are great for a 16 year old that is on a budget.. I highly HIGHLY recommend this package

4 of 4 found this helpful

Help our customers find the most helpful reviews

Al

Lockport, NY

Overall
Durability
Value
Features
Design
Usability
Great Deal.

June 8, 2009

These subs were amazingly easy to install. They fit perfectly in my small 2000 Saturn SL1. They hit hard and are very consistent. Some of my friends have even told me that this combo compares to their 12" JL Subs... Needless to say I have been very impressed by this very economical sub combo.

4 of 4 found this helpful

Help our customers find the most helpful reviews

Jonathan

frederick, MD

Overall
Durability
Value
Features
Design
Usability
Not Bad At All!

October 23, 2008

honestly... im satisfied! if you're not really worried about entering Bass competitions and you just wanna bump... then these are not a bad choice! i would just recommend that you get some good wires and RCA jacks. this combination of subs and amp are a good reliable source of bass... especially for a sedan (i have a 2003 civic EX 4dr)... and its soooooooo cheap!!!!! enjoy

4 of 4 found this helpful

Help our customers find the most helpful reviews

Chad

Louisiana

Overall
Durability
Value
Features
Design
Usability
Good Subs

March 31, 2010

Great starter subs, im the type of person, before i buy things i read all reviews. And if your looking for good starter subs for your first time, i would really get these subs, you wont be disappointed. these are great subs and hit really hard. May need to get a new amp to produce more bass. I'm currently upgrading to 2 12's. but these things hit harder than my friends 12's. GET THESE!

2 of 2 found this helpful

Help our customers find the most helpful reviews

top gun

dothan, AL

Overall
Durability
Value
Features
Design
Usability
good speakers

March 28, 2010

Ihe amp and speakers hit good great if you are just starting off, I have had them for over a year, planning to upgrade, -anyways bottom line is they are worth it, does make your rearview mirror shake, have had no problems other than when it is really hot outside the amp cuts off but comes back on after bout 5 mins

2 of 2 found this helpful

Help our customers find the most helpful reviews

Cutman

Japan

Overall
Durability
Value
Features
Design
Usability
Magnum MB210SP by MTX Audio (Awesome Sub)

May 21, 2009

Have had this for six months,awesome sub!! Has handled everything I've thrown at it with ease. Digs deep to boot!

2 of 2 found this helpful

Help our customers find the most helpful reviews

Nathan

dothan, al

Overall
Durability
Value
Features
Design
Usability
good performance

April 13, 2009

this is my first time getting subs and i am happy with them,from outside they are not that loud but when you sit inside and crank it up,they give you some serious good clean pounding bass,if you are just starting off and you on a budget,get these.For 2 10",they get the job done.

2 of 2 found this helpful

Help our customers find the most helpful reviews

Big Poppie

peoria,az

Overall
Durability
Value
Features
Design
Usability
Review

April 9, 2009

I was shocked of how the system performed.. They are good for the price. The only issue I have is the amp gets hot . This is a starter kit that I am moving to my daughters first car

2 of 2 found this helpful

Help our customers find the most helpful reviews

chad

Fredericksburg, VA

Overall
Durability
Value
Features
Design
Usability
Great Subs

October 20, 2008

These subs are great. They come with a good amp which supplies the perfect power. Minimal instructions so if your not good at installation your SOL. These sound amazing in My civic hatchback would recommend to anyone. Thanks to these my neighbors hate me:)

2 of 2 found this helpful

Help our customers find the most helpful reviews

Junior

Norfolk, VA

Overall
Durability
Value
Features
Design
Usability
MTX SUBS

August 14, 2014

These subs are awesome! They are great for people who are just diving into audio systems for their car. For only 180$ you can't go wrong. Hits hard and sounds great. Shipped very quickly!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Vocal Lover

Phoenix Area, AZ

Overall
Durability
Value
Features
Design
Usability
Sounds big, cost little

June 30, 2014

As others have mentioned, use different wire to hook it up. If you're going to mount the amp to the sub's box, use spacers to allow air to get under the amp to help cool it a little. Pounds well with no "whoosh" like round ported sub boxes. Can't beat the price, happy.

0 of 0 found this helpful

Help our customers find the most helpful reviews

John

Homestead, FL

Overall
Durability
Value
Features
Design
Usability
Great for the price range

June 2, 2014

These subs hit HARD. In a chevy cobalt coupe, everything moves when the bass hits. Only concern is with the amp, fried within 8 hours when received. Returned and waiting on the new one to be delivered. May be an isolated incident, but could also be bad workmanship on the part of MTX. Keep a spare amp on hand if you can just in case. Other than that, premium sound at a fraction of the price. Won't win competitions, but will definitely put a smile on your face when the music is playing.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Gabe

Brooklyn, NY

Overall
Durability
Value
Features
Design
Usability
UnExPeCtEd!!

April 8, 2014

Wow!!! defiantly a 4.5 rating. Upgraded from a 300 watt 10" single powered enclosure. Every song I listen to now has bass and does it kick.. I'm very satisfied for someone who has had 15's and 12's.. Nice crisp and clear bass. My ears are kind of ringing. I would highly recommend this package.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Bradford

East Berlin, PA

Overall
Durability
Value
Features
Design
Usability
Great package for the price

January 16, 2014

I am new to after market sub installations and i found trying to match a sub to a box to an amp a difficult task. I was always worried that i would buy the wrong amp for speakers or visa versa. This package seems to be nicely matched and the installation was a breeze. Sounds fantastic.

0 of 0 found this helpful

Help our customers find the most helpful reviews

David

Depew, NY

Overall
Durability
Value
Features
Design
Usability
Get rid of the box, or stuff it.

November 3, 2013

This is an entry level kit at best. The subs are the low end that MTX makes, the box does not have enough cubic footage to allow the low end subs to perform at their best. the amp is very low power. 800watts seems like a dream for this amp as the best that is can do is 400 and that seems to be peek. So lets go to the sound. After tuning the amp for about 1.5 hours with my iasca test cd, and getting rid of all distortion, the subs are able to produce 50hz 40 and 35hz, but below that seems to be the subs downfall. They just cant seem to hit those lows. But that is what you get for the low end subs. The sound from the stock magnum box has a little punch to it, but the deep lows that we all like can not be heard/felt. and the feeling is... well....... flat, no depth to the bass at all. On a hunch that the Box is the culprit I took 1 of the magnum subs out, and put it in to a atrend b-box sub box. I then used the amp included with the magnum kit and hook that up. this is a night and day difference. the sub actually can hit at this point, and the response is better. I was able to get 25hz out of them. The feeling is totally different. Not high end sound, but good enough that some heads may turn for the amount of bass that is put out. Since I now know that the box is the issue with these subs(Not the only issue but the main issue) I went ahead and added poly fil to the box in hopes that I can trick the sub in to thinking it is in a bigger box. After going to my local dollar store and buying a poly fiber pillow I proceeded to open said pillow up and extract the poly fiber. I then took my adhesive spray and added poly fiber to each box (To be honest there is MAYBE 1/2 a cubic foot of volume in the sub compartment, no where near enough room.) After adding poly fil to each sub box. I then when to testing again. Results show a lot of improvement. I had a cut off at about 25 to 27hz and we got that nice throaty feeling in the bass. The bass no longer feels flat, and is filling the cab of the jeep just fine now. I did have to re-tune the amp but the poly fill made it all worth it. The subs now at least sound decent. In the end if you are going to get this kit, either get bigger boxes. or some poly fill. The amp is mediocre, the subs are low end, the box is way too small. As far as looks, the subs look cheep, but the box looks very nice. The amp is also very nice looking but the included instructions of turning the gain all the way up will do nothing but cause damage. If you do buy this kit, you can install it yourself, but I would highly suggest to have a pro tune the amp after you have either poly filled the box, or got some decent boxes for the subs. After you get this going save your money and upgrade the amp, as this amp would be better for mids and highs. and then upgrade the subs.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Ivan

National city, CA

Overall
Durability
Value
Features
Design
Usability
These Things are Awesome

September 6, 2013

These are worth the money they really do bump just reccomend buying monster cable to wire to wire them up if you have the settings on the amp right people can definatly hear it

0 of 0 found this helpful

Help our customers find the most helpful reviews

Ivan

National city, CA

Overall
Durability
Value
Features
Design
Usability
thes things are awesome

September 1, 2013

These are worth the money. they really do bump just recommend buying monster cable to wire to wire them up. if you have the settings on the amp right people can definitely hear it.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Ivan

National city, CA

Overall
Durability
Value
Features
Design
Usability
thes things are awesome

August 31, 2013

These are worth the money they really do bump just recommend buying monster cable to wire to wire them up if you have the settings on the amp right people can definitely hear it.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Browse 1 question and 1 answer
Hide answersShow all answers | Sort by
how large are the speakers in length and in hight ?
A shopper on Aug 23, 2014
Best Answer: Here are the dimensions;
28-1/8"W x 12-15/16"H x 13-1/8"D1 x 9-3/4"D2
Reply · Report · Nelson G on Aug 24, 2014
· Add Answer · I Have This Question Too (2)

Product Summary

Manufacturer

Model Number

MB210SP

UPC

715442520282

Weight

48.00lbs

Internal SKU

mb210sp

Internal Product ID

14931

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Magnum MB210SP by MTX Audio