Positive and Negative Battery Terminal with Satin Nickel Finish, Two 1/0 or 4 AWG and 2 8 AWG Inputs
Product highlights
Positive and Negative Battery Terminal • Satin Nickel Finish • Two 1/0 AWG or 4 AWG Outputs • Two 8 AWG Outputs • New stylish design • vibration resistant • High current capacity • Durable tinted acrylic cover
Learn more about the tsbtpn
Best selling similar products
• Positive or Negative Battery Terminal Clamp
• Connects to the positive or negative battery terminal
• Splits the connection to 4 outputs
• Two 1/0 or 4 Gauge and two 8 Gauge outputs
(33)
$14.99
List price $24.99
• For positive or negative battery post use
• Add a Post System
• >Solid brass construction
(7)
$38.99
List price $47.99
JL Audio XB-BTU Battery Terminal
• Works with power wire 8 gauge to 1/0 gauge
• Great for positive or negative connections to your battery
• Forged and machined 360 brass connection
• Elements and set screws have marine-grade, anti-corrosive Stannum plating
(11)
$69.99
List price $69.99
JL Audio XD-BTS Battery Terminal
• Ultra-Compact Battery Connector, Positive or Negative
• 10 - 4 Gauge
• High-Temperature Polycarbonate Cover
• Marine-Grade Stannum Plating
(8)
$44.99
List price $44.99
• Master Ground Lug accepts multiple ground wires
• Stainless Steel lug with plated brass contact
• Aggressive star washers provide secure connection
(12)
$14.99
List price $14.99
• Positive Battery Terminal
• Shoc-Krome-plated Output
• Impact resistant covers
• One 4 Gauge Output
• One 1/0 Gauge Output
• Two 8 Gauge Outputs
(4)
$34.99
List price $89.00
• Multi GM Battery Terminal
• One 1/0 Gauge, One 4 Gauge and Two 8 Gauge Outputs
• For Use with GM Side Posts or Stinger Batteries
• High Power Connection
• Works on Both Positive and Negative Terminals
(4)
$34.99
List price $69.00
• Positive or Negative Battery Terminal Clamp
• Connects to the positive or negative battery terminal
• Splits the connection to 3 outputs
• One 1/0 or 4 Gauge and two 4 or 8 Gauge outputs
(19)
$14.99
List price $24.99
• HPM Series Battery Terminal with Two 1/0 or 4ga Outputs
• (2) 1/0 Gauge or (2) 4 Gauge outputs
• Ultimate power protection
• Multiple output design
• Corrosion resistant satin chrome finish
(9)
$32.99
List price $59.00
• HPP plating for superior corrosion resistance
•Custom tooled solid brass
• Allows additional power or ground connections
• Contains One (1) Terminal Bolt
(2)
$9.99
List price $9.99
Manufacturer:
Model Number:
TSBT-PN
Weight:
0.75lbs
Internal SKU:
tsbtpn
Internal Product ID:
20636
| 5 star |
|
86% |
| 4 star |
|
14% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Tsunami TSBT-PN
This is a great product for the big three upgrade. I had no problems connecting the 0-guage and some stock wires to these terminals. The only down side are the plastic covers, they come off real easy. But they look better with out them. I recommend these terminals for any audio power upgrade.
16 found this helpful
Makes wiring too easy
xs d3100 battery located in the trunk couldn't of been easier to install with these. Quality built and ditches any thoughts of getting a distribution block.
15 found this helpful
great price
Great price for something that everyone else is charging an arm and a leg for. Works great, and you get great options with two 1/0 AWG or 4 AWG outputs, and two 8 AWG outputs. Ive had them for over 6 months now and had no issues at all with them.
16 found this helpful
Great product
Works like a champ and made my sub installs simple. Would purchase again.
17 found this helpful
First ones stripped, ordered more.
These are some nice blocks, and the only ones I could find with 2-1/0g and 2-8g's. The fit snug on the Yellow Top 34/78's. I tightened the positive block with a bit of force, and stripped out the internal threads, trying to ensure the best connection possible as I'm running 5500+ watts RMS off of two BRE2500.1d's. I would use caution when tightening these terminals, so the same thing doesn't happen to you. Zero gauge fits tight in these terminals, but with a bit of twisting, you can manage to get all of the wire in. Overall, a great buy if your planning on using the top posts for your BIG3, but if your batt has bolt down side posts, I recommend using those instead.
15 found this helpful
Best Value
These are some solid terminals, very well built. They could easily be sold for twice the price and still be considered a good deal. They have a brushed nickel plating, so you don't have to worry about the finish coming off and getting distorted like the gold ones, which have a very thin plating and have to be replaced after a year or so. Also important is the thread quality, you don't have to worry about these stripping out like other similarly priced terminals. Definately the way to go if you want to do the Big 3 AND run a zero gauge to the back!
15 found this helpful
Amazing product
They installed less than 5 mins. Great for the big 3 upgrade. Installed on a 05 ram. Lights do not flicker any more.
14 found this helpful
Oh my wow
Great glad I ordered these before they went out of stock, on my Kinetik 1800 jeez they are worth twice the price, SonicElectronix rules!!! These are great for the big three upgrade, if ur a real basshead :p, buybuybuy!
14 found this helpful
do exactly what they are supposed to!
feel very sturdy, screws tightened up with out fear of stripping them, and fit the posts perfectly.
15 found this helpful
Perfect!!
I did the Big 3 upgrade with these and I could not be happier with the results. These are some heavy duty terminals; the best for the this price.
14 found this helpful
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
