Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale!

Boss BX35

3-way Electronic Crossover

In Stock. Only 3 Left!
|

List price $99.99

$42.99

with warranty

You Save: $57.00 (57.01%)

Arrives by Monday, Aug. 4 to zip 98144

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock. Only 3 Left!

Arrives by Mon, Aug. 4

  • 3-way electronic crossover
  • Front, rear, and subwoofer inputs
  • Front, rear, and subwoofer outputs
  • Variable 0 - 18 dB bass boost
  • Variable high passs crossover for front and rear channels
    • Front: 50Hz - 5kHz
    • Rear:45Hz -1.6kHz
  • Subwoofer input mode selector: direct or mixed
  • Variable bass boost frequency control
  • Front crossover frequency multiplier (x1 or x10)
  • Variable Subwoofer Phase Shift Control (0-180)
  • Chrome RCA input and output connectors
  • LED Power Indicator
  • Signal-to-Noise Ratio: 95dB
  • THD: <0.01%
  • Maximum Input Level: 4.5V RMS
  • Maximum Output Level: 9V RMS
  • Dimensions (W x H x L): 8-3/4" x 1-1/2" x 6-1/2"
  • 1-year Manufacturer's warranty

Crossover Specifications

Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

High-pass (HP)
Built-in Bass Reconstruction
Bass reconstructors, or bass enhancers, improve low frequency reproduction in a car audio system with at least one subwoofer. These bass expander products will help your subs produce accurate bass thumps.
No
Max Output Level
The maximum level (in volts) of signal output. A higher level will increase the clarity and boost your signal.
9 volts
THD (Total Harmonic Distortion)
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
0.01%
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
95 dB
Width
The width of the item from left to right (side-to-side) measured in inches.
8-3/4"
Height
The height of the item, measured from top to bottom, in inches.
1-1/2"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
6-1/2"

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
56%
4 Star
33%
3 Star
0%
2 Star
11%
1 Star
0%

Average Attribution Rating

Durability
4.7
Value
4.9
Features
4.4
Design
3.9
Usability
4.6

chris

wesley chapel , FL

Overall
Durability
Value
Features
Design
Usability

mooner

July 8, 2014

this product I purchased 30 days ago , it works flawlessly couldn't be happier

0 of 0 found this helpful

Help our customers find the most helpful reviews

Tim

Tucson, AZ

Overall
Durability
Value
Features
Design
Usability

It's not the best or worse.

February 26, 2012

I've had this crossover for three years now and I have moved it from one car to another and at one point in time I had it under the seat, so it's beat up a little. I bought because I didn't have a bass knob for my amp, so this was the easy fix. Most would say you don't need a crossover, it's true you don't need one if you have a newer amp. I myself ran MTX crossover, but MTX don't make them any more. I saw some one wrote that it didn't make difference, well if you don't have a good setup and I mean HU, speakers, ect, it will not sound good. All most every one has bought the cheap stuff and found out it wasn't that good. I myself found this out over the years so now I have the better car audio in my car. It's not pro, but it's not junk. I will change this crossover for a different one down the road. I haven't changed it because I would have to rip out a lot to get it out. It's a good starter. Pros: Durability, works. When you amp the inside speaks you set the hrzts to make it sound good when or don't want a Component set up. Cons: Bright LED light so at night it blinds you, The response could be better when if comes to sound of the bass for the subwoofers.

0 of 0 found this helpful

Help our customers find the most helpful reviews

jessy

apache junction, AZ

Overall
Durability
Value
Features
Design
Usability

Greta deal fast shipping ,thanks sonic e

June 19, 2011

Great product,it dose what its supose to do

0 of 0 found this helpful

Help our customers find the most helpful reviews

Keaton

Longview, TX

Overall
Durability
Value
Features
Design
Usability

Boss BX35

December 14, 2010

get it you wont regret it

0 of 0 found this helpful

Help our customers find the most helpful reviews

sound maniac

Jamaica

Overall
Durability
Value
Features
Design
Usability

sucks

October 11, 2010

this crossover sucks i had it with my clarion eqs746 and it made my highs and mids sound off i had a hard time tuning my sound with this unit i wouldnt recommend this unit to anyone who likes clean clear music that isnt over bearing and hard to find that sweet spot in music where everything is balanced and clear....the best crossover to go with is the clarion mcd 360 it worked wonders for my system and in home setup great highs mids and bass wow!!!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

rakim97

Guadeloupe

Overall
Durability
Value
Features
Design
Usability

content

January 18, 2010

product a very great quality for low-costs, precise adjustment. once installed with my 2 amplifier, the sound is clearly clean and precis after grinding has bottom it remains stable and does not vary. a product of quality for begun allowing broad adjustment protecting the high speakers and quality listens

0 of 0 found this helpful

Help our customers find the most helpful reviews

Nikol

Miami, FL

Overall
Durability
Value
Features
Design
Usability

good product

June 20, 2009

this product really works especially on the highs and mids. i don't really like them on my bass amp

0 of 0 found this helpful

Help our customers find the most helpful reviews

Tyler

Aberdeen, MS

Overall
Durability
Value
Features
Design
Usability

GREAT

February 17, 2009

THIS IS MY FIRST CROSSOVER IT MADE A BIG DIFFERENCE IN THE SOUND I WOULD TELL ANYBODY TO GET ONE.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Derek

Catonsville, MD

Overall
Durability
Value
Features
Design
Usability

Good processor

November 28, 2005

Paired with my Boss Rt850, this processor rocks. Plenty of versatility for future upgrades.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Product Summary

Manufacturer

Model Number

BX35

UPC

791489110143

Weight

2.00lbs

Internal SKU

bx35

Internal Product ID

2101

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Boss BX35