Expert Service 1-877-289-7664 [Hours]

Fall Blow Out Dot Sale

Orion XTRPRO122

12" Dual 2 ohm XTR PRO Series Car Subwoofer

Available. Only 2 Left!
|

List price $249.99

$249.95

with warranty

You Save: $0.04 (0.02%)

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Available. Only 2 Left!

Get FAST answers from customers ASK a Question See questions answers

  • 12" XTR PRO Dual 2 ohm Subwoofer
  • Power Handling:
    • Peak: 1000 watts
    • RMS: 500 watts
  • Polypropylene dust cap and paper cone is moisture and UV resistant
  • Nitrile-butadiene rubber surround enhances the linear excursion
  • Symmetrical tuned long-throw surround
  • Dual interlaced conex spider
  • Custom cast aluminum frame
  • Custom trim ring
  • Tinsel leads stitched and looped across spider
  • Venting in voice coil former is part of the enhanced voice coil cooling system
  • Advanced forced convection cooling system
  • Tri-cooling system
  • Copper wound voice coil on aluminum former
  • Sensitivity: 82 dB
  • Two large 48 oz. double stacked ceramic magnets (96 oz. total)
  • 1-year Sonic Electronix warranty

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
XTR Pro (Orion)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
12"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
1000 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
500 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
32 - 500 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
84 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
17.825 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Reinforced Paper
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Nitrile Butadiene Rubber (NBR)
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed
Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.5 cubic feet
Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.5 cubic feet
Minimum Ported Box Volume
This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.5 cubic feet
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Ported Box Volume
This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.5 cubic feet
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
6.45"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
10.91"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 10.
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 10.
Efficiency Bandwidth Product (EBP)
This number represents the trade off between having an efficient woofer and one with a wide bandwidth. To calculate this number, take the Fs and divide it by the Qes. If the number is below 50, the woofer is designed for a sealed enclosure only. If it's between 50-100 it can be used in either. Lastly, if it's greater than 100 it's designed for vented enclosures.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
82%
4 Star
18%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
4.8
Design
4.7
Usability
5.0
JVett

Tulare, CA

Overall
Durability
Value
Features
Design
Usability
Solid subs!

September 1, 2013

I've had two of these subs for quite a while now and they are pretty sweet! They've been in a sealed box and now most recently are in a transmission line. They beat hard on a Kicker ZX750.1. My system is tuned with a DD-1 so I've played them full undistorted volume for 3+ hours and never had a problem.

0 of 0 found this helpful

Help our customers find the most helpful reviews

M.H.

Franklin IN

Overall
Durability
Value
Features
Design
Usability
Orion Pro 12's Dual 2's

June 20, 2013

I like the Orions for the money I used them back in the day, always were good speakers. I use a Hifonics Brutus BRZ 1700 run in 2ohms. The amp has more RMS power than the speakers are rated but the Pro 12's love it. Have them in a ported box tuned at 34.5 hertz about 1.5cu ft. each and they sound awesome never distort or bottom out with any music I'm really happy. Going to be using it in my Son's car next.

0 of 0 found this helpful

Help our customers find the most helpful reviews

matt the bass head

mastic beach ny

Overall
Durability
Value
Features
Design
Usability
orion xtrpro122

May 14, 2012

I have 2 12s and they pound. For the money they are great, also I haven't even seen what they can do because I have them way under powered with rms.

0 of 0 found this helpful

Help our customers find the most helpful reviews

John

Wheat Ridge, CO

Overall
Durability
Value
Features
Design
Usability
good product

February 19, 2012

Recommended. Paired with a kicker dual channel and works great. No problems after 6 months.

0 of 0 found this helpful

Help our customers find the most helpful reviews

will

sturgeon bay, WI

Overall
Durability
Value
Features
Design
Usability
shocked

February 14, 2012

I was a little doubtful that this sub would have clearer bass than my polk audio SR series and what do you know i was right. Now dont get me wrong orion has been with me for a long time. If your looking to add bass to your car and dont want to spend a ton orion is where it is at. Although with their prices you would figure that it would be horrible it is not. It pounds pretty hard. Ported or sealed this subwoofer will make your vehicle thump the way you want.

0 of 0 found this helpful

Help our customers find the most helpful reviews

joshua

troy, VA

Overall
Durability
Value
Features
Design
Usability
super nice

February 2, 2012

These are awsome for 500w. Had to buy another one plus Sonic has a good price. Paid less than first one from other company, would recomend running 2 of these with 2 Pioneer Champion Series amps.

0 of 0 found this helpful

Help our customers find the most helpful reviews

corey

birningham, al

Overall
Durability
Value
Features
Design
Usability
orion xtrpro122

July 7, 2011

I have had my XTRPRO122 for 6 months now and I love it more now than before. I have it in a box with about 1.8 ft airspace ported to around 35-37 htz. built my box myself and am quite proud. No believes that 1 12 can possibly hit that hard, loud and clear. Best sub I ever owned and I've been doing this 22 years. cannot go wrong with this sub.

0 of 0 found this helpful

Help our customers find the most helpful reviews

tro

rayne louisiana

Overall
Durability
Value
Features
Design
Usability
super deep bass OMG!

March 8, 2011

I have a 2000 Ford Expedition with 6 of these with 3 3000 watt amps pushing these bad boys with 1 1000 watt amp on my highs all together 10,000 watts and wooooww the bass is so deep I can't sit in my car 2 mins I gotta get outta it I really would get these if I was you!

0 of 0 found this helpful

Help our customers find the most helpful reviews

tom

albion, MI

Overall
Durability
Value
Features
Design
Usability
Powerful Subwoofer

February 22, 2011

The Orion XTRPRO122 is a awesome sub! Very loud and very deep bass! I have it hooked up to a Orion XTRPRO5001 amp running at 1 ohm and omg!!! I bought another to hook up for twice the madness!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Corey

Alabama /California

Overall
Durability
Value
Features
Design
Usability
oooooweeeee

January 8, 2011

Just got my sub and sonicelectronix delivered it about 3 days early. That impressed me.I put it in a box that's about 1.8 cu. ft. ported at 38hz. It makes for a really good massage. At one point I thought I could see the bass note. I'm using a Hifonics brutus bxi608 and wired the sub to 1ohm which gives me about 600w. still have to get everything dialed in but it's already awesome. aAll I could say after that first note was oooooweeeee

0 of 0 found this helpful

Help our customers find the most helpful reviews

tro

lafayette la

Overall
Durability
Value
Features
Design
Usability
strong sub

April 3, 2010

i have 2 of these in a sealed box in my 2000 expedition and they hit hard, I'm really thinking about getting a 3rd 12!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

Single 12" Subwoofer Angled Truck or Hatchback Box Enclosure

CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil.

Your Price $34.99

12" Dual Sealed Subwoofer Enclosure

CARB Compliant, 3/4" MDF Dual Vented Enclosure w/ Premium Carpeted Finish

Your Price $89.95

12" Vented Subwoofer Enclosure

CARB Compliant, 3/4" MDF Vented Enclosure Lined with Premium Carpeted Finish

Your Price $65.95

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $44.95

20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

Your Price $59.99

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $109.95

Stinger Sound Dampening Trunk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

Your Price $69.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $6.99

Spring Post Terminal Cup

Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

Your Price $3.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $14.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $79.99

4 Ft of 1/4" Thick Black Heat Shrink Tubing

Provides abrasion resistance and added protection for your cables.

Your Price $3.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $8.99

12" Protective Waffle Subwoofer Grille

Keep your subwoofer looking amazing while keeping it safe.

Your Price $4.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

Your Price $299.99

1 Orion XTRPRO122 Subwoofer

Mono Amp

Mono Amp - Option 1

2 Channel Amp - Bridged

2 Orion XTRPRO122 Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp - Bridged

3 Orion XTRPRO122 Subwoofers

Mono Amp

Mono Amp - Option 1

4 Channel Amp

4 Orion XTRPRO122 Subwoofers

2 Channel Amp

4 Channel Amp

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

XTRPRO122

UPC

093207061417

Weight

22.50lbs

Internal SKU

xtrpro122

Internal Product ID

21157

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Orion XTRPRO122