Why Choose Kicker Amplifiers:
Kicker Performance Audio has been around since 1980 and has been producing amazing products since then. Kicker’s drive to consistently produce products that not only are great but also push the standards of the car audio industry is very apparent in all series of their amplifiers. All Kicker amplifiers are CEA-2006 Compliant, assuring you are receiving a continuous certified RMS power rating. Kicker will always exceed the rated power because Kicker is notorious for under rating their amplifiers. So really you will be getting more power than you actually pay for, which is not true for other lower end performance amplifiers that generally over rate their amplifiers. Kicker amplifiers will provide a choice of three automatic turn-on modes; remote, DC offset, or signal sense, which make them compatible with any car audio system. Along with their high-density convection heat sink for extreme heat dissipation and high efficiency MOSFET power supply, Kickers amplifiers are great way to go when selecting the perfect amplifier for your car audio system.
 |
- ZX Series 2-Channel Class AB Car Amplifier
- RMS Power Rating:
- 4 ohms: 70 watts x 2 chan.
- 2 ohms: 100 watts x 2 chan.
- Bridged, 4 ohms: 200 watts x 1 chan.
- Total RMS power output: 200 watts
- MOSFET power supply
- Wired remote bass level control optional (Kicker 10ZXRC)
- LED power and protection indicators
- Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
- Balanced differential inputs make KICKER ZX Amplifiers compatible with any factory radios
- Eliminates unwanted noise in a system
- Boost, gain, and crossover frequencies are top-mounted for easy access, and a handy protection indicator featuring a new flashing yellow low-voltage light enhances the end panel
- Bridgeable operation
- Speaker-level inputs compatible (switchable) through RCA connection, Kicker 09ZISL required and sold separately
- Automatic turn on modes: remote, DC offset, or signal sense
- Thermal, voltage, and short circuit protection circuitry
- Variable high-pass filter (50-200 Hz, 12 dB/octave)
- Variable low-pass filter (50-200 Hz, 12 dB/octave)
- Frequency response: 20-20000 Hz
- New front panel allows customization with decals
- CEA-2006 compliant amplifier
- Dimensions: 10-1/4"L x 9-5/8"W x 2-1/8"H
- 8-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.
- Authorized Internet Dealer
- 2-year Manufacturer's warranty
Extend your Kicker warranty to 3 Years when you install your new Kicker amplifier with a compatible Kicker power kit! For a limited time, you can register your Kicker amplifier and power kit to qualify for an additional year of coverage. This offer is only available through official Kicker dealers and will only last for a limited time. With this amplifier, the following power kits will qualify for the extended warranty program: Kicker 09PK8, Kicker 05CK84, Kicker 09ZCK8
Product History:
|
|
|
(newest, current model)
|
|
|
|
(previous model, replaced by Kicker ZX200.2 (10ZX200.2))
|
Sonic Electronix, Inc. can only ship Kicker products within the United States of America.
|
Average Customer Rating is 4.7 out of 5 stars:
Share your thoughts with others:
|
|
Average Attributes Rating:
| Durability |
|
4.0 |
| Value |
|
4.7 |
| Features |
|
4.3 |
| Design |
|
4.3 |
| Usability |
|
5.0 |
|
what's this?
|
|
|
Most Helpful Customer Reviews:
|
Review by
Jozef from dont worry about it
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
got this amp a few months ago, to start, the birth sheet said 264 watts. wow. i have it bridged to one kicker comp 4ohm 12 in a ported box and wow. fills my hole 2002 camry with great loud deep bass, and my camry is not a small car. sonic is awesome, i bought the 2010 model and they shipped me the 2011 model plus free shipping. i rock this amp for very long car rides and it doesnt even get hot, just barley warm.
not to mention nobody beats sonics prices, nobody !!!
|
|
Review by
ChillonDillon from Tampa, FL
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Replaced the 4 channel ZX350.4 with this one.....ditched the rear speakers.
This one came in rated at 265 watts!!! Perfect for powering Kicker 6 1/2" components. Awesome.
Been running smooth for over 6 months now.
I would buy again or recommend to a friend.
|
|
Review by
Christopher from Lampasas, TX
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Well, received this amp two days ago, hooked it up one day ago, and it is a nice little amp for pushing a pair of Kicker KS690s, but for pushing a Rockford Fosgate Punch (Stage 3), it's not so great...I hooked it up, was pushing the sub perfectly, not too low power, nor too high, just perfect, clean, bass. After 30 minutes of playing at high-volume...amp crapped out...I am still going to rate the amp 4 overall, just due to the fact that I should've given it time to " break-in ". All-in-all, if you are going to push a pair of (speakers) than this amp rocks. Recommend if you plan to use it for this purpose.
*Admin Note: This amplifier is rated at 200 watts RMS (at 4 Ohms), a Punch Stage 3 woofer is 500 watts RMS. These components were matched incorrectly and are likely the cause of the amp defect. Please power a Punch Stage 3 woofer with 500 watts RMS power.*
|
