Garage
Shop

Alpine KTP-445

Plug and Play Head Unit Power Pack for Use with all 2005-Up Alpine Head Units (Black Harness)

Alpine
Shop all Alpine
Product videos
highlight-star-icon

Power Pack 4-Channel Class D for Select Alpine In-Dash Receivers • 45W x 4 Chan. @ 4 Ohm • Adjustable Gain Switch • Plug-and-Play • CEA-2006 Compliant

Learn more about the ktp445

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

ktp445u thumbnail

Alpine KTP-445U Power Pack

OUR PRICE: $349.95

View item

Product Highlights


Power Pack 4-Channel Class D for Select Alpine In-Dash Receivers • 45W x 4 Chan. @ 4 Ohm • Adjustable Gain Switch • Plug-and-Play • CEA-2006 Compliant

Description


Alpine brand icon

Authorized dealer

  • Alpine Power Pack 4-Channel Class D for Select In-Dash Receivers
  • Increases the output of an Alpine headunit without having to install a full size amplifier and amp install kit
  • The fast and easy solution to higher power aftermarket sound
  • RMS Power Rating:
    • 4 ohm: 45 watts x 4 chan.
  • Total RMS power output: 180 watts
  • Gain switch is adjustable from high to low
  • Plug-and-play design for compatible Alpine headunits
  • Plugs directly into the wiring harness of the Alpine receiver
  • Fast and simple installation
  • 4 channel operation for four speakers
  • Minimum impedance of 4 ohm
  • Is not compatible with factory amplifiers
  • CEA-2006 compliant amplifier
  • Frequency response: 20-20,000 Hz
  • Fuse Rating: 15A x 1
  • Dimensions: 7-13/16D x 2-9/16"W x 1-1/2"H
  • 1-year SonicElectronix.com warranty

Alpine products are warranted solely by Sonic Electronix, Inc. under the same period and terms as the original Alpine warranty. Sonic Electronix is not an Authorized Alpine Dealer and Alpine requires all merchandise purchased by Sonic Electronix customers to be returned solely to Sonic Electronix. Alpine products are also covered by our Standard Return Policy for returns on exchanges or refunds within 30 days from the date of purchase.

Product history:

Alpine KTP-445U thumbnail
(newest, current model)
Alpine KTP-445 thumbnail
(previous model, replaced by Alpine KTP-445U Power Pack)

Best selling similar products

VADM4v2 small

NVX VADM4 v2 (VADM4v2)

• 80 watts x 4 channel @ 4 ohm
• 125 watts x 4 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable 4-Channel Amplifier

(41)

$209.99

List price $239.99

NDA6004 small

NVX NDA6004

• 100 watts x 4 channel @ 4 ohm
• 160 watts x 4 channel @ 2 ohm
• Bridged: 320 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 4-Channel Amplifier

(14)

$159.99

List price $215.99

RD400/4 small

JL Audio RD400/4

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable 4-Channel Amplifier

(28)

$379.99

List price $379.99

MFA 4.220 small

Deaf Bonce MFA 4.220

• 220 watts x 4 channel @ 4 ohm
• 330 watts x 4 channel @ 2 ohm
• Bridged: 660 watts x 2 channel @ 4 ohm
• Total RMS Power: 1320 watts
• Class D 2 ohm Stable 4-Channel Amplifier

$289.90

List price $289.90

JD400/4 small

JL Audio JD400/4

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable 4-Channel Amplifier

(34)

$299.99

List price $299.99

MFA 4.180 small

Deaf Bonce MFA 4.180

• 180 watts x 4 channel @ 4 ohm
• 270 watts x 4 channel @ 2 ohm
• Bridged: 540 watts x 2 channel @ 4 ohm
• Total RMS Power: 1080 watts
• Class D 2 ohm Stable 4-Channel Amplifier

$259.90

List price $259.90

DS 1200X4 small

Taramps DS 1200X4

• 192 watts x 4 channel @ 4 ohm
• 300 watts x 4 channel @ 2 ohm
• Bridged: 600 watts x 2 channel @ 4 ohm
• Total RMS Power: 1200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

(5)

$219.99

List price $258.00

VAD10004v2 small

NVX VAD10004 v2 (VAD10004v2)

• 150 watts x 4 channel @ 4 ohm
• 250 watts x 4 channel @ 2 ohm
• Bridged: 500 watts x 2 channel @ 4 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable 4-Channel Amplifier

(24)

$279.99

List price $335.99

R2-500X4 small

Rockford Fosgate Prime R2 R2-500X4

• 75 watts x 4 channel @ 4 ohm
• 125 watts x 4 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable 4-Channel Amplifier

(10)

$359.99

List price $359.99

MVPA4 small

NVX MVPA4

• 100 watts x 4 channel @ 4 ohm
• 150 watts x 4 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 4-Channel Amplifier

(70)

$279.99

List price $383.99

Specifications & Details


Power Specifications - Full Range Channels
RMS Power @ 4 ohms
45 watts x 4 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
4-Channel
Total RMS Power Output
180 watts
Maximum Input Gauge Size
Wire Harness
THD at Rated RMS Power
1%
Speaker Level Inputs
Yes
Preamp Outputs
No
Built-in Crossover
None
Remote bass/level controller
No
Fuse Rating
15A x 1 
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Item Details


Manufacturer:

Model Number:

KTP-445

Weight:

2.00lbs

Internal SKU:

ktp445

Internal Product ID:

22630

Product and How-to Videos


Customer Ratings & Reviews


Alpine KTP-445 thumbnail image

5 star
69%
4 star
25%
3 star
6%
2 star
0%
1 star
0%



Durability
4.6
Value
4.5
Features
4
Design
4.3
Usability
4.7

Customer Reviews

Sort by:

Loading...

Great

Great amp got it to to get my bass back after changing my speakers in a 05 impala boy did it do the job my jbl gto928 and gto628 scream now, by the way bypass factory amps for best results

By moneymizthadon on April 12, 2014

50 found this helpful


Alpine KTP-445?

I just bought this, Maybe I should take it back! My Alpine CDA-105 sounds a little better without the KTP-445 installed. Others may have luck with this little amp but not me. Well i guess it sounds about the same as my CDA-105 hooked up straight to the speakers. It doesn't sound like 45 watts RMS, more like 25W RMS x4!

By Ace on August 9, 2010

48 found this helpful


Alpine KTP-445

First of all, i dont quite hear much of a difference or increase in my sound quality or power. maybe a little, but not much. kind of made me mad that i spent 110 bucks for my CD player not to distort a couple more volume levels. i guess that's why they make 4 channel amps. would not recommend unless you really don't want to put a 4 channel amp together. its kind of hard to fit behind your CD player too with all the wires. but on the other hand. it does sound good!

By Nick on July 21, 2010

46 found this helpful


Great Add...

I have this amp installed in my `90 Jeep Wrangler.. I chose it for two reasons.. 1. - compact size.. 2. - good little boost.. It is hooked to the Alpine CDA - 9886M.. I wanted to make sure I had enough power behind the 6 1/2`s and 6x9`s to sound good and it did the job well.. The amp is so small I have it mounted inside the overhead Tuffy Security console with the deck.. Worked out great because I didn`t want a big amp on the floor of the jeep - Space is limited in a Wrangler and amps don`t like the deep water crossings on the trails... =)

By BLU RCK on May 26, 2010

45 found this helpful


Decent

What I like: It's dummy proof. Plug n play. 1 switch for low/high on the back.
What I don't like: Lots of wires, and still bulky. You need a lot of room to hide it.

What could have been done better: Remote for the switch because you will have to get behind the radio or wherever you mounted this to change from low/high. And some wire loom to make it easier to fish the wire.

Other thoughts: it works well, paired with kenwood components and alpine cde-126bt. Volume cranked to 24 and it screams. Without this the volume would have to be at 26 for the same sound. So it does work, well it's meh/ok. The headunit has decent output as it is so if you have a crap headunit it's worthwhile. It is worth the price.

By Paul on November 17, 2011

43 found this helpful


A Professional View

I've been a mobile electronics installer for nearly 30 years. The KTP-445 is a nice amp, but the buyer should be aware of its purpose. This amp is not designed to run subwoofers. Its primary use is to improve the response and lower distortion of four typical full-range speakers. Used with modern Alpine head units, it is a simple plug-in installation. Just unplug your radio at the back, plug one harness back into the radio and the other into the harness you removed. That's it! The amp is so small, it will fit behind most radios or under the dash. There's a fair amount of harness to make it easier to locate. You aren't going to experience a great deal more of volume. Remember, practically all head units today already output from 18-23 watts per channel, so this amp is only about twice that and you don't add that to the radio's power, you REPLACE it. Doubling power gives you only about 3 decibels more volume, barely detectable to the human ear.

Finally, notice that this amp DOES NOT have RCA inputs. It can be wired to other brand radios, but you need to know what you're doing: Not advisable for the novice.

By Randy on October 7, 2010

44 found this helpful


small and easy install

I love this product because its small enough to hide behind my dash, no wiring kit necessary so that saves time effort and money. only drawback is only 45rms. its not a lot so if you every get better speakers a bigger amp might be necessary however i could hear a difference in the sound quality. Highly recommend.

By Tracie on May 6, 2011

42 found this helpful


Good value

For someone with an Alpine head unit that wants a little more volume but does not want to aliens the cash on an amp kit and rca's, not to mention labor out the extra cost of a conventional four channel amp, this thing does pretty well. I had this in my ride and it did a nice job. Not a ton of features, but of the head unit had cross over ability and you have reasonable expectations for this, it is a great convenient low cost option to improve your sound system.

By Buc Nasty on October 17, 2011

40 found this helpful


Love It

I was trying to choose which way I wanted to go with my highs in my 1998 Lincoln Navigator. And I choose to go with the KTP-445. At first I was wondering would this be enough power and after I installed it. I felt in love with it.

By Lee on May 18, 2012

42 found this helpful


KTP-445

You might want to get an amp with more power.

By Shi on May 1, 2011

39 found this helpful



Related Searches


Save up to 10 different vehicles in your garage

Add vehicle
Loading...
Identify your vehicle and submodel details
  • Owner's manual
  • Vehicle's insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver's side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon

Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

  • You see only parts engineered for your exact vehicle
  • You avoid incompatible radios, speakers, or wiring
  • Installation is smoother, faster, and frustration-free
  • You get the correct accessories the first time

Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.