Garage
Shop

Hifonics HFi1500D

1500 Watt RMS Class D Monoblock HFi Series 1-Ohm Stable Subwoofer Amplifier (HFi 1500D)

Hifonics
Shop all Hifonics
EXCLUSIVE
Product videos
highlight-star-icon

• 4 ohms: 500 watts x 1 chan.
• 2 ohms: 1000 watts x 1 chan.
• 1 ohms: 1500 watts x 1 chan.
• Wired remote bass level control included
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Signal to Noise Ration: >95 dB

Learn more about the hfi1500d

We apologize

This item has been discontinued

Product Highlights


• 4 ohms: 500 watts x 1 chan.
• 2 ohms: 1000 watts x 1 chan.
• 1 ohms: 1500 watts x 1 chan.
• Wired remote bass level control included
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Signal to Noise Ration: >95 dB

Description


Hifonics brand icon

Authorized dealer

POWER SYSTEM WARNING: This amplifier requires a charging system capable of at least 150 amps. If your vehicle's charging system isn't powerful enough, it will damage or destroy this amplifier and possibly damage your vehicle, as well as void your warranty on the amp. You must perform electrical system upgrades to provide the power this kind of amp demands. Visit our Mean Green High Output Alternators store to find the right alternator for your vehicle.
For More Savings, Check Out The "Related Items" Tab.




HFi Retro Style, Advanced Technologies

The HFi1500D complements any application for your subwoofers. Today's high output subwoofers require only the finest, dedicated power to run loud and constantly in any vehicle. The HFi Monoblock series of amplifiers meets these expectations and will gladly get your system that extra bass you're looking for.

Incorporating Class D circuitry to allow for dedicated, efficient power allows for higher bass response, and not sacrificing any sound pressure. Why neglect your subwoofer of the high power output it truly demands? The HFi Class D Monoblocks are affordable, extremely powerful, and designed with a pleasantly small chassis. This allows the high power output amplifiers to take up the least amount of space in any installation.

The included bass knob can allow you to adjust your bass to match any music type, and allows you to replicate your bass to compliment any genre type. Integrating the Pulse Width Modulated MOSFET power supply to allow for efficiency on your car battery allows this amplifier to put out impressive power without drawing too much from your car's electrical system. Value is truly defined with HFi1500D - get yours today!



General Features

  • HFi Series Single Channel Monoblock Class D Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 500 watts x 1 chan.
    • 2 ohms: 1000 watts x 1 chan.
    • 1 ohms: 1500 watts x 1 chan.
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Heavy duty aluminum alloy heat-sink
  • Input sensitivity: 200mV - 6V
  • Frequency Response: 15 - 250 Hz
  • Total Harmonic Distortion & Noise: <0.05
  • Signal to Noise Ration: >95 dB
  • Damping Factor: >200
  • Variable low-pass filter: 30 - 250 Hz, 24 dB/octave
  • Subsonic filter: 15 - 35 Hz
  • Variable Bass Boost: 0 to +10 dB bass boost at 45 Hz
  • Fuse Rating: 70A x 2
  • 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Dimensions: 8.82"W x 14.65"L x 2.4"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty
Check out the Hifonics HFi1500D Owner's Manual

Specifications & Details


Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
500 watts x 1 channel
RMS Power @ 2 ohms
1000 watts x 1 channel
RMS Power @ 1 ohm
1500 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total RMS Power Output
1500 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
1 ohms
Minimum Impedance Bridged
Not Bridgeable
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Subsonic
Low-Pass Crossover Frequency
30 - 250 Hz
Subsonic Filter
15 - 35 Hz
Signal-to-Noise Ratio
>95 dB
Bass Boost
0 - 10 dB
Remote bass/level controller
Yes
Fuse Rating
70A x 2 
Strappable
No
Sonic Certified Amplifier
Not Tested
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

HFi1500D

Weight:

13.00lbs

Internal SKU:

hfi1500d

Internal Product ID:

22707

Product and How-to Videos


  • How To Install an Amplifier: Car Amplifier Basics Part 2

Customer Ratings & Reviews



5 star
83%
4 star
11%
3 star
3%
2 star
0%
1 star
3%



Durability
4.7
Value
4.8
Features
4.6
Design
4.7
Usability
4.8

Customer Reviews

Sort by:

Loading...

Very Efficient

Bought one from Sonic in 2010, and I had it on a pair of Kicker L5 10's I also purchased from sonic. It works very well until I was bassin in the rain, trunk was flexin so hard that water got into it. Unfortunately water damage is not covered under warranty. If you want bass that flex everything and makes your wipers bounce of the windshield, get it.

By Rasta on August 5, 2014

59

found this helpful.

pretty good

This is a damn good amp for the price , I would recommend it to anyone wanting moderate power of about 1200 true watts , its pushes my 2 Memphis mojo 15s damn good ... But on the bad side I had one of these amps just randomly burn up on me in just 5 days but the warranty saved me . But good buy if youre on a budget !!!

By khalid on September 2, 2014

52

found this helpful.

Great Amp for the price

I was looking for an amp for my skar vvx 12's and this was perfect. While the price of the amp is very cheap it is very powerful and i haven't had any problems with it so far.

By michael on October 24, 2012

48

found this helpful.

Awesome Product

I bought this amp about 2 months ago to power 3 12" 400 rms subs and it is great. Couldn't have gotten such a good amp anywhere else for this cheap.

By Dill on June 20, 2010

45

found this helpful.

Hifonics 1500D

Doesn't overheat, good versatility, and pushes your sub to the max :)

By I4man on November 15, 2012

43

found this helpful.

HFi 1500 Monoblock

This item worked perfect it has a lot of power and is easy to install and worth every dime, I recommend this product for pure bass heads.

By Saintj on August 21, 2012

42

found this helpful.

great amp

Im always trading car audio and i traded some stuff for this amp and planned on selling the amp on ebay well i wired it up in my truck and it sounded way cleaner and louder than my rockford fosgate amp (worth $500) i couldent believe that this amp cost so little. at the time i was running 2 kicker cvr subs , then on a kicker L5 , then to my sundown sd-2 subs, and now on my new sundown sa-8's. DONT THINK TWICE ABOUT BUYING THIS AMP IM KEEPING MINE TILL IT DIES.

By (INSERT NAME HERE) on January 16, 2013

40

found this helpful.

Great amp

Great amp it pushes four 12" kickers hard. this is a great amp if you are looking for this power. i also had a power acoustic 4000 bamf and the hifonics pushed the subs harder.

the only problem i had was the allen wrench terminals. i couldnt find a allen wrench that fit right.. but once i fiddled with it and got it secure it was great.

By mitchell on August 29, 2011

41

found this helpful.

HFI1500D

Great amp ive always ran Hifonics amps for my systems. I just bought this Amp for my 2 Pioneer Championship Series Pro 10 inch Subwoofers. I installed the amp and it sounded great. Hits lows harder than any other set up in town. Although i had some trouble with a defective amp at first after i got my RA and sonic sent me a new amp i couldnt be happier. Thanks Sonic

By Alex on August 26, 2014

38

found this helpful.

uh so so

Had this amp for about 5 months and it gave out on me went in protection mode and wouldnt come out. I have 2 alpine type-r's 12" an d it powered them great, had second battery for the amp had little to no light dim. I put a 500 watt kicker to them just to have something till this amp was fixed and the kicker never gave out sounded great, I would not recommend this amp.

By jason on February 15, 2012

38

found this helpful.

Add-ons


Similar Products

Best selling similar products

Alpine MRV-M500

• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier

(36)

$164.95

NVX VAD17001

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

(27)

$214.99

JL Audio JD1000/1

• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier

(2)

$399.99

Crunch GP-3500.1D

• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier

(6)

$99.99

Kicker CXA1800.1 (46CXA18001T)

• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier

(9)

$399.96

Related Products

This item is frequently compared to these items

Belva 1.0 Farad Capacitor + Belva 2000 Watt Max Handling Amp Kit (Black/Grey)

• Complete 4 Gauge 2-Channel Amplifier Installation Kit
• 1.0 Farad Capacitor
• Designed Specifically For Car Audio Systems Up to 1000 Watts RMS (2000 watts MAX)
• Premium Power and Ground Wire Provides Optimal Power Transfer
• 30% Copper CCA Wire
• Perfect for Systems up to 1000 Watts
• Audible Warning
• Red Voltage Display
• Mounting Brackets Included

(1)

$59.99

Related Searches


HFi1500D small

Item added to your cart.

Price: $139.99

Essential add-ons
Belva BAK42BK

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
Belva BAK42BL

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
InstallBay AK4ANL

Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder

$49.99

$29.99

Add to cart
T-Spec V6-RAK4

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$44.00

$31.99

Add to cart
Cerwin-Vega CAK42

Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$99.99

$119.99

Add to cart
NVX XAPK4

4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire

$114.99

$84.99

Add to cart
Stinger SK4241

4 Gauge Power Amplifier Installation Kit

$129.00

$64.99

Add to cart
Stinger SK6241

4 Gauge Power Amplifier Installation Kit

$159.00

$79.99

Add to cart
NVX XMICROLOC2

Add a 2-Channel amp without replacing your factory radio

$18.49

$14.99

Add to cart
NVX XBBR2

Looking to fine tune the bass in your vehicle? Look no further

$149.99

$69.99

Add to cart
The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

$149.00

$149.00

Add to cart
NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

$18.99

$12.99

Add to cart
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

$14.99

$6.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
SHURiKEN SK-BT100

12V High Performance AGM Power Cell Battery for Systems Up To 2000 Watts

$349.99

$329.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
Belva BB2D

2.0 Farad Capacitor with Digital Red Display

$89.99

$39.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon