The Legend Redefined
There’s more to this multi-channel amplifier than meets the eye. Hifonics Zeus amplifiers are redesigned to not only look different, but also provide clean, true power. Designed to complement the Brutus Class D series of amplifiers, there’s no better match for a multi-channel amplifier.
The newly implanted vertical fin heat-sinks are designed to allow maximum heat dissipation from the amplifier, which allows this amplifier to run much more efficiently and have less impact on your car battery. Their new series of amplifier is now CEA-2006 compliant, meaning their specifications have met CEA standards and their output is certified and true.
Zeus Amplifiers incorporate Ultra-Fi MOSFET output devices, which will decrease overall distortion and allow your amplifier to output nothing but pure high-fidelity audio. The smoothness of Ultra-Fi will remove electrical interference and noise that’s usually generated by amplifiers, and allow the user to enjoy noise-free music. Zeus amplifiers combined clean power, heat dissipation and Ultra-Fi circuitry makes this amplifier unrivaled for any application. The God’s have bestowed clean, pure power. Enough compromising – it’s time for a Zeus.
- Zeus Series 4 Channel Class A/B Car Amplifier
- RMS Power Rating (@ 14.4V):
- 4 ohms: 80 watts x 4 chan.
- 2 ohms: 160 watts x 4 chan.
- Bridged, 4 ohms: 320 watts x 2 chan.
- MOSFET power supply
- Wired HFR-3 remote bass level control included
- LED power (green) and protect (red) indicators
- Variable Bass Boost (0 to +10 dB bass boost at 45 Hz)
- 2/3/4 channel operation
- Preamp RCA outputs to daisy chain multiple amps
- 4-Way System Protection circuitry (thermal, overload, speaker short and DC protect)
- Heavy duty aluminum alloy finned heatsink for maximum heat dissipation
- Silver-plated unbalanced RCA level inputs
- Silver-plated molded screw terminals
- Input sensitivity:
- Input Level (Balanced): 0.02V-6V
- Variable low-pass filter (35-150 Hz)
- Variable high-pass filter (10-15,000 Hz)
- Crossover switch: HI/Full/LP/BP
- Damping factor: >180
- Frequency response: 10-45,000 Hz
- Signal to noise ratio: 90dB
- CEA-2006 compliant amplifier
- Dimensions: 16-1/6"L x 9-1/4"W x 2-7/16"H
- 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
- Authorized Internet Dealer
- 1-year Manufacturer's warranty
Read more about the Hifonics Zeus ZXi80.4 in our blog!
Product History: |  |
| (newest, current model) | |  |
| (previous model, replaced by Hifonics Zeus ZXi80.4) | |  |
| (previous model, replaced by Hifonics ZXi 4410) | |  |
| (previous model, replaced by Hifonics ZXi 4408) | |  |
| (previous model, replaced by Hifonics ZXi 4406) |
|
|
Average Customer Rating is 4.6 out of 5 stars:
Share your thoughts with others:
|
|
Average Attributes Rating:
| Durability | | 4.5 |
| Value | | 4.7 |
| Features | | 4.8 |
| Design | | 4.6 |
| Usability | | 4.5 |
| what's this? |
|
|
Quick Comparison:
|
|
Most Helpful Customer Reviews:
|
Review by
johhnybo from Australia, Australia
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Since buying this has powered four speakers for the last 6 months and has performed great.
|
|
Review by
kenneth from Sacramento, CA
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Beautifully made amp. Powers my Alpine SPS-610c components wonderfully. Hifonics always provides very good quality products for the price. Wouldn't buy anything else.
|
|
Review by
Hector from cibolo, TX
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
After installing the amp after five days quit working. I took it back to the shop and the installer said the output side of the amp doesn't work. Not good.
|
|
Review by
Ryan from Puyallup, WA
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I have the 150.4 running my ID CTX65cs mids, and 80.4 running my tweets. These are excellent amps that do rated power. My front stage gets way louder then you would want to know, and sounds clean doing it.
(If you do not supply a large enough conductor for your current draw, of course one will cut out. Your autotek is simply taking more current draw and you are not providing enough for both amps. Next time run a 1/0 back to your amps with a dist. block and two 4ga. wires feeding the amps individually and you will be fine.)
|
|
Review by
Jim from Ceres, CA
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
The title says it all, this is an awesome amp. I have been into car audio for about 20 years and have had many different amps and these are high quality. It replaced a Rockford Fosgate P450.4, it has a warmer, cleaner sound and adds a nice punch to my components. My DVD's sound amazing. I have ordered a Hifonics Brutus BRZ1700.1D for my HX2 12's.
|
Customer Service
