Expert Service 1-877-289-7664 [Hours]

Free eGift Card Promo

Visonik V210BS

1300W, Dual 10" Loaded Subwoofer Enclosure with Amplifier, Amp Kit and Remote Bass Knob

Discontinued
|

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

The Bass Stimulus Package

For adding bass on a budget, look no further than the Visonik Bass Stimulus package! This all-in-one package includes everything that you need to add some low bass to your car, truck, SUV, or van. This 10 inch version includes two 10" subwoofers loaded in a vented box, as well as an amplifier and amplifier installation kit. The great design of this enclosure will match just about any vehicle's interior. Perfect for budget installations, entry-level systems, and those just starting to put aftermarket components in their car. It's hard to pass up a deal as great as this Bass Stimulus Package!

Subwoofer Features:
  • Dual 10" Single 4 Ohm Visonik Subwoofers
  • Subwoofers preloaded in a vented enclosure
  • Power Handling:
    • Peak: 1300 watts
  • Impedance: Single 4
  • Impact resistant polypropylene cone
  • Butyl rubber surround
  • Cotton cloth treated spider
  • Stamped steel metal basket
  • Single 1.5" voice coil
  • Double charged ferrite magnet
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty (Subwoofer and Amplifier Only)
General Enclosure Features:
  • Dual 10" Vented Enclosure
  • Fine H.D. Fiberwood box material
  • Miter joint box construction
  • Heavy duty industrial aviation carpet
  • Gold plated 5-way binding posts
  • Dimensions: 8-1/2"TD x 11-1/2"BD x 29"W x 13"H
Amplifier Features:
  • Visonik 2-Channel Class AB Car Amplifier
  • Max Power Rating:
    • 4 ohms: 300 watts x 2 chan.
    • 2 ohms: 600 watts x 2 chan.
    • Bridged, 4 ohms: 1200 watts x 1 chan.
  • Max power output: 1200 watts
  • MOSFET power supply
  • Wired remote bass level control included
  • Power and protection LED indicators
  • Tuned Bass EQ remote (0-12 dB bass boost)
  • 2/1 Channel operation
  • Speaker-level inputs with signal sensing for automatic turn-on)
  • Variable active crossovers
  • Thermal, short, and overload protection circuitry
  • Adjustable gain input sensitivity
  • Heavy duty aluminum alloy heatsink or High-density split-dome convection heat sink for extreme heat dissipation
  • Gold-plated RCA level inputs
  • Gold-plated screw terminals
  • Input sensitivity: 0.3-7V
  • Variable high-pass filter (50-500 Hz)
  • Variable low-pass filter (50-250 Hz)
  • Frequency response: 20-25,000 Hz
  • Dimensions: 7-7/8"L x 8-5/8"W x 1-1/2H
  • 1-year Manufacturer's warranty (Subwoofer and Amplifier Only)
Amplifier Installation Kit Features:
  • Copper-plated aluminum power cables
  • Butt, spade, and o-ring connectors
  • Tie wraps
  • Fuse

Amplifier Power Specifications

Peak Power Output
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison.

600 watts x 2 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

AB
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
2
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

1200 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
8 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
.1%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
No
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
High-pass (HP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 500 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 250 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
89 dB
Channel Separation
Also referred to as crosstalk. The amount of interference on one stereo channel caused by the leaking of the other stereo channel. The higher the rating in decibels (dB), the better the Channel Separation.
57 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 12 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
25A x 1 

Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Total Peak Power Handling
This is the Total Peak Power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total peak power handling for all of the subs combined.

Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements.
1300 watts
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polypropylene
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Vented / Ported
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
2
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
Truck Style, Slim with Angled Front
Height
The height of the item, measured from top to bottom, in inches.
13"
Width
The width of the item from left to right (side-to-side) measured in inches.
29"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
8-1/2"
Second Depth
The second depth is used only when the box is slanted or angled. This value is the top measurement and it is measured in inches.
11-1/2"
Wood Thickness
The thickness of the wood the enclosure is made of, measured in inches.
3/4"
Number of Terminals
The number of terminals the enclosure has. Each terminal represents 1 positive and 1 negative.
2
Terminal Type
Spring clip terminals work best with bare wire connections with small-gauge speaker wire, or pin-type connectors.

Binding post terminals are a sturdier, more versatile type of speaker terminal. Because binding post terminals are are threaded, you can tighten them down against the wire or connector for a tight, clean connection. The most popular style of binding post terminals is known as a "5-way binding post". This type can accept bare wire, or any of the common speaker wire connectors. Binding posts with the option to be used with banana clips are even more versatile

Spring posts are a hybrid of the two. Instead of using a thread and "screwing" them tight, they use a spring to allow the wire to fit and tighten against the terminal.

Binding posts
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Black
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
Carpet
Final Wired Impedance
This is the final impedance of the system as the amplifier will see it. If the final impedance is for two sets, it means that the enclosure has two sets of terminals at the listed impedance.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
59%
4 Star
21%
3 Star
14%
2 Star
0%
1 Star
7%

Average Attribution Rating

Durability
4.0
Value
4.5
Features
4.3
Design
4.4
Usability
4.6
Jeff

Murfreesboro, TN

Overall
Durability
Value
Features
Design
Usability
You get what you paid for.

October 17, 2012

At first it does great. Depends on how long you listen to your system. The amp is not of great quality. It will run hot and shut itself off. If you purchase this keep all your original packaging because you'll pay deep out of your wallet to send it back to SonicElectronix. Over all I hated this product. Don't wast your money or your time. It aint worth it.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Matt

Tulsa, OK

Overall
Durability
Value
Features
Design
Usability
Visonik V210BS

August 16, 2012

I bought this package 6 months ago. Subs are pretty good and hit decently hard, they'll shake your rearview a little, but not too audible outside the car. Amp however is crap. Overheats pretty bad and I only have it at 2/3 gain. I hardwired a laptop fan under it, and seems to help it. I would recommend to beginners, or those people who just want crisp bass. If you're looking to rattle the car next to you... Invest in a higher-end system!

0 of 0 found this helpful

Help our customers find the most helpful reviews

alex

Moline, IL

Overall
Durability
Value
Features
Design
Usability
great little subs

July 20, 2012

This was my first setup I've had in my car, and they shook my mirrors. It was weird, 'cause I couldn't hear them outside of my car unless I had my head in the window. Wish they could've put 'em in a bigger box though.

0 of 0 found this helpful

Help our customers find the most helpful reviews

SnowKing

Gunnison, CO

Overall
Durability
Value
Features
Design
Usability
Great Subs OK Amp

July 19, 2012

I bought this system over summer and I had them bumping all summer long, and even all the way on a drive from NC to CO which is a far drive. Worked great when I did go to feel the amp was hot. The subs bumped pretty well I thought until after arriving in CO and driving for another couple months the amp went dead. So, I picked up a BOSS PH2.600 amp off here and when that puppy came in was a great day for my ears. I thought the subs were good at first, but with a true better quality amp these subs bump so hard, and a lot crisper and clearer sound. Get them and possibly buy upgrade amp right away or wait til the other comes with it dies. It's still a great deal. It's hard to find a complete sub kit better than this price.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Dro

Long Beach, CA

Overall
Durability
Value
Features
Design
Usability
Good Experience

January 3, 2012

The purchase of my Sonic subwoofer kit was very good experience from start to finish. I'm very happy with the speakers and the kit had all the necessary parts to install the sub-woofer. The only thing that I would have liked in addition would be a grill to protect the speakers.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Pee Jay

Valencia Ca

Overall
Durability
Value
Features
Design
Usability
HORRIBLE PRODUCT!!!

December 6, 2011

They sounded great when I first got them. They bumped, but wasn't super loud. And definitely did not feel like 1200W. The subs blew out within a couple weeks. I took it back to sonic and they gave me new subs. Those blew out in a couple weeks as well. I swapped them out for some pioneers, and they sound WAY better then this Visonik crap. But my amp would over heat, and sometimes shut itself off. It recently died, and now im in the market for a new amp. I had the amp for about a year. I will never buy another Visonik product again.

0 of 0 found this helpful

Help our customers find the most helpful reviews

vlademir

Canada

Overall
Durability
Value
Features
Design
Usability
good product

October 10, 2011

Nice sound and good product. Thank you for the item have a good day!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Jared

Joliet, IL

Overall
Durability
Value
Features
Design
Usability
Good Starters

October 2, 2011

I bought these when i heard my cousin's subs and like them. He had twelves though. when i got these they were great they sounded great and they did what they were made for. i had them in a 2000 accord ex and they were perfect for it. They didnt take up the whole trunk so i could still use it. they sounded good but they only shaked the mirrors a little on the right songs. for only 155 it is the cheapest starter set you will find. if you are just getting into subs get these it is worth it. if you have these and want to upgrade sell the subs and keep the amp. you can buy a pair of kicker comp 12s and a box for around 200. those wont disappoint that is what i have know in a 2000 civic ex. the only problem with those is you wont have any of your trunk left but you just have to pick what you want.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Tanner

Chico, CA

Overall
Durability
Value
Features
Design
Usability
You get what you pay for

August 30, 2011

So far so good but i was expecting them to be louder based on other peoples reveiws, mine are in a trunk however and that dampens them alot. They definitely add a good amount of bass to the music and definitely not to the point of it being overpowering. The wiring kit is garbage though and i recomend you buy new wiring for it. Overall, id say you get the amount of bass you pay for. id like to be able to turn my subs up to the point where you drown everything out just for fun, but you wont be able to do that, not in my car anyway (2000 3 series bmw)

0 of 0 found this helpful

Help our customers find the most helpful reviews

Eddie

Waco, TX

Overall
Durability
Value
Features
Design
Usability
Awesome pound for the buck

August 24, 2011

We bought this Sub-Woofer and amp to go with our Jensen DVD Head Unit. We installed it in our Motorhome. Before we bought the Combo. I had read the reviews on it, the people that bought the system were quite happy with it. We are very happy with it also, regardless if we are listening to music or watching movies, the amp is barely warm, and the subwoofers just keep pounding hard. I really love the remote adjust, sometimes we need more bass sometimes less, just reach down and adjust. So I say yes buy this combo, don't let the low cost scare you, and sounds just as good as the system we had in our other Motorhome, I installed a Kicker Amp. and a JBL 12" Comp sub in it. Like the other folks I also used my own Power Cables, I used 4 gauge. I saved the supplied cables for something else. So buy and enjoy!

0 of 0 found this helpful

Help our customers find the most helpful reviews

monster

saint meinrad, in

Overall
Durability
Value
Features
Design
Usability
good value for th the monet

July 18, 2011

sounds ok for the cost its not mindblowing bass but got good thump to them thats all i need for me

0 of 0 found this helpful

Help our customers find the most helpful reviews

WIll

Forest CIty, PA

Overall
Durability
Value
Features
Design
Usability
Wpaulin

June 22, 2011

Great product, Nice sound easy to install

0 of 0 found this helpful

Help our customers find the most helpful reviews

bill

Carson city,NV

Overall
Durability
Value
Features
Design
Usability
unbelievable!!

June 15, 2011

Ordered a two ten inch sub and had it at the house in 2 days, and the product is a great value for the price and has awesome bass and hits hard

0 of 0 found this helpful

Help our customers find the most helpful reviews

Zoid

Tahoe City, CA

Overall
Durability
Value
Features
Design
Usability
Pretty good, not amazing...

June 9, 2011

This set up was fairly easy to install but comes with NO speaker wire! Make sure you have some! I would only recommend this kit to someone who doesn't plan on bumping it too hard. That's what I thought I was but I got addicted and I'm looking to really bump up my system. The left casing on the actual sub came loose and I don't know what to do about it because it's on the actual speaker and I don't want to mess it up. Good first kit, don't plan on having it for more than two years I would say. You will want more. And more.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Polo

Collinsville, Illinois

Overall
Durability
Value
Features
Design
Usability
Great price. Decent quality.

April 3, 2011

The price on this package cannot be beat. The quality is pretty good but definitely not the best. Those who say these compare to the super expensive subwoofers have never experienced the more high-end market. The quality is extremely good for the price. Great learners kit for beginners. Like the others said, the wiring kits isn't too good. I got a $25 kit from Wal-Mart and it works great. I would recommend these to somebody on a budget but if you have wiggle room, buy higher quality subs.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Eddie

Waco, TX

Overall
Durability
Value
Features
Design
Usability
Awesome Boom For The Dollar!

March 6, 2011

I bought this System because of the Reviews I had read on it, It lives up to those Reviews. I got the Visonik V210BS for our Motorhome, so not only does it deliver Sub-Bass for Music but also for Video, for that Home Theater Sound. We also bought the Jensen HD/DVD Head-Unit to go with it, together they really deliver. It is the second time I have done this to a Motorhome, the first time it was a Jensen HD Unit with a JBL Cast Basket 12" Sub (It's weight about18 to 20 lbs. it was heavy),with a KICKER Comp Amp. Combo, of course it cost three times what the Visionik System did, but I must say the Visionik System hits just as good if not better! I did use my own 4 gage Power & Ground Cables, I will not bad mouth the supplied cables, OMG you are getting a good Amp., a Dual 10" Vented Box with Sub-Woofers, I did use the RCA Cables, I put my Meter on them, they put out a good signal. Besides I can use the other cables for something else. So if you are looking for good Bass and don't want to spend a lot of money, this system really hits hard, don't forget the remote adjust, I really recommend this System, you will not be disappointed!

0 of 0 found this helpful

Help our customers find the most helpful reviews

NewtoBass

Akron,New York

Overall
Durability
Value
Features
Design
Usability
More than I imagined.

December 26, 2010

Now I just installed these in my car earlier today. I was really looking for something cheap simply to replace the stock subwoofers in my car. After they were in the car I was expecting all that much, needless to say everything around me was shaking to hell. The seats were rumbling excessively. Great Value, Only thing I can say is the wiring kit isn't that amazing. Second, wire the power through your fuse box. It's alot easier with the cable this set comes with. Inline Fuse is a requirement too that this does not come with.

0 of 0 found this helpful

Help our customers find the most helpful reviews

jonathon

jayton, texas

Overall
Durability
Value
Features
Design
Usability
great subs

December 8, 2010

This system is an amazing buy. It bumps so loud to be so cheap. The only problem with it is like someone else said, the ports are kinda crappy. I plugged them up with some t shirts and it sounds WAY better as a sealed box. i have never had a problem with the subs cutting out or overheating, the amp gets warm but never hot. i have it in my 1998 dodge ram 2500. it has a straight pipe exhaust system and it is LOUD. most of the time people around me have no problem hearing my system. I cant express how amazed by the price and value of these subs and amp. I would recommend to anybody looking for a good cheap system. I did use a way better amp kit, didn't trust the one it came with, but the power wire works great for good speaker wire.

0 of 0 found this helpful

Help our customers find the most helpful reviews

James

Highlands Ranch, CO

Overall
Durability
Value
Features
Design
Usability
Bumpin'

November 21, 2010

I was skeptical about these subs because they were so cheap, yet had good reviews. I have a 2001 Jetta Sedan, so I threw them in the trunk and mounted the amp to the back of it. Let me say so far the amp is great, the subs are good too, but when you turn the bass boost all the way up, it is distorted but only if you open the trunk while they are playing, but they sound great in the car. I had it done by a professional audio guy that said they are great quality, although the amp kit was crap, he charged me 30 bucks for a replacement one, and I recommend anyone doing it do the same. I have a sedan as previously stated and my friend has a SUV with 2 12's. Mine sound as good as his, I asked my guy about it and he said that 2 10's are better for a sedan because there is less air to push and the bass waves don't have far to travel, so 2 10's in a Sedan are the same as 2 12's for a SUV/Hatchback. Also with 10's, you just hear bass and bump, you cant hear the huge thump from the trunk with 12's. Not to mention the enclosure isn't that big so you can still use your trunk. The bass in this car rumbles the license plate, and definitely impresses the friends and overall just sound awesome. I wanted something that would sound good, and also turn some heads; with this, I got both.

2 of 4 found this helpful

Help our customers find the most helpful reviews

Gorrila Zoe

Crawfordville, Florida

Overall
Durability
Value
Features
Design
Usability
Awesome Bass

October 23, 2010

Ok this is my first system that I have hooked up but it has been amazing thanks to these subs. I put a new radio in my truck and was looking for some thing to make it bump and boy did this set up work. Some of my friends cant even ride bc of the bass and it can make your vision blurry if you turn it up. Who ever blew these where complete dumb s****.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

V210BS

Weight

40.00lbs

Internal SKU

v210bs

Internal Product ID

23639

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Visonik V210BS