Name: Precision Power PPI S420.2
Brand: Precision Power
SKU: s4202
Price: 69.00 USD
Availability: Discontinued
Rating: 4.0000 (3 reviews)

Shop all Precision Power

by Precision Power

About
Similar Products
Specs & Details
Product Videos
Reviews
Add-ons
Recently Viewed
Related Searches

Precision Power PPI S420.2 Image 1 — Precision Power PPI S420.2

Precision Power PPI S420.2 Image 2 — Precision Power PPI S420.2

Precision Power PPI S420.2 Image 3 — Precision Power PPI S420.2

Precision Power PPI S420.2 Image 4 — Precision Power PPI S420.2

Precision Power PPI S420.2 Image 5 — Precision Power PPI S420.2

Precision Power PPI S420.2 Image 6 — Precision Power PPI S420.2

Precision Power PPI S420.2 Image 7 — Precision Power PPI S420.2

Precision Power PPI S420.2 Image 8 — Precision Power PPI S420.2

Precision Power PPI S420.2 Image 9 — Precision Power PPI S420.2

Product videos

Product highlights

• 70W x 2-Chan. @ 4 Ohm
• 100W x 2-Chan. @ 2 Ohm
• MOSFET Power Supply
• Variable Bass Boost
• Brushed Aluminum Finish
• Platinum 4 AWG Power Block
• Remote Gain Control Included

Learn more about the s4202

Product Highlights

• 70W x 2-Chan. @ 4 Ohm
• 100W x 2-Chan. @ 2 Ohm
• MOSFET Power Supply
• Variable Bass Boost
• Brushed Aluminum Finish
• Platinum 4 AWG Power Block
• Remote Gain Control Included

Description

Authorized dealer

Sedona Series 2-Channel Class A/B Car Amplifier
RMS Power Rating:
- 4 ohm: 130 watts x 2 chan.
- 2 ohm: 210 watts x 2 chan.
- Bridged, 4 ohm: 420 watts x 1 chan.
PWM MOSFET power supply
Variable Bass Boost (0, 6, 12 dB at 50 Hz)
IDI Intelligent Distress Indicator for thermal, short, and impedance protection
Dash mount remote gain control included
Brushed aluminum finish
Platinum 4 AWG power block
Infinitely variable crossovers with multipliers (high/low/band)
Turn on/off delay
Tri Mode capable
High and low inputs
Variable high-pass filter (15-3800 Hz, 12 dB/octave)
Variable low-pass filter (50-4000 Hz, 12 dB/octave)
Subsonic Filter (35 Hz)
Frequency response: 10-39,000 Hz
Stereo separation: 55dB
Signal-to-noise ratio: 106dB
Damping factor: 281
Total harmonic distortion: 0.03%
Input sensitivity: 0.2V-6V
Fuse: 25A x 2
Dimensions: 15-1/3L x 9-1/2W x 2-1/3H
8-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
1-year Manufacturer's warranty

Specifications & Details

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

130 watts x 2 channel

RMS Power @ 2 ohms

210 watts x 2 channel

Bridged RMS Power

420 watts x 1 channel

Amplifier Specifications

Series

Sedona Series

Amplifier Class

A/B

Number of Channels

2-Channel

Total RMS Power Output

420 watts

Maximum Input Gauge Size

4 AWG

Minimum Impedance Unbridged

2 ohm

Minimum Impedance Bridged

4 ohms

THD at Rated RMS Power

0.03%

Speaker Level Inputs

Yes

Preamp Outputs

Built-in Crossover

Low-Pass (LP)
High-Pass (HP)

High-Pass Crossover Frequency

15 - 3800 Hz

Low-Pass Crossover Frequency

50 - 4000 Hz

Subsonic Filter

0 - 35 Hz

Signal-to-Noise Ratio

106 dB

Channel Separation

55 dB

Bass Boost

45Hz @ 12dB

Remote bass/level controller

Yes

Fuse Rating

25A x 2

Warranty and Return Policy

Parts Warranty Duration

1 year

Labor Warranty Duration

1 year

Warranty Provider

Manufacturer

Customer Ratings & Reviews

Precision Power PPI S420.2 thumbnail image

Overall rating distribution

5 star		67%
4 star		0%
3 star		0%
2 star		33%
1 star		0%

Filter by Star Rating

Show only Verified Purchases

By feature average rating

Durability		3.7
Value		5
Features		4.7
Design		3.7
Usability		4

Customer Reviews

Sort by:

Nice features, rated power, but gets too hot

This is a nice amp with great features that puts out rated power (tested with a multimeter and oscilloscope). You would be hard-pressed to find similar features at this power class and price point. Unfortunately, there is a reason: this thing gets too hot! Bridged @ 4-ohms for 420W RMS (which it actually does), this amp goes into protection mode after about 30 minutes of heavy use. At low volume or with cool air (A/C from the cabin) flowing across it, it is fine, but in the trunk mounted to the back seat (where most subwoofer amps would go) it overheats and shuts off. I added a couple 120mm fans to help alleviate this, and while it does help, it still shuts off occasionally when it is 100+ degrees outside. For this reason alone, I can not recommend this amp unless you can mount it inside the cabin with some airflow across the heatsink. Once this gets fixed, PPI will have a definite price:performance winner.

For any naysayers, yes, the appropriate sized cable was used (4AWG) with good bare-metal grounds (checked with a DMM), the gains were set correctly using an oscilloscope, and it was not stuffed in a space with no ventilation. There is absolutely nothing wrong with the install (not my first rodeo), it is the amp itself.

By C-squared on July 16, 2012

8 found this helpful

Report abuse

good quility amp no made up max power numbers

With all the "1000w max" or whatever amps on here people probly pass this one up seeing 420w but this amp is bigger and heavier then alot of these off brand 2000w whatever amps on here. This amp probly actually puts out steady what it says maybe more, not some amp that made 3000 watts @ 20v for one second before it was destroyed in a testing facility.

Have it pushing one orion xtr 12 dual 2 ohm sub in my friends lancer and its obnoxious. Easily mistaken for two decent 12s.

Low pass filter settings dont make much sence compared to most amps so i have it 3 stars for ease of use. also im not a fan of these style terminals for power wire, but they do hold secure.

By c ballz on February 19, 2012

8 found this helpful

Report abuse

Great value & power for the $$$

Bought this amp for 2 kicker comps and it's more then enough. I know it's not a Dclass amp but I got it bridged to 2ohms pushing between 600-800watts with the gain just over 1/2 way up & the remote gain control is great. I highly recommend this amp for anyone who wants some good bass for their $$$ unless u r running more then 2-3 speakers or going for competition level bass, this is all u need. PPI still has that real power.

By SeanOg1leg on October 7, 2016

2 found this helpful

Report abuse

Add-ons

Belva BAK42

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

(169)

$34.99

List price $59.99

Subscribe

Welcome to the Team!

Precision Power PPI S420.2

We apologize

This item has been discontinued

Product Highlights

Description

Specifications & Details

Item Details

Product and How-to Videos

Customer Ratings & Reviews

Customer Reviews

Related Searches

Didn't find your car?

Account

Shopping help

Company

Everyday heroes

Brand stores

Useful links