Name: Power Acoustik CPT1-3200D
Brand: Power Acoustik
SKU: cpt13200d
Price: 112.95 USD
Availability: Discontinued
Rating: 4.2500 (8 reviews)

Shop all Power Acoustik

by Power Acoustik

About
Similar Products
Specs & Details
Product Videos
Reviews
Add-ons
Related Searches

Power Acoustik CPT1-3200D Image 1 — Power Acoustik CPT1-3200D

Power Acoustik CPT1-3200D Image 2 — Power Acoustik CPT1-3200D

Power Acoustik CPT1-3200D Image 3 — Power Acoustik CPT1-3200D

Power Acoustik CPT1-3200D Image 4 — Power Acoustik CPT1-3200D

Power Acoustik CPT1-3200D Image 5 — Power Acoustik CPT1-3200D

Power Acoustik CPT1-3200D Image 6 — Power Acoustik CPT1-3200D

Power Acoustik CPT1-3200D Image 7 — Power Acoustik CPT1-3200D

Power Acoustik CPT1-3200D Image 8 — Power Acoustik CPT1-3200D

Power Acoustik CPT1-3200D Image 9 — Power Acoustik CPT1-3200D

Product videos

Product highlights

• RMS: 1000W x 1 @ 4 ohm, 1400W x 1 @ 2 ohm, 1800W x 1 chan @ 1 ohm
• Total Peak Power: 3200W
• Class D Circuitry
• Bass Boost: 0-12 dB at 45 Hz
• 1 Pair of Preamp Outputs
• Dimensions: 13"L x 9-13/16"W x 2-5/16"H

Learn more about the cpt13200d

Product Highlights

Description

Authorized dealer

CRYPT Series Class D Monoblock Amplifier
RMS Power Rating:
- 4 ohm: 1000 watts x 1 chan.
- 2 ohm: 1400 watts x 1 chan.
- 1 ohm: 1800 watts x 1 chan.
Max power output: 3200 watts
Pulse Width Modulated power supply
MOSFET PSU Transistors
Wired remote bass level control included
LED power (green) and protect (red) indicators
Selectable bass boost (6, 12 dB at 45 Hz)
Soft Start Turn-on
Mono channel operation
Preamp RCA outputs to daisy chain multiple amps
3-Way System Protection circuitry (thermal, overload, and speaker short protection)
Heavy duty extruded aluminum chassis heatsink for maximum heat dissipation
Black textured finish with silver trim and cast metal badge
Nickel-plated RCA level inputs
Nickel-plated screw terminals
Input sensitivity:
- Level: 200mV-8V
Variable low-pass filter (50-250 Hz, 12 dB/octave)
Subsonic filter (20-50 Hz)
Phase Shift: 0-180 Degrees
Frequency response: 15-150 Hz
Dimensions: 13"L x 9-13/16"W x 2-5/16"H
2-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
Authorized Internet Dealer
1-year Manufacturer's warranty

Specifications & Details

Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms

1000 watts x 1 channel

RMS Power @ 2 ohms

1400 watts x 1 channel

RMS Power @ 1 ohm

1800 watts x 1 channel

Amplifier Specifications

Amplifier Class

Number of Channels

1 - Mono

Total Peak Power Output

3200 watts

Total RMS Power Output

1800 watts

Maximum Input Gauge Size

2 AWG

Minimum Impedance Unbridged

1 ohm

Minimum Impedance Bridged

Not Bridgeable

THD at Rated RMS Power

0.5%

Speaker Level Inputs

Preamp Outputs

1 pair

Built-in Crossover

Low-Pass (LP)

Low-Pass Crossover Frequency

50 - 250 Hz

Subsonic Filter

20 - 50 Hz

Signal-to-Noise Ratio

80 dB

Bass Boost

6, 12 dB

Remote bass/level controller

Yes

Warranty and Return Policy

Parts Warranty Duration

1 year

Labor Warranty Duration

1 year

Warranty Provider

Manufacturer

Customer Ratings & Reviews

Power Acoustik CPT1-3200D thumbnail image

Overall rating distribution

5 star		63%
4 star		0%
3 star		38%
2 star		0%
1 star		0%

Filter by Star Rating

Show only Verified Purchases

By feature average rating

Durability		3.8
Value		4.7
Features		4.4
Design		4.8
Usability		4.4

Customer Reviews

Sort by:

It was good, but now its not...

OK, bought this mono block amp to power two 12" DVC subs running 2000 watts RMS at 1 ohm I bought amp since at 1 ohm its RMS power was 1 ohm: 1800 watts x 1 chan. so I had it all hooked up and tuned and for a week it sounded great pushed my subs well and one day something in it must have shorted made my alternator bog down and made everything strobe before it would blow a fuse.. ( did ti with speakers disconnected also ) so it was not my error it is in for repair/ replacement hopefully it was just a fluke other wise this seems to be a pretty solid amp.

By Ken B on January 14, 2011

20 found this helpful

Report abuse

Not too happy

So i purchased this amp to power 2 kicker 10" L7's (600 watt rms 1200 watt max each) in a sealed enclosure. The subs are wired to 2 ohms and sound great. I clamped the amp at full volume and it was only pushing about 900 watts. No where near its advertised specs. To make matters worse, they sound distorted like crazy at anything above 600 watts. The remote gain control knob really is only sensative for the first half turn. The "12 o'clock" position is max.
Probably the worst part is that only after less than five minutes of play time, the bottom plate of the amp rattled loose and stripped the four tiny screws that were holding it on. I tried to re fasten it on using slightly larger screws and some locktite but that only held for like 3 hours. The amp is mounted to the back of the seat and not on the sub box (cause it should never be)
For a cheap, good sounding amp running no more than 500 watts this is perfect.

By Matthew on November 20, 2011

18 found this helpful

Report abuse

Great Amp

I just bought this amp and paired it with 2 of the Power Acoustik P3w10 subs from Sonic with the fiberglass sealed box i made for my ranger and the amp powers the subs with ease. The amp is a very powerfull amp and has a great design on it too make the final touch to your set up

By Big B on October 29, 2010

18 found this helpful

Report abuse

power acoustic amp

Its a great amp one of the best amps I've ever owned I would buy another.

By tim on August 23, 2011

17 found this helpful

Report abuse

Bang for your buck

I'm running 4 10" rockford fosgate p2s off this amp slams extremely hard

By Jarrod on September 17, 2013

15 found this helpful

Report abuse

amp

I've got my amp pushing 2 pioneer 3500 watt's. I cant even get a full song out of my amp with it kickin out. I think the amp get's to hot to fast. But pushe's good.

By chucky on August 8, 2011

16 found this helpful

Report abuse

Great Power for a Great Price

I have this amp powering 2 12" Power Acoustik Mofo-X subs. Personally I think the amp powers them wonderfully. I can not talk to anyone in the back seat. I cant even hear my car running (idk if thats a good thing or not) But for the price I am well satisfied.
I do like how the bass knob will turn off the output to the subs when turned to minimum. Makes it easy to cut out the bass.
I'm not too fond of the design on the amp, but I love how it works so I cant complain.

By Mikell on November 22, 2010

15 found this helpful

Report abuse

Power Acoustik CPT1-3200D

Just had this amp installed and so far so good.. Does not get hot to touch like my other ones did.

By THOMAS on October 5, 2010

14 found this helpful

Report abuse

Add-ons

Belva BAK02 1/0 Gauge Amp Wiring Kit

The perfect kit for your perfect amp!

(75)

$49.99

List price $69.99

Subscribe

Welcome to the Team!

Power Acoustik CPT1-3200D

We apologize

This item has been discontinued

Product Highlights

Description

Specifications & Details

Item Details

Product and How-to Videos

Customer Ratings & Reviews

Customer Reviews

Related Searches

Didn't find your car?

Account

Shopping help

Company

Everyday heroes

Brand stores

Useful links