Expert Service 1-877-289-7664 [Hours]

RE Audio SRX10D4

300W 10" SRX Series Dual 4 ohm Subwoofer

In Stock
|

List price $324.98

$99.99

with warranty

You Save: $224.99 (69.23%)

Arrives by Monday, Sept. 1 to zip 20147

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Mon, Sept. 1

Get FAST answers from customers ASK a Question See questions answers

Bundled Savings with this Product

=

10% Off on the Subwoofer Box!

Save 10% off a 10" sealed subwoofer enclosure with your purchase!

3.50

27305

504

RE Audio SRX10D4

$99.99

+

10% OFF

Single 10" Sealed MDF Subwoofer Enclosure (Belva MDFS10)

$34.99

Special Price $31.49 ($34.99 if purchased separately)

Single 10" Sealed MDF Subwoofer Enclosure (Belva MDFS10)

• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals

(Offer 1 of 1)

Combined Total Price

$131.48

You Save $3.50

Monster Performance

Get big bass with the RE Audio SRX series of car subwoofers.! Easily expect monster performance and deep bass from these quality drivers. The SRX series has twice the power handling and improved audio output over the RE Audio REX series. The striking cosmetics complete the look of the subwoofer, while ensuring that high quality sound is produced. Once mounted, the kraft pulp cone and rubber surround will be visible for all to see. Underneath the cone is a 4-layer copper voice coil, a FEA optimized motor structure, double stacked magnets that all work together to keep the subwoofer linear and sounding great. The RMS of the SRX series is an affordable 300 watts and is perfect for those just starting their car audio system or the long time car audio enthusiast. Like all of the RE Audio subwoofers, they are capable of accepting much more power then the recommended RMS. For excellent performance for a great price, check out the RE Audio SRX car subwoofers

Subwoofer Features:
  • 10" Dual 4 ohm SRX Series Subwoofer
  • Power Handling:
    • RMS: 300 watts
  • Impedance: Dual 4 ohm
  • Kraft pulp woofer cone
  • Rubber surround
  • Pressed steel basket
  • FEA optimized motor structure
  • Linear spiders
  • Foam gasket
  • 4-Layer copper voice coil
  • Double stacked magnets
  • Also available in dual 2 ohm: RE Audio SRX10D2
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
SRX 10" T/S Parameters:
  • Electrical Q Value (Qes): 0.39
  • Mechanical Q Value (Qms): 5.5
  • Total Speaker Q Value (Qts): 0.36
  • Free Air Resonance (Fs): 25.3 Hz
  • Equivalent Compliance (Vas): 31 liters
  • One-Way, Linear Excursion (Xmax): 18 mm
  • Efficiency (SPL 1W/1m): 85.3 dB SPL
  • Effective Piston Area (Sd): 310 cm^2
  • DC Resistance (Re): 1.8 ohm
  • Nominal Impedance (Znom): Dual 4 ohm
  • Thermal Power Handling (Pe): 300 W
  • Force Factor (Bl): 14.35

For more information on the Thiele and Small Parameters, visit our T/S Parameters Article

Product History:

RE Audio SCXv2-10d4 thumbnail
(newest, current model)
RE Audio SRX10D4 thumbnail
(previous model, replaced by RE Audio SCXv2-10d4)

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
SRX (RE Audio)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
300 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
85.3 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
18 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Kraft Pulp
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Double Stacked
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed
Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.35 cubic feet
Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.5 cubic feet
Minimum Ported Box Volume
This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.65 cubic feet
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Ported Box Volume
This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.0 cubic feet
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
6"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
9-3/16"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
25.3 Hz
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
31 liters
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
0.36
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 10.
0.39
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
1.8 ohms
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 10.
5.5
Efficiency Bandwidth Product (EBP)
This number represents the trade off between having an efficient woofer and one with a wide bandwidth. To calculate this number, take the Fs and divide it by the Qes. If the number is below 50, the woofer is designed for a sealed enclosure only. If it's between 50-100 it can be used in either. Lastly, if it's greater than 100 it's designed for vented enclosures.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
84%
4 Star
11%
3 Star
5%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.7
Value
4.8
Features
4.7
Design
4.6
Usability
4.8

Greg

Orlando, FL

Overall
Durability
Value
Features
Design
Usability

--Would NOT recommend for a sealed enclosure--

April 21, 2014

I purchased this sub with the sealed box combo offered here. I've read that the manufacturer used to not recommend this sub in a sealed box, but that no longer seemed to be the case. I'm leaving neutral stars as I cannot comment on ported enclosures and these subs may be great there. Out of the box, the dust cover was not centered particularly well, but everything else looked fine. I used this sub for about a month before switching to a JL 12W3v3-2. The RE SRX10 D4 had no acceptable low end in the sealed box and didn't sound musical at all (it was also easy to locate the sub and the separation was often irritating). The JL was a night and day difference. I was hoping I could save some money with this brand as the reviews were all great. Again, this may be fine in a ported box, but that isn't what I wanted. Each sub was powered at 2 ohms (300 watts) off a JL XD700/5 in the same location of the vehicle.

1 of 1 found this helpful

Help our customers find the most helpful reviews

Jay

Silver city NM

Overall
Durability
Value
Features
Design
Usability

RE is the way to go

March 28, 2012

I got one of these n a ported 1.9 box that I also got from here and it hits hard deep and clean the box I have is perfect for the SRX, SEX, and the SXX they have great sound qualty I would take this sub over most 300 watt rms subs n if ur thinkin of gettin a type r or a w7 DONT get a SE-X its way better and will handle more than its rated and is a heck of alot cheaper than a JL W7.

1 of 1 found this helpful

Help our customers find the most helpful reviews

rogggg1020

kingsport, tn

Overall
Durability
Value
Features
Design
Usability

great pick for my use

April 12, 2011

i went from kicker comp i have had for 3 years now and got 2 of these in a 2.66 cu ft ported with 2 4"round ports @ 30hz and my windshield flexes 1/2 in with these i currently have 240 rms going to each and i had it checked out and im hitting 139 db in the corners of my dash re audio recomended that enclosure size to my tuning i was very surprised on how well these subs performed, major improvement from what i was running, cant wait till i get the right amps for the subs and the 5x7 re audio 2 ways then redo my whole system design

1 of 1 found this helpful

Help our customers find the most helpful reviews

ray

fresno, CA

Overall
Durability
Value
Features
Design
Usability

A lot of sub for a little dough.

May 4, 2014

I purchased this kind of skeptical of RE since they went Chinese, but for the money I am very impressed. Sub is in a much too small sealed box in the back of my extended cab colorado and this sub can make your liver quiver. I have it running of an early 90's pioneer 760 watt amp turned to a quarter gain and I still must run it at negative 2 on my deck. Overall love it, however when it arrived it had 2 large scuffs in the surround that I am not very happy with. Hopefully it doesn't rip

0 of 0 found this helpful

Help our customers find the most helpful reviews

Juan

Brownsville, TX

Overall
Durability
Value
Features
Design
Usability

MUY BUEN BAJO MEJOR QUE JL AUDIO

April 10, 2014

MUY BUEN SONIDO SONIDO FUERTE Y DE BUENA CALIDAD LO USO CON UN AMPLIFICADOR ORION HCCA275G4 A 1 OHM Y ES FUERTE DE VERDAD

0 of 0 found this helpful

Help our customers find the most helpful reviews

Sal

Nyack, NY

Overall
Durability
Value
Features
Design
Usability

Great Sub

December 26, 2013

I've had this sub for a few months now and it is a big improvement from my last Kicker sub. The Kicker seemed to just make one boom sound and that was it. This sub hits all different freq and sounds very tight. The amp I am running is rated at 475 and this sub can handle all of it. I have a custom Zenclosure box for my 350Z and it is more than the recommended sealed volume. It still sounds great but I think I am going to put a block of wood in the box to cut down on the volume. All in all I am very pleased with this sub as it was a big improvement over the Kicker which was more money than this one.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Cletus Earl

Biloxi, MS

Overall
Durability
Value
Features
Design
Usability

RE Audio SRX10D4

November 2, 2013

I purchased 4 of these for my regular cab dodge truck. I have a Belva 5000 watt amp set to about 1600 watt rms pushing them and it's wired to 2 ohms. These subs handle it great. Hits hard and rattles my vision. Just what i was looking for.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Bryan

Parma, OH

Overall
Durability
Value
Features
Design
Usability

good speaker at a good price

September 17, 2013

i bought this speaker because i read good reviews. i had never heard of RE before so after buying and building a 1 cubic foot displaced box ported to 35hz i am very impressed with the sound quality.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Josh

Chandler, AZ

Overall
Durability
Value
Features
Design
Usability

Great sub for the money!

September 17, 2013

Apparently I am the only one running these in a small sealed box. I have them in a .45 cuft sealed wedge in my truck, and they sound great. Nice tight bass. A bigger box would help to hit lower better, but for the size box I haven't heard anything better.

0 of 0 found this helpful

Help our customers find the most helpful reviews

yo

Fargo nd

Overall
Durability
Value
Features
Design
Usability

re

August 22, 2013

Out of all your options this will sound the best. "Well rounded" boom ya know?

0 of 0 found this helpful

Help our customers find the most helpful reviews

Keebo

Nactown, TX

Overall
Durability
Value
Features
Design
Usability

great price

July 18, 2013

I bought one of these subs about 5 months ago and it is a great sub for under $100 bucks. I built a box 1.5 cubes to ~35hz in the console area in my truck and it sound excellent for its value. I'm pushing it with the re dts1000.1 (discontinued model) amp at 2 ohms, a bit overpowering but it takes it like a champ. I also got 2 sets of the re 5x7s for a complete re system in my f-150 and get excellent sound for flea market price. KEEP IT UP SONIC, you're the best.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Mia

Cayman Islands

Overall
Durability
Value
Features
Design
Usability

Awesom Sub

December 16, 2012

Very impressed! I have this sub in a 1.1cuft vented enclosure as per RE Audio specs and it hits hard and clean. From Spragga Benz to Paramore this sub does all music justice. I am an RE Audio convert for life now!

0 of 0 found this helpful

Help our customers find the most helpful reviews

tommy

cushing, OK

Overall
Durability
Value
Features
Design
Usability

Best yet

December 3, 2012

I bought 2 of these 10s and matched them with the Re audio dts1500.1 wired down to 1ohm in a custom center console box built by me, little over 2cu ft tuned to 32hz. Best system I have owned yet beats out any 12s I've owned or heard.

0 of 0 found this helpful

Help our customers find the most helpful reviews

PAO

Las Vegas NV

Overall
Durability
Value
Features
Design
Usability

RE Audio SRX 10D4

February 18, 2012

This thing slaps so hard i couldn't believe it. i have it in a .6cu ft box and filled it with poly-fil and its running off a alpine mrp-m650 it wired in parallel @ 2Ohm and its taking 600 watts nice and strong. this sub sound output is insane for a 10! You really feel this sub in your chest and this thing is heavy and looks well put together. If your thinking of getting this sub buy it right now here at Sonic! Fast shipping and nicely packed!!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

h0354y

Bothell, WA

Overall
Durability
Value
Features
Design
Usability

Great sub

January 9, 2012

I had 2 of this in the trunk of my toyota corolla in a Bassworx subwoofer box, and a 1,500 watt amp, and these are by far the best subs i have ever bought! Defiantly would recomend these.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Zack

The Dalles, OR

Overall
Durability
Value
Features
Design
Usability

Great sub

January 2, 2012

This is my first sub. After a year at 600 Watts RMS @ 1Ohm on a Jensen power 900, I decided to throw it even more power. It is now taking 800-1000 Watts RMS @ 1 Ohm on an RE DTS 1000.1, and handling it well with gain set pretty low. That's incredible power handling for the price. Don't hesitate if you're thinking about buying this sub.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Josh

Sheridan , WY

Overall
Durability
Value
Features
Design
Usability

good subs for an affordable price.

December 26, 2011

These are nice little subs for there price point. Sound great and really handle some power even though only rated at 300 rms.

0 of 0 found this helpful

Help our customers find the most helpful reviews

MR. HATCHBACK

EVERETT,WASH

Overall
Durability
Value
Features
Design
Usability

GREAT SUB !!!

July 8, 2011

I have a single 10" on 1500 watt mono and this sub pounds! Great quality,great price! Excellant job Sonic!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Pedro

bakersfield, CA

Overall
Durability
Value
Features
Design
Usability

Great sub!

May 5, 2011

RE makes great subs and with the price from Sonic Electronix you can't beat this sub!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

Single 10" Subwoofer Angled Truck or Hatchback Box Enclosure

CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil.

Your Price $34.99

Single 10" Sealed MDF Subwoofer Enclosure

10-inch Sealed Car Sub Box Made with 3/4" MDF and lined w/ Polyfil.

Your Price $34.99

Single 10" Ported Enclosure Custom Black Baffle

Durable 3/4" Medium Density Fiberboard (MDF) construction.

Your Price $54.99

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $44.95

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

Your Price $59.99

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $109.95

Stinger Sound Dampening Trunk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

Your Price $69.99

20 oz. Bag of Poly-Fil

Polyester fiber fiberfill adds better bass to your system.

Your Price $5.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $6.99

Spring Post Terminal Cup

Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

Your Price $3.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $3.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $79.99

4 Ft of 1/4" Thick Black Heat Shrink Tubing

Provides abrasion resistance and added protection for your cables.

Your Price $3.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $8.99

Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $13.99

10" Protective Waffle Subwoofer Grille

Keep your subwoofer looking amazing while keeping it safe.

Your Price $4.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

AutoSound 2000 CD-101

Low frequency test CD

Your Price $11.99

Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

Your Price $299.99

1 RE Audio SRX10D4 Subwoofer

Mono Amp

2 Channel Amp - Bridged

2 RE Audio SRX10D4 Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp - Bridged

3 RE Audio SRX10D4 Subwoofers

Mono Amp

4 Channel Amp

4 RE Audio SRX10D4 Subwoofers

Mono Amp

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp

Items we think you might want

SRX10D2 thumbnail

RE Audio SRX10D2

• RMS Power: 300W
• Dual 2 Ohm
• Kraft Pulp Cone
• Rubber Surround
• FEA Optimized Motor Structure
• 4-Layer Voice Coil
• Double Stacked Magnet

Your Price $89.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

SRX10D4

UPC

611892991118

Weight

16.50lbs

Internal SKU

srx10d4

Internal Product ID

27305

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: RE Audio SRX10D4

  • RE Audio 12" SRX Bass Demo
  • RE Audio SRX Series Subwoofers
  • Subwoofer Size Buying Guide