Expert Service 1-877-289-7664 [Hours]

Boom. SUBTEMBER is here!

Shure BETA 27

Supercardioid Side-Address Condenser Microphone for Instrument and Vocal Applications

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Shure BETA 27 Side Address Microphone

The Beta 27 side-address condenser microphone is precision engineered for professional sound reinforcement and project studio recording applications. Its flat frequency response and low self-noise provide unerring performance in demanding environments. A tight supercardioid pattern ensures high gain-before-feedback and maximum isolation from other sound sources.

Product Features
  • Supercardioid Side-Address Condenser Microphone
  • For instrument and vocal applications
  • Supercardioid polar pattern specifically targets the sound source consistently with greatly minimized bleed from off-axis sound sources
  • Tailored for superior transient response from a low-mass, 1 externally-biased, ultra-thin 24 Karat gold-layered Mylar diaphragm
  • Flat, neutral frequency response for natural reproduction on stage or in the studio
  • 3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended lowend
  • -15 dB switchable attenuator handles extremely high SPLs with ease
  • Premium electronic components and gold-plated internal and external connectors
  • Internal pop filter with three separate mesh layers reduces wind and breath noise
  • Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
  • Impedance: 160 ohm
  • Sensitivity: 94 dB
  • Signal-to-Noise Ratio: 85.5 dB
  • Dynamic range: 131.5 dB
  • Common Mode Rejection: >50 dB
  • 1-year Manufacturer's warranty

Microphone Specifications

Microphone Type
This is the type of microphone included with the purchase of the item.

Wireless:All of these microphones can be used without the necessity of wires or cables to connect them. They usually come with a receiver that connects to the input device where the audio signal is being sent.

Shotgun: These microphones are suspended on a boom and are used primarily in video production and broadcasting.

Lavaliere: These microphones are clipped on to the lapel or tie of the talent for broadcast and video production audio.

Table Top: These microphones are designed with a built in stand or to be placed on a table top stand to be used for broadcasting and podcasting applications.

Headset: These microphones are to be worn on the head typically for live performance and theater production.

Handheld: These microphones are held in the hand and are used in a wide range of applications primarily vocals and public address.

Clamp On: These microphones attach directly on to an instrument.

Drum Package: These microphones are an all in one package for drums typically made of dynamic Kick, Snare, Tom, and a stereo condenser pair of overhead mics for Cymbals.

Studio
Designed Applications
The intended application the microphone is designed for.
Acoustic Guitar
Bass Amps
Drums
Guitar Amps
Vocals
Spoken Word
Instruments
Number of Microphones
This is the number of microphones that are included in the package.
1
Polar Patterns
The polar pattern of a microphone determines how sensitive it is to receiving sounds as they arrive at different angles.
Super-Cardioid
Transducer Type
The transducer type is the manner in which the audio signal is converted into an electrical signal.
Condenser
Address
The configuration of the capsule determining on which side the microphone is sung or spoken into.
Side
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 20,000 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
94 dB
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
85.5 dB
Output Impedance
This is the amount of impedance that the microphone allows.
160 ohms
Pad(s)
A pad is a term used for built in attenuation in a microphone or pro audio channel strip.
-15
Power Requirement
Condenser microphones require an external power source to operate. Typically a +48v DC charge commonly refereed to as Phantom Power.
+48v (Phantom)
Connection Type
This is the manner in which the microphone connects to the source unit. For wired microphones, this is the connector that directly connects the microphone to the mixer (or other input source unit). For wireless microphones, this is the connection that connects the microphones receiver to the mixer (or other input source unit).
XLR

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

Hosa MCL-125

25 ft. XLR Microphone Cable w/ Braided Shield

Your Price $13.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

BETA 27

UPC

042406180375

Weight

2.20lbs

Internal SKU

beta27

Internal Product ID

30750

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Shure BETA 27

  • USB Microphones | Recording Made Easy w/ USB Mics
  • Ribbon Microphones Explained | How They Work & When to Use