Expert Service 1-877-289-7664 [Hours]

Kicker DS12L72 (11DS12L72)

2 ohm: Dual 12" Vented Sub Enclosure with 2 Solo-Baric L7 S12L7 Subwoofers (DS12L7-2)

In Stock
|

List price $899.95

$879.95

with warranty

You Save: $20.00 (2.22%)

Arrives by Monday, Sept. 1 to zip 20147

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Mon, Sept. 1

Get FAST answers from customers ASK a Question See questions answers

Bundled Savings with this Product

=

25% off an NVX Sound Damping Trunk Kit with Purchase!

With purchase of any NVX subwoofer, you can save 25% on an NVX trunk kit that contains 20 sq. ft. of quality sound dampening material. This material quiets vibrations, stops rattles, and increases the subwoofer SPL.

15.00

31841

4

Kicker DS12L72 (11DS12L72)

$879.95

+

25% OFF

NVX SDTK20

$59.99

Special Price $44.99 ($59.99 if purchased separately)

NVX SDTK20

• Eliminates Road Noise
• Quiets Vibrations
• Stops Rattles • Increases SPL
• Reduces Heat
• Simple To Install
• Easy To Form Aluminum
• Four Step Peel and Stick Installation
• Five 18" x 32" Pieces

(Offer 1 of 1)

Combined Total Price

$924.94

You Save $15.00

New Kicker Solo-Baric

This Kicker 11DS12L72 features two 12" Solo-Baric L7 subwoofers loaded in a vented enclosure. If you are looking for a subwoofer with enclosure made specifically to Kicker's specifications, than this is for you! You'll have the benefit of perfect airspace measurements, and the port is tuned to compliment the subwoofers premium bass response.

Subwoofer Features:

  • 12" Solo-Baric L7 Series Subwoofer
  • Power Handling:
    • Peak: 3000 watts total / 1500 watts each
    • RMS: 1500 watts total / 750 watts
  • Enclosure impedance: 2 ohms (Wired internally in series/parallel to final 2 ohm impedance)
  • Titanium deposit impregnated cone woofer with rolled outer edge
  • Santoprene rubber surround
  • Stamped steel basket
  • Vented 360° back bracing
  • Rear foam gasket
  • Spring loaded terminals
  • Heat reducing T-cut top plate
  • Cast aluminum basket
  • Solid pole piece
  • Poly-cotton semi-progressive spider
  • Heat-dispersing, solid pole piece
  • Spiralead™ tinsel leads
  • High-temperature dual 2 ohms voice coils
  • Frequency response: 20-100 Hz
  • Sensitivity: 89.9 dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty (subwoofers only)

Enclosure Features:

  • Dual 12" Vented Sub Enclosure
  • Carbon-fiber front panel
  • Solid wood box
  • Embroidered Kicker logo
  • Combo vent/terminal cup
  • Oversized port
  • Dimensions: 16-3/8"TD x 19-9/16"BD x 32-3/8"W x 16"H
2011 Kicker Authorized Online Dealer and eBay Seller

Product History:

Kicker 11DS12L72 thumbnail
(newest, current model)
Kicker 08DS12L72 thumbnail
(previous model, replaced by Kicker DS12L72 (11DS12L72))

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
12"
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
750 watts
Total RMS Power Handling
This is the total RMS power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total RMS power handling for all of the subs combined.

The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend giving your subwoofer(s) 75% - 90% of the recommended RMS rating.
1500 watts
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
1500 watts
Total Peak Power Handling
This is the Total Peak Power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total peak power handling for all of the subs combined.

Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements.
3000 watts
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Titanium Deposit Impregnated Cone w/ Rolled Outer Edge
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Santoprene Rubber
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
89.9 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 100 Hz

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Vented / Ported
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
2
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
Square/Rectangle
Height
The height of the item, measured from top to bottom, in inches.
16"
Width
The width of the item from left to right (side-to-side) measured in inches.
32-3/8"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
16-3/8"
Second Depth
The second depth is used only when the box is slanted or angled. This value is the top measurement and it is measured in inches.
19-9/16"
Wood Thickness
The thickness of the wood the enclosure is made of, measured in inches.
3/4"
Number of Terminals
The number of terminals the enclosure has. Each terminal represents 1 positive and 1 negative.
2
Terminal Type
Spring clip terminals work best with bare wire connections with small-gauge speaker wire, or pin-type connectors.

Binding post terminals are a sturdier, more versatile type of speaker terminal. Because binding post terminals are are threaded, you can tighten them down against the wire or connector for a tight, clean connection. The most popular style of binding post terminals is known as a "5-way binding post". This type can accept bare wire, or any of the common speaker wire connectors. Binding posts with the option to be used with banana clips are even more versatile

Spring posts are a hybrid of the two. Instead of using a thread and "screwing" them tight, they use a spring to allow the wire to fit and tighten against the terminal.

Spring posts
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Gray
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
Carpet

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
4.7
Features
4.8
Design
4.8
Usability
5.0

richl323

paramus, nj

Overall
Durability
Value
Features
Design
Usability

real power output

November 12, 2013

one of few subs able to handle consistent upper wattage output without coil overheating

0 of 0 found this helpful

Help our customers find the most helpful reviews

Marcus

Covington, GA

Overall
Durability
Value
Features
Design
Usability

Great Buy

August 1, 2012

its a great buy u will love the sound and quality of these subs so buy them

0 of 0 found this helpful

Help our customers find the most helpful reviews

thomas

redding, CA

Overall
Durability
Value
Features
Design
Usability

kicker L7

January 23, 2012

I love the sound of these subwoofers. They are a good bang for the buck!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Nic

Canyon, Texas

Overall
Durability
Value
Features
Design
Usability

AMAZING

January 18, 2012

I have this set up in my 95 2 Door tahoe on a zx.1500.1 on these. I've got the loudest system in my town and people can hear me across town or when im all the way down their street, and it sure does piss off all the teachers at school in the mornings.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Roscoe

Missouri

Overall
Durability
Value
Features
Design
Usability

Amazing.

May 29, 2011

If your like me and read every reveiw on the product before you buy it, I'm here to tell you these subs are amazing. I got lucky and got these cheaper than Sonic but I have 2 500watt RMS Kenwoods going to them right now and its loud enough that it hurts. lol. I got a Kicker ZX1000.1 coming in the mail now and I hope to go louder! BUY THESE.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Ford Man

Oklahoma

Overall
Durability
Value
Features
Design
Usability

L7's rock

May 22, 2011

First let me say I have not owned this Specific Setup, BUT I do own there single setup. The single L7 in the Kicker designed box. (You save 50 bucks upgrading from the single to this double) But let me say...my 1 L7 ROCKS MY SOCKS OFF!! Two of them would be awesome, double the power! (I don't notice any problems running 1 sub with no capacitor, but I would definitely recommend at least a 2 farad for this setup)

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX Speaker Wire (XWS1225)

25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

Your Price $39.99

NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

Your Price $59.99

NVX Sound Dampening Rubber Roller (SDRLR1)

Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Complete Car Stereo Tool Kit, Includes Voltage Test Light, Wire Stripper and More

Your Price $12.99

Browse 1 question and 2 answers
Hide answersShow all answers | Sort by
What amp should I get for a dual 12 inch solobaric l7 loaded enclosure?
A shopper on Aug 19, 2014
Best Answer: Hello,

A good one! We kid. This setup is asking for ~1500w RMS @ 2ohms. We always suggest going with a CEA Compliant Monoblock for such setups; here are a few options:

Good:
Hifonics X2200.1D
http://www.sonicelectronix.com/item_76261_Hifonics-X2200.1D.html

Better:
Kicker DXA1500.1
http://www.sonicelectronix.com/item_76187_Kicker-DXA1500.1-41DXA15001.html

Best:
NVX XPLD3K
http://www.sonicelectronix.com/item_78508_NVX-XPLD3K.html
Reply · Report · Customer SStaff on Aug 20, 2014
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

11DS12L72

UPC

713034055457

Weight

102.00lbs

Internal SKU

11ds12l72

Internal Product ID

31841

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Kicker DS12L72 (11DS12L72)