JBL AL7115

4000W 15" High Power Single Trapezoidal Subwoofer with Large Vent Area

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

A Cabinet A Day Keeps The Doctor Away

AL7115 is a high power, low frequency loudspeaker system comprised of one 380 mm (15 in) Differential Drive® low frequency driver in a front-loaded, vented configuration. The trapezoidal cabinet is fitted with M10 threaded suspension points.

AL7115 is part of JBL’s AE Application Engineered Series, a versatile family of loudspeakers for a wide variety of applications.

General Features:
  • 1 x 15" 2265H Differential Drive® Low-Frequency Driver
  • Large vent area for high output with low distortion
  • Arrays with various AE Series mid-high frequency and compact 2-way models (see AE Series Array Guide)
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
System Specifications:
  • Frequency Range (-10 dB): 40 Hz – 4.2 kHz
  • Frequency Response (±3 dB): 47 Hz – 3.0 kHz
  • Transducer Power Rating (AES)1: 1000 W (4000 W peak), 2 hrs
  • Long-Term System Power Rating2: 600 W (2400 W peak), 100 hrs
  • Maximum SPL3: 50 Hz –125 Hz: 127 dB-SPL cont avg (133 dB peak)
  • 125 Hz – 800 Hz: 126 dB-SPL cont avg (132 dB peak)
  • System Sensitivity (dB-SPL, 1W @ 1m)4: 50 Hz – 125 Hz: 97 dB
  • 125 Hz – 800 Hz: 97 dB
  • Nominal Impedance: 8 ohms
Transducer Specifications:
  • Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
Physical Specifications:
  • Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
  • Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
  • Finish: Black DuraFlex™ finish. White available upon request
  • Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing
  • Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through
  • Environmental Specifications: Mil-Std 810; IP-x3 per IEC529
  • Dimensions (H x W x D in 548 x 561 x 657 mm vertical cabinet orientation): (21.6 x 22.1 x 25.9 in)
  • Net Weight: 25.9 kg (57 lb)
  • Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.

Subwoofer Specifications

Power Configuration
PA Subwoofers can be active or passive. Active subwoofers have a built-in amplifier that is designed to power the subwoofer, Passive subwoofers require an external amplifier to power the subwoofer.
Passive
Number of Drivers
This is the total number of low-frequency drivers in the PA Subwoofer enclosure.
1
Driver Size
This is the size of the low-frequency driver(s) in the PA Subwoofer.
15"
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
40 - 4200 Hz
Maximum SPL (Sound Pressure Level)
This is the maximum Sound Pressure Level (SPL) of the PA Subwoofer. The higher the SPL rating, the louder the subwoofers are able to go.
133 dB
Inputs
These are the types of input connections that the PA Subwoofer has.
Binding Posts (Banana Clip Ready)
SpeakOn

Passive Subwoofer Specifications

Peak Power Handling
This is the maximum amount of power that the subwoofer is capable of handling. It is measured in watts.
4000 watts
Continuous Power Handling
This is the amount of continuous power that the subwoofer is capable of handling. It is measured in watts.
1000 watts
Impedance
This is the amount of resistance that the subwoofer presents to the amplifier. It is important to match the impedance of the subwoofer to the impedance of the power amplifier.
8 ohms

Case Specifications

Mounting Options
These are the different types of ways that the PA Subwoofer is able to be mounted. Most of these PA subwoofers are designed to be floor standing systems, however some of them can be mounted in other fashions.
Array Compatible
Floor Standing
Enclosure Material
This is the type of material that the PA Subwoofer is made out of.
Solid Plywood with Durable Finish
Grille
If the PA Subwoofer includes a grille, it will be indicated here.
Yes
Height
The height of the item, measured from top to bottom, in inches.
21-5/8"
Width
The width of the item from left to right (side-to-side) measured in inches.
22-1/8"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
26"
Weight (Pounds)
This is the weight of the item in pounds (lbs).
57 lbs

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

AL7115

Weight

57.00lbs

Internal SKU

al7115

Internal Product ID

32574

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: JBL AL7115