HFi Retro Style, Advanced Technologies
The HFi3000D complements any application for your subwoofers. Today’s high output subwoofers require only the finest, dedicated power to run loud and constantly in any vehicle. The HFi Monoblock series of amplifiers meets these expectations and will gladly get your system that extra bass you’re looking for.
Incorporating Class D circuitry to allow for dedicated, efficient power allows for higher bass response, and not sacrificing any sound pressure. Why neglect your subwoofer of the high power output it truly demands? The HFi Class D Monoblocks are affordable, extremely powerful, and designed with a pleasantly small chassis. This allows the high power output amplifiers to take up the least amount of space in any installation.
The included bass knob can allow you to adjust your bass to match any music type, and allows you to replicate your bass to compliment any genre type. Integrating the Pulse Width Modulated MOSFET power supply to allow for efficiency on your car battery allows this amplifier to put out impressive power without drawing too much from your car’s electrical system. Value is truly defined with HFi3000D – get yours today!
- HFi Series Single Channel Class D Car Amplifier
- RMS Power Rating:
- 4 ohms: 750 watts x 1 chan.
- 2 ohms: 1500 watts x 1 chan.
- 1 ohms: 3000 watts x 1 chan.
- Pulse Width Modulated (PWM) MOSFET power supply
- LED power (blue) and protect (red) indicators
- Wired HFR-3 remote bass level control included
- Variable Bass Boost (0 to +10 dB bass boost at 45 Hz)
- Blue illuminated Hifonics badge
- Soft start sound function
- Mono channel operation
- Preamp RCA outputs to daisy chain multiple amps
- 4-Way System Protection circuitry (thermal, overload, DC, and speaker short protection)
- Dual 12 gauge speaker terminals simplify hookup
- Heavy duty aluminum alloy vented heatsink for maximum heat dissipation
- Silver nickle-plated RCA level inputs
- Silver nickle-plated screw terminals
- Input sensitivity:
- Variable low-pass filter (30-250 Hz, 24 dB/octave)
- Subsonic filter (15-35 Hz)
- Damping factor: >200
- Frequency response: 15-250 Hz
- External 250A fuse required and sold separately
- Dimensions: 19-13/16"L x 8-13/16"W x 2-7/16"H
- 0-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
- Authorized Internet Dealer
- 1-year Manufacturer's warranty
|
Average Customer Rating is 4.7 out of 5 stars:
Share your thoughts with others:
|
|
Average Attributes Rating:
| Durability | | 4.7 |
| Value | | 4.5 |
| Features | | 4.8 |
| Design | | 4.8 |
| Usability | | 4.7 |
| what's this? |
|
|
Quick Comparison:
|
|
Most Helpful Customer Reviews:
|
Review by
Cody from Portage, WI
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
First off this amp looks way better in person. The pictures don't do it justice. Secondly, the amp doesn't get hot, PERIOD. Im running it at 2.6 ohms and i had music blasted (HEAVY BASS) for about 45 minutes. I felt the amp afterward and it was still cold. I really couldn't believe how well it performed with my dvc 10's and 15.
The bass knob is also very sturdy. Usually with lower end brands you get a bass knob thats plastic, and it only heightens bass when you turn it to the twelve o'clock position. The rest of the way it doesn't make a difference. With the Hifonics HFi3000D its not the case. Hardened metal along with a bass knob that adds bass however much you turn it. I had trouble turning the knob half way because the bass was overwhelming.
The amp is a little big but it's to be expected. I've owned lower end 5000 watt amps that are smaller than this. Overall this amp is well worth the money. If you want an amp that you'll be proud of because of its look and performance, this is it.
|
|
Review by
gotbass21 from ontario, Canada
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
OK for starters, i purchased 2 12" re audio sxx 12's and was considering throwing a Brutus 2400 on them but read bit more and found out they can handle way more then 1200 rms each so i looked on the site sonicelectronix.com found this amp compared it to the 2400 it was about 200 dollars cheaper and you get 600 rms more for the price its hands down a awesome deal BUY THIS AMP FOOL! I had one 12 in a custom home made box was hitting 139.8 db's at 2 ohms thats impressive and gain was about 5/8ths up so its got way more potential. hey who knows i might just buy another one and 2 more 12's bam.
|
|
Review by
Todd from Cols, Ohio, Zambia
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
This amp is good 4 some but if you call Hifonics the RMS is 2100 not 3000RMS. I own 2 HFi3000dD.
|
|
Review by
big jerry from ridecrest california
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I definatly liked the purchase. They will envy or hate no in between. That's a fact dont be scared.
|
|
Review by
jim from ca
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
This amp is great! BUT its power hungry for sure. I have it running at .5 ohms pushing my 15's which are at .5 ohms. I have 2 Kinetic hc1400 and my stock tahoe battery, and to power those i have a powermaster 200 amp alt and i still get drops from 14v to 12v. And yeh i have big three and the charging cable is 4/0 ofc!!! So yeah im not lacking on my wiring. If you have the power to back up this amp then get it because it is an awesome amp.
|
Customer Service
