Expert Service 1-877-289-7664 [Hours]

Massive Audio D 3600

3600W Max 1 Channel Monoblock D Block Series Car Amplifier

In Stock. Only 2 Left!
|

List price $819.95

$289.95

with warranty

You Save: $530.00 (64.64%)

Order within 19 hrs 25 mins to ship 7/14

Arrives by Thursday, July 17 to zip 07095

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock. Only 2 Left!

Arrives by Thu, July 17

Bundled Savings with this Product

=

25% off 0/1 Gauge Amp Kit with Select Amplifiers!

Save 25% off the Belva BAK02 install kit, you will need an amp kit to install your amp, and this is the perfect kit for this amp.

15.00

33275

488

Massive Audio D 3600

$289.95

+

25% OFF

Belva BAK02

$59.99

Special Price $44.99 ($59.99 if purchased separately)

Belva BAK02

• 1/0 Gauge Complete 2-Channel Amplifier Installation Kit
• ANL Fuse Holder With A 150 Amp ANL Fuse
• For Car Audio Systems Up To 1500 Watts RMS
• Premium Powerflex Power And Ground Wire
• Helical Twist Construction Audio Interconnect RCA Cables

(Offer 1 of 1)

Combined Total Price

$334.94

You Save $15.00

  • Massive Audio D 3600 Digital Block Series Mono Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 650 watts x 1 chan.
    • 2 ohms: 950 watts x 1 chan.
    • 1 ohm: 1800 watts x 1 chan.
  • Max power output: 3600 watts
  • MOSFET power supply with high grade switching devices
  • LED power/protect indicators
  • Brushed aluminum "finless" heat sink
  • Short circuit, thermal, reverse voltage, and over voltage protection
  • Linkable with single RCA for easy upgrade
  • N-channel circuity for high efficiency
  • Illuminated Log
  • Frequency response: 10-220Hz
  • THD (Total Harmonic Distortion): .2%/li>
  • Signal-to-Noise Ratio: >70 dB
  • Low pass variable crossovers 40-220Hz
  • Sub sonic filer: 10-50Hz
  • Bass boost frequency: 30-80Hz
  • Max Voltage: 15V
  • Overheat temperature protection: 80°C/176F
  • Max RCA Voltage: 5V
  • CEA-2006 compliant amplifier
  • Weight: 15 lbs
  • Dimensions: 14-13/16"L x 6-1/2"W x 2-1/8"H
  • 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • 1-year Sonic Electronix warranty

Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
650 watts x 1 channels
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
950 watts x 1 channels
RMS Power @ 1 ohm
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 1 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
1800 watts x 1 channels
Peak Power Output
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage. Often times this maximum is achieved during a brief musical burst, such as a drum accent or low bass hit. Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. This is the peak power output for the amplifier's 5th channel.
3600 watts x 1 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

1800 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

1800 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
1 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Not Bridgeable
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
.2%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
No
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

\
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

40 - 220 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
10 - 50 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
70 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 12 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Optional (Accessory required and sold separately)
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
150A x 1 
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.8
Value
5.0
Features
4.9
Design
4.9
Usability
4.5

fatz

kansas city missouri

Overall
Durability
Value
Features
Design
Usability

great buy

November 5, 2013

I brought the amp 4 months ago and I tell you this amp is wonderful true power for 289.99 I recommend this amp but to buy another one I have it hooked up to two powerbass 12" 3400 watts and it hits hard in my 1978 cadillac deville

1 of 1 found this helpful

Help our customers find the most helpful reviews

Nate

Eastern PA

Overall
Durability
Value
Features
Design
Usability

Great "little" amp!

October 21, 2013

This amp is beautiful and controls my Massive Hippo 12 with authority and poise. Other 5 Series BMW owners who claim that their sub cannot be heard through the rear seats and sheet metal dividing wall, need to go out and get a real sub. This amp is at less than 50% on the gain, at 1ohm, and barely gets warm... as it tears the trunk apart and pisses off neighbors in a 1 mile radius. (Get the big capacitor and check your voltage supply) Stupid sick little hunk of solid aluminum dressed up with a pretty blue light on top, that's the 3600 in a nutshell!

1 of 1 found this helpful

Help our customers find the most helpful reviews

tesman

N. Dartmouth MA.

Overall
Durability
Value
Features
Design
Usability

serious bang for the buck

December 20, 2013

this amp is by far the best i have owned. insane power for its size. i see no reason to not buy this amp, i am only running two 10s and i think i need more just to make this amp be happy. i see no bad reviews for this amp. if you want right on the money power, this is the amp!!!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

John

ATLANTA, GA

Overall
Durability
Value
Features
Design
Usability

VERY SOLID AMP

December 17, 2013

THIS AMP IS VERY SOLID AND IT PRODUCES SUPER STRONG CLEAN POWER... YOU WONT BE DISAPPOINTED...

0 of 0 found this helpful

Help our customers find the most helpful reviews

Kurt

Petersburg, VA

Overall
Durability
Value
Features
Design
Usability

LittleMonster! Great Amp

November 5, 2013

After using this amp to push 8 dual voice coil subwoofers, I was convinced that it could push pretty much anything I hooked up to it. So far, I’ve been right. From Tens and Twelves to multiple I still havent turned the gain up past half, but it still provides MORE than enough power for everything I’ve connected. AWESOME AMPLIFIER!!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Tim

Tucson, AZ

Overall
Durability
Value
Features
Design
Usability

Wow what a great amp for the money.

March 6, 2013

I've this amp for three months now. I was looking for an upgrade on an amp, so I looked at all types of amps and I came to this one and I really liked to the look of it. Well I looked up Massive and I found that there an off shoot of US amps and I was sold. I needed a better amp for my Sundowns. I looked at Hifonics amps and a lot were saying that the amps didn't put out very clean watts. The massive was more, but I went for it over the other brands. You will need an inline fuse at 150 for the amp, they don't tell you that. Pros: its Digital, SMD approved (if you don't know who SMD is look it up),the amp is tested many times before it goes out, clean look with a nice blue badge. Con: Mounting, its a pain, that's why I gave it a three on ease to use.

0 of 0 found this helpful

Help our customers find the most helpful reviews

2 LOUD FOR U

LAKE OZARK MO

Overall
Durability
Value
Features
Design
Usability

these amps are THE BEST

August 2, 2012

AWSOME POWER UNDER RATED EAT A 2500 DOLLAR ROCGOKFORD UP ALL MY BOYZ AT SONIC THANKS GUYS DOSENT COME WITH DBR KNOB ANOTHER 20 BUCKS MY L7s LOVE IT GOTTA FEED THEM

0 of 0 found this helpful

Help our customers find the most helpful reviews

Gman

Mi

Overall
Durability
Value
Features
Design
Usability

Small but powerful

May 28, 2012

This is got to be the best amp I've owed. It's physically really small but it pounds. Compared to the brutus 1700 I had before, it way cleaner, more efficient, and I think sounds much louder. Only issues I've had is maintaining correct voltage and setting the gain correctly. It is touchy and only goes up to 5 volt max input. This amp will protect itself at about all cost from what I have seen (over voltage, under voltage, ect.) All in all I love the amp and would recommend to anyone with serious bass needs and the car to handle it.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX XKIT42 100% OFC True 4 Gauge Wiring Kit with RCA Cables and Speaker Wire

The reviews speak for themselves, this is awesome wire with everything you need!

Your Price $89.99

Stinger SK4641 4 Gauge Wiring Kit

Get a high quality amp kit from Stinger to get the most from your new amp!

Your Price $64.99

Belva BAK42 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

Your Price $29.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $79.99

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

Get all you need including wire cutters to upgrade your power and ground wire.

Your Price $149.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $39.99

StreetWires FB0

1/0 Gauge Firewall Bushing

Your Price $6.95

NVX XDBU4 - Top of the Line!

Distribution Block with Two 1/0 or 4 AWG Inputs and Four 4 or 8 AWG Outputs

Your Price $17.99

Professional Installation for your Car Power Amplifier

Covers labor charges through our professional installer network.

Your Price $89.99

NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $11.99

NVX XIX25 X-Series RCA Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $26.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $13.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

Your Price $149.99

Scosche SPL Meter SPL1000F

Handheld boomSTICK measures your SPL range from 60 to 135 dB

Your Price $21.99

AutoSound 2000 CD-102

High Frequency Test CD specifically designed for the set-up and evaluation of sound system imaging and placement.

Your Price $11.99

AutoSound 2000 CD-104

Audiophile reference series test disc for evaluation of all audio components.

Your Price $11.99

XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

Your Price $12.99

Product Summary

Manufacturer

Model Number

D 3600

Weight

10.65lbs

Internal SKU

d3600

Internal Product ID

33275

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Massive Audio D 3600