Garage
Shop

JL Audio JX1000/1D

1000W RMS JX Series Monoblock Class D Subwoofer Amplifier

JL Audio
Shop all JL Audio
highlight-star-icon

• Peak: 500W x 1 @ 4 ohms, 750W x 1 @ 3 ohms, 1000W x 1 @ 2 ohms
• Unregulated PWM switching type power supply
• Class D Circuitry
• Bass Boost: 0-12 dB
• Speaker-level (high-level) inputs with included harness
• Dimensions: 7.68"W x 10.94"L x 2.09"H

Learn more about the jx10001d

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

rd10001 thumbnail

JL Audio RD1000/1

OUR PRICE: $559.99

View item

Description


JL Audio brand icon

Authorized dealer

JL Audio JX1000/1D

JL Audio JX1000/1D - JX Series Monoblock Class D Subwoofer Amplifier

The JL Audio JX Series of amplifiers are designed with a specific purpose; to deliver clean, rock-solid performance and reliability at an affordable price. Unlike gimmicky price-conscious amplifiers, JL Audio employs specified oversized output transistors and rugged MOSFET power supplies to unsure proper current, thermal capacity and better overall performance. In addition, the JX1000/1D includes flexible signal processing capabilities with a fully variable 12 dB/octave crossover filter, pass-through preamp outputs and a Bass EQ. With the optional JL Audio RBC-1 Remote Level Control (sold separately), you can control the subwoofer volume from the front of the vehicle.

JX monoblock subwoofer amplifiers are specifically designed to drive subwoofers. Their frequency response is limited to the range below 150 Hz., making them unsuitable for driving midrange speakers or tweeters.

Integration Flexibility

Integration Flexibility

For those systems that do not offer a preamp level signal option, you can connect speaker level signals directly to the "Hi-Level Inputs" connector using the supplied connector and wire harness. Simply splice the appropriate left/right and positive/negative wires to the included harness and plug the harness into the "Hi-Level Inputs" connector on the amplifier. The JX monoblock will attenuate the high-level signal to make it compatible with its input stage. Alternatively, a traditional left/ right pair of RCA type jacks is used for preamp level (low-level) signals. This is the preferred connection method whenever available.

Low-Pass Active Filter

Low-Pass Active Filter

The JX monoblock features a 12 dB/octave low-pass active filter for its internal channel. This feature is designed to attenuate frequencies above its filter frequency, so that the system's subwoofer(s) do not reproduce any audible and often harmful mid-range frequencies. The low-pass filter is fully variable between 50 Hz and 200 Hz via the "Filter Frequency" control knob. 80 Hz is a good starting point for system tuning, but its also advisable to match the crossover point with that of your satellite speakers' high-pass filter - this ensures that your system is properly distributing the frequencies to the appropriate medium.




General Features:

  • JX Series Monoblock Class D Subwoofer Amplifier
  • RMS Power Rating (14.4V):
    • 4 ohms: 500 watts x 1 chan.
    • 3 ohms: 750 watts x 1 chan.
    • 2 ohms: 1000 watts x 1 chan.
  • RMS Power Rating (12.5V):
    • 4 ohms: 500 watts x 1 chan.
    • 3 ohms: 700 watts x 1 chan.
    • 2 ohms: 900 watts x 1 chan.
  • Unregulated PWM switching type power supply
  • LED power (green) and protect (red) indicators
  • Soft start turn-on prevent clicking and popping when system turns on
  • Speaker-level (high-level) inputs with included harness
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heatsink for effective heat dissipation
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Remote bass level input (JL Audio RBC-1 sold separately)
  • Input sensitivity:
    • Low level input: 200mV - 4V
    • High level input: 2.0mV - 10.0V
  • Variable Bass Boost: 0 to +12 dB bass boost centered at 45 Hz
  • Variable low-pass filter: 50 - 200 Hz, 12 dB/octave
  • Frequency Response: 20 - 150 Hz ± 1 dB
  • Total Harmonic Distortion (THD): 1%
  • Signal to Noise Ratio: >75 dB
  • Damping Factor @ 4 ohms: >1000 @ 4 ohms
  • Fuse Rating: 80A x 1 inline (not supplied)
  • 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
  • Weight: 7.0 lb
  • Dimensions: 7.68"W x 10.94"L x 2.09"H
  • Authorized Internet Dealer
  • 2 Year Manufacturer's Warranty
Check out the JL Audio JX1000/1D Owner's Manual

Product history:

JL Audio RD1000/1 thumbnail
(newest, current model)
JL Audio JX1000/1D thumbnail
(previous model, replaced by JL Audio RD1000/1)

This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.

Specifications & Details


Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
500 watts x 1 channel
RMS Power @ 2 ohms
1000 watts x 1 channel
Amplifier Specifications
Series
JX Series
Amplifier Class
D
Number of Channels
1 - Mono
Total RMS Power Output
1000 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
1%
Speaker Level Inputs
Yes - with included adapter
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
50 - 200 Hz
Signal-to-Noise Ratio
>75 dB
Bass Boost
0 - 12 dB
Remote bass/level controller
Optional (Accessory required and sold separately)
Fuse Rating
80A X 1 In-Line Fuse Recommended
Strappable
No
Sonic Certified Amplifier
Not Tested
Warranty and Return Policy
Parts Warranty Duration
2 years
Labor Warranty Duration
2 years
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

JX1000/1D

Weight:

7.81lbs

Internal SKU:

jx10001d

Internal Product ID:

33534

Customer Ratings & Reviews



5 star
88%
4 star
8%
3 star
4%
2 star
0%
1 star
0%



Durability
4.9
Value
4.8
Features
4.6
Design
4.9
Usability
4.9

Customer Reviews

Sort by:

Loading...

do u recommend to buy this amp

hey I have the same speakers as u 2 12w3v3 4 ohms does this amp give a good power to these speakers ?

By jose on September 5, 2012

72

found this helpful.

Great product

Excellent product, great customer service, running jl 12" 500rms sub, sounds great

By Loc on August 28, 2012

68

found this helpful.

Nice Buy

Very good sound. Very easy to use and install. Fast shipping. Added what i was looking for to my 2 JL 12 in. w3s.

By MyR on August 27, 2012

68

found this helpful.

Amazing amp from an amazing brand

I got this JL Audio JX1000/1D amp to replace my Kenwood KAC-9105D and I know the price is a little steep, but I know that this amp won't crap out on me like my Kenwood one did. I don't have any problems with the JL amp overheating or anything and it does exactly what it's supposed to.

By Alex on November 29, 2012

66

found this helpful.

Great Sub Maybe

I have never seen a bad review of this sub. I purchased this sub because of good reviews and the JL brand name. Nobody has mentioned a huge downside of this amp. There is no subsonic filter.

I am trying to put together a high end system and I am feeling uneasy about my purchase. I think I hear distortion because of subsonic noise. I would have chosen another option because this.

By JP on July 19, 2013

65

found this helpful.

Great amp

Had this amp for six months now. Runs cool to the touch with no issues and good power.

By Rob on March 14, 2012

64

found this helpful.

Plenty of Clean Power!

The JX1000/!D is another great JL Audio product that puts out plenty of clean power! The amp runs cool and continues to drive subs very well. With the price of the amp, the only addition to the amplifier that JL Audio should include is a RBC-1 control. That control would optimize all types of music!

By Shaboom on September 18, 2014

63

found this helpful.

Crazy Amount Of Power

I have 2 JL Audio 12W3v3 4 ohms(500 RMS a piece) hooked up to this amp. I have the gain all the way down, and have never touched the bass boost. My subwoofers flex extremely hard even with the gain all the way down, which is why I am scared to test the limits of my W3's with this amp by turning up the sensitivity. I have also hooked up my friends Alpine Type R to this amp and had to run to shut the music off because the sub could not nearly handle the power of this amp despite the amp being turned down so low. This amp is power hungry so make sure your subs can handle it!

By Jason on May 17, 2012

63

found this helpful.

nice amp

This amp can make any subs sound clean and bump hard. Pros are that it's really durable and it can get down and dirty and ive never had it over heat and shut off atfer hours of use. Cons, none.

By freddie on January 2, 2012

63

found this helpful.

great value!

For the price and the size of the amp u can't go wrong..its real small and it has a lot of power..i'll will give u clear and clean bass..I got 2 JL W5 flat spks on my 08 1500 Silverado crew cab and it sounds real good..

By boogie on March 10, 2011

62

found this helpful.

Add-ons


Similar Products

Best selling similar products

Alpine MRV-M500

• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier

(36)

$164.95

NVX VAD17001

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

(27)

$214.99

JL Audio JD1000/1

• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier

(2)

$399.99

Crunch GP-3500.1D

• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier

(6)

$99.99

Kicker CXA1800.1 (46CXA18001T)

• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier

(9)

$399.96

Related Searches


JX1000/1D small

Item added to your cart.

Price: $299.99

Essential add-ons
Belva BAK42BK

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
Belva BAK42BL

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
InstallBay AK4ANL

Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder

$49.99

$29.99

Add to cart
T-Spec V6-RAK4

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$44.00

$31.99

Add to cart
Cerwin-Vega CAK42

Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$99.99

$119.99

Add to cart
NVX XAPK4

4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire

$114.99

$84.99

Add to cart
Stinger SK4241

4 Gauge Power Amplifier Installation Kit

$129.00

$64.99

Add to cart
Stinger SK6241

4 Gauge Power Amplifier Installation Kit

$159.00

$79.99

Add to cart
JL Audio RBC-1

Remote Bass Knob for JL Audio Amplifiers

$54.99

$54.99

Add to cart
NVX Remote Level Bass Control with Digital Voltmeter

Controls bass level and frequency and monitor voltage

$99.99

$29.99

Add to cart
NVX XBRC

Universal Remote Level Bass Control

$9.99

$7.99

Add to cart
Universal Remote Bass Level Control Knob

Flush Mount & Universal via RCA. Works with any amp, controls your bass output

$14.99

$7.99

Add to cart
NVX XLCA2X

2-Channel Line Out Converter

$159.99

$79.99

Add to cart
NVX XLCA2

2 Channel Line Out Converter with xBOOST

$62.49

$49.99

Add to cart
NVX XBBR2

Looking to fine tune the bass in your vehicle? Look no further

$149.99

$69.99

Add to cart
The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

$149.00

$149.00

Add to cart
NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

$18.99

$12.99

Add to cart
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

$14.99

$6.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
Stinger SPP680

680 Amp SPP Series Dry Cell Battery with Protective Steel Case

$269.00

$173.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 150 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

$19.99

$12.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon