Garage
Shop

Cache CLOC+D

Line Output Converter & Line Driver

Cache
Shop all Cache
highlight-star-icon

• Line Output Converter
• Low output impedance
• High input impedance
• Line Driver
• Compatible with Either Factory or Aftermarket Systems
• Compatible with RCA or Speaker (High-Level) Inputs

Learn more about the clocd

We apologize

This item has been discontinued

Description


For many years installers have been faced with a problem. How do you effectively add an amplifier to drive a subwoofer or a pair of component speakers to a factory audio system while still giving the customer the kind of performance you would get by replacing the source unit? The cloc+d is the answer. The cloc+d is a high performance line output converter that features a high voltage (10 volts rms) output and an extremely low source impedance (30 ohms), usually found in only the most expensive aftermarket units.

The cloc+d has a signal sense feature that detects signal on the input and turns the unit on without the need of a 12-volt trigger at the remote in (turn on) connection. Whether you are using the remote in or the signal sense function the cloc+d has a remote out trigger that will turn on your amplifiers or other devices.

The cloc+d has another useful function. It is also a high voltage line driver. If you are using an aftermarket source unit that has a low voltage preamp the cloc+d will boost that voltage up to 10 volts rms of clean signal. And the cloc+d is small enough to fit just about anywhere.

Cache Product Features:
  • Line Output Converter for Installing Aftermarket Components in Factory Audio Systems
  • Includes a line driver for improved signal transfer
  • Compatible with either factory or aftermarket systems
  • Low output impedance
  • High input impedance
  • Flat frequency response
  • High output voltages
  • Excellent signal-to-noise ratio
  • Panel mount RCAs
  • Poly cap and low tolerance resistors in all signal path circuits
  • Power On LED
  • Removable terminal block for all input connections
  • Proudly designed and engineered in the USA
Specifications:
  • Maximum Input Voltage: 20 V
  • Maximum Output Voltage: 10 V
  • THD: 0.01 %
  • Input Impedance: >20,000 ohm
  • Output Impedance: 30 ohm
  • Signal to Noise (S/N): >87 dB
  • Signal Sense Level: DC sense
  • Dimensions: 3"L x 3-1/2"W x 1-1/8"H
  • 1-year Manufacturer's warranty

Best selling similar products

LD-10 small

PAC LD-10

• PAC LD-10 Line Driver with Signal Booster
• Boost Your Signal and Gain the Most Power Out of Your System
• 10X RCA Signal Booster
• Solid State Ground Loop Isolation
• Left and Right Gain Level Adjustment

(23)

$44.99

List price $89.00

MATRIX PLUS small

AudioControl MATRIX PLUS


• Active 6-Channel Line Driver
• Increase pre-amp signal levels up to 9.5 volts RMS
• Matches the volume levels between different sources
• Two channels of input can drive all six outputs
• Each output can drive up to seven amplifiers

(1)

$249.00

List price $339.00

CL-RLC small

JL Audio CL-RLC

• Fully Active, 2-Channel Remote Level Control and Line Driver with Pass-Through Outputs
• Minimizes Unwanted Noise
• Active Circuitry
• Control Knob
• Pass-Through Connection

(12)

$89.99

List price $89.99

Specifications & Details


Line Out Convertor Specifications
Number of Channels
2-Channel
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

CLOC+D

Weight:

3.00lbs

Internal SKU:

clocd

Internal Product ID:

33576

Customer Ratings & Reviews


Cache CLOC+D thumbnail image

5 star
80%
4 star
10%
3 star
10%
2 star
0%
1 star
0%



Durability
4.8
Value
4.6
Features
4.6
Design
4.7
Usability
4.9

Customer Reviews

Sort by:

Loading...

Nice

Bought this cuz it was on sale and wanted to mess around with my system (which is a 15 competition series sub from planet audio which for 1 sub is very loud) and see what i can improve for competition. First thing is i didnt get a ground wire in the box so i had to find my own. Second is that i only noticed a slight difference not too much maybe i just need to mess with the setting a little more though.

By Joe on March 14, 2012

30 found this helpful


lil beast

I got this to hook up my rockford sub amp to 1 infinity 12 in my magnum with the boston premium system. I hooked this in to power wires to the amp and used the remote out from it to turn the amp on. Taped in to the rear speakers accidently wired it out of phase but once i fixed that this little beast bumps and hits lows Shakes the whole car with only one 12". The Cloc+d is a must if you want to add an amp clean and powerful.

By 808Mag on October 8, 2011

31 found this helpful


A must have if you want to keep your stock radio

I think this is probably the best LOC I've ever used. IT's compact yet built tough. It was very easy to install and it was just as simple to set once everything was up and running.

I'm using this with my factory radio in my 2011 Hyundai Sonata (non-NAV) to a JL Audio 500/3.

By Robert on September 11, 2012

20 found this helpful


great product

Increased power output with clean and clear sound. Great product if you don't plan to change your stock head unit.

By charlie on April 8, 2012

20 found this helpful


cheap unit for big bass

I bought one of these and put it on 1 alpine 500 watt amplifier and 1 kicker cvr and it shakes the car now and sounds like i have 3 subs in it. its worth every penny.

By knight rider on August 14, 2011

20 found this helpful


Pretty good

Great price, this thing wasn't the greatest however it did great for how little it costed.

By Joe on September 7, 2012

18 found this helpful


not for SQ

I would not recommend this device for Sound Quality. Device is stable but have violation of harmonic.

By yagum on May 15, 2012

17 found this helpful


Great product

I love this product,it drives my sub amp! Boom Boom Boom....

By Big Matt's on February 18, 2013

17 found this helpful


cloc d

This product is wonderful. My headunit provides 3 sets of 4v preouts which really isn't bad, however, having a competition setup requires a bit more. I bought this because its small and easy to install. My voltage is more stable and my subs sound cleaner. My only complaint is how small the wire inserts are on the module. Other then that, great product.

By AudioVisual on October 13, 2011

15 found this helpful


Excellent product, works perfectly.

I used two of these to connect my new JVC head unit to the amps in my BMW M roadster. The Harmon Kardon amps needed a higher input voltage than the head unit could manage. These did the trick and work great.

By Todd on September 12, 2012

14 found this helpful



iRoc small

iRoc In-Dash Car Radio Stereo Controlled by iPhone 3G/3GS/4/4S

In-Dash Car Receiver controlled by iPhone w/ 3 Sets of RCA's, Navigation, SIRIUS/XM, Steering Wheel Controls

(5)

$249.99

List price $399.99

TC4004 small

MTX Audio TC4004

1200W Max, Thunder TC 4-Channel Amplifier

(4)

$129.99

List price $349.99

Related Searches


Save up to 10 different vehicles in your garage

Add vehicle
Loading...
Identify your vehicle and submodel details
  • Owner's manual
  • Vehicle's insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver's side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon

Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

  • You see only parts engineered for your exact vehicle
  • You avoid incompatible radios, speakers, or wiring
  • Installation is smoother, faster, and frustration-free
  • You get the correct accessories the first time

Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.