Expert Service 1-877-289-7664 [Hours]

Boston Acoustics G110PD

800W Peak GTuned Series Dual 10" High Performance Ported Loaded Subwoofer Enclosure

Discontinued
|

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Bundled Savings with this Product

=

25% off an NVX Sound Damping Trunk Kit with Purchase!

With purchase of any NVX subwoofer, you can save 25% on an NVX trunk kit that contains 20 sq. ft. of quality sound dampening material. This material quiets vibrations, stops rattles, and increases the subwoofer SPL.

15.00

36443

4

Boston Acoustics G110PD

$119.99

+

25% OFF

NVX SDTK20

$59.99

Special Price $44.99 ($59.99 if purchased separately)

NVX SDTK20

• Eliminates Road Noise
• Quiets Vibrations
• Stops Rattles • Increases SPL
• Reduces Heat
• Simple To Install
• Easy To Form Aluminum
• Four Step Peel and Stick Installation
• Five 18" x 32" Pieces

(Offer 1 of 1)

Combined Total Price

$164.98

You Save $15.00

Feel the bass with Boston Acoustics

If you are looking for a drop-in subwoofer solution, Boston Acoustic's GTuned Series Loaded Enclosures are the way to go. Available in single 10", 12" or dual 10", 12" models. These high quality MDF enclosures feature PowerVent tuning for optimum efficiency, impact and extension. Loaded with G1 car subwoofers that incorporate features like RadialVent cooling for increased power handling and SureSet impedance selection and protection. SureSet uses fuse protection to prevent damage from overdrive. For convenience the fuse protection has been moved from the subwoofer to the terminal cip for easier access. These loaded enclosures feature a GTuned port which uses an oversized port to reduce port turbulence giving you crisper, deeper and clearer bass. If you want a loaded enclosure that delivers quality and performance every single time, GTuned Loaded Enclosures are the way to go.

Subwoofer Features:
  • Dual 10" 2 Ohm GTuned Series Ported Loaded Car Subwoofer Enclosure
  • Power Handling:
    • Peak: 800 watts
    • RMS: 400 watts
  • Impedance: 2 Ohms (wired internally for final impedance)
  • PowerVent™ tuning for optimum efficiency, impact and extension
  • High quality MDF enclosure with glued and dado ends
  • Heavy-duty nickel plated input terminals accept up to 10 AWG wire
  • SureSet™ overdrive protection
  • High temperature 2" 4-layer voice coil
  • Radialvent® cooling, for increased power handling
  • Black and Gray two-tone automotive grade carpet
  • Q-Tune Setting: 35 Hz @ 0.9
  • Frequency Response: 36 Hz
  • Fuse Size: 7.5 Amp ATC
  • 1-year Manufacturer's warranty
Enclosure Features:
  • Dual 10" Loaded, Ported Enclosure
  • Over-sized port
  • Heavy duty nickle plated spring-loaded binding posts
  • Black and Gray two-tone automotive grade carpet
  • Dimensions: 12-1/8"TD x 15-1/8"BD x 33-1/8"W x 13-1/8"H

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
400 watts
Total RMS Power Handling
This is the total RMS power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total RMS power handling for all of the subs combined.

The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend giving your subwoofer(s) 75% - 90% of the recommended RMS rating.
400 watts
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
800 watts
Total Peak Power Handling
This is the Total Peak Power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total peak power handling for all of the subs combined.

Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements.
800 watts
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Not Specified
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Not Specified
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
34 Hz
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
Not Specified

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Vented / Ported
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
2
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
Hatchback Style, Angled Back
Height
The height of the item, measured from top to bottom, in inches.
13-1/8"
Width
The width of the item from left to right (side-to-side) measured in inches.
33-1/8"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
12-1/8"
Second Depth
The second depth is used only when the box is slanted or angled. This value is the top measurement and it is measured in inches.
15-1/8"
Number of Terminals
The number of terminals the enclosure has. Each terminal represents 1 positive and 1 negative.
1
Terminal Type
Spring clip terminals work best with bare wire connections with small-gauge speaker wire, or pin-type connectors.

Binding post terminals are a sturdier, more versatile type of speaker terminal. Because binding post terminals are are threaded, you can tighten them down against the wire or connector for a tight, clean connection. The most popular style of binding post terminals is known as a "5-way binding post". This type can accept bare wire, or any of the common speaker wire connectors. Binding posts with the option to be used with banana clips are even more versatile

Spring posts are a hybrid of the two. Instead of using a thread and "screwing" them tight, they use a spring to allow the wire to fit and tighten against the terminal.

Spring posts
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Two Tone Color
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
Carpet

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
5.0
Design
5.0
Usability
4.8

Jimbone

Southern, NH

Overall
Durability
Value
Features
Design
Usability

Great Speakers!

June 16, 2014

I've been a Boston Acoustics fan for a long time, owning home theater speakers for years and they have always treated well. When I was searching out subs for my car, I came across the G110PD. I purchased them mainly because of the name, they were 2 ohms and I read all the positive the reviews, oh yeah, you can't beat the price either! Well, all I have to say is these speakers kick serious a$$! I have a Kicker 5 channel amp and it's pushing 300 watts @ 2 ohms to these bad boys, they have a ridiculous amount of bass, I have 3 teen aged daughters and they constantly want me to cruise them around. They amazing good with any genre of music too. I highly recommend these speakers.

0 of 0 found this helpful

Help our customers find the most helpful reviews

ROBERT

Port Orange, FL

Overall
Durability
Value
Features
Design
Usability

Big Sound Little Price

May 8, 2014

I was a little apprehensive on ordering this sub box with these subs already in it. All though I am a big Boston Acoustics fan I did it anyway. I figured for the price if I didn't like them I would just give them to my Son for his vehicle. So I hooked them up to a Kicker 11X500.1 mono block amp and they are more then what I was expecting. They will vibrate the whole back area of large SUV.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Hellaflushed

Detroit mi

Overall
Durability
Value
Features
Design
Usability

I'm happy

February 27, 2014

This sub box is a great deal, I'm impressed with the sound quality. For a lower rms rated enclosure this thing pounds. I have it paired with a renegade 850s amp bridged with 4 gauge to the cap and amp and 8 gauge for speaker wire. Would recommend this box to anyone who wants a cost effective box that provides a lot of kick

0 of 0 found this helpful

Help our customers find the most helpful reviews

ProfX

Sacramento

Overall
Durability
Value
Features
Design
Usability

A bang for your buck

September 27, 2013

Fits nicely in the back of my 735i and doesn't ever stop astounding me. It's clarity and power is awesome. Would definitely get another one.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Dan

Brandon, MS

Overall
Durability
Value
Features
Design
Usability

awesome tight bass

August 5, 2012

Bought this to replace my blown bazooka 8024dvc. Man i thought the bazooka hit hard but this little box sounds incredible in my FJ Cruiser. I'm power my entire system with a d class powerbass 5 channel. Bought the whole system from Sonic.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX Speaker Wire (XWS1225)

25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

Your Price $39.99

NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

Your Price $59.99

NVX Sound Dampening Rubber Roller (SDRLR1)

Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Complete Car Stereo Tool Kit, Includes Voltage Test Light, Wire Stripper and More

Your Price $12.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

G110PD

UPC

0690283479374

Weight

59.00lbs

Internal SKU

g110pd

Internal Product ID

36443

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Boston Acoustics G110PD