Expert Service 1-877-289-7664 [Hours]

14th Anniversary Sale--More Products Added

B-52 US-3000

750W x 2 @ 4 Ohm, Professional Power Amplifier; 2400W Brigde Mono

In Stock. Only 1 Left!
|

List price $999.98

$499.99

with warranty

You Save: $499.99 (50.00%)

Arrives by Thursday, Aug. 28 to zip 20147

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock. Only 1 Left!

Arrives by Thu, Aug. 28

Get FAST answers from customers ASK a Question See questions answers

US-3000 Power Amp Features
  • Rugged heavy gauge steel enclosure with sturdy aluminum front panel for stability and increased longevity
  • RMS Power Rating Stereo:
    • 8 ohms: 500 watts x 2 chan
    • 4 ohms: 800 watts x 2 chan
    • 2 ohms: 700 watts x 2 chan
  • RMS Power Rating Bridged Mono:
    • 8 ohms: 1600 watts x 1 chan
    • 4 ohms: 2400 watts x 1 chan
    • 2 ohms: Not Stable
  • High-current toroidal transformers for increased 2-ohm power output
  • 21-position gain control knobs for consistent settings
  • Selectable STEREO, PARALLEL MONO and BRIDGED MONO modes for flexibility
  • Front panel LED display: POWER, BRIDGE and PARALLEL LEDs and SIGNAL, -20dB, -10dB, 0dB, CLIP and PROTECT LEDs for each channel
  • Protection: Short circuit, output current limiting, thermal, DC offset, turn on/off muting, RF protection and circuit breaker
  • Defeatable clip limiters to reduce distortion without sacrificing peak performance
  • Sub-sonic filters to protect speakers and increase headroom
  • Balanced combo XLR and 1/4” TRS input connectors and link XLR output connectors
  • Both binding posts and Speakon output connectors
  • Low-noise cooling fans with continuous variable speed and highly efficient front-to-rear forced air cooling design
  • Replaceable open cell foam air filters
  • Dimensions: 17 1/8"L x 19"W x 3 1/2"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Power Specifications

Number of Channels
This is the number of channels that the professional amplifier is designed to power.
2 Channels
Continuous Power @ 8 ohm
This is the continuous (RMS) power output of the amplifier at an 8 ohm impedance.
500 watts x 2 channels
Continuous Power @ 4 ohm
This is the continuous (RMS) power output of the amplifier at an 4 ohm impedance.
800 watts x 2 channels
Continuous Power @ 2 ohm
This is the continuous (RMS) power output of the amplifier at an 2 ohm impedance.
700 watts x 2 channels
Continuous Power @ 8 ohm (Bridged)
This is the continuous (RMS) power output of the amplifier at a bridged 8 ohm impedance.
1600 watts x 1 channels
Continuous Power @ 4 ohm (Bridged)
This is the continuous (RMS) power output of the amplifier at a bridged 4 ohm impedance.
2400 watts x 1 channels
Total Continuous Power
This is the total continuous power rating (RMS) that the amplifier is able to output.
2400 watts

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

G
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
100 dB
Frequency Response
The range of frequencies the amplifier will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 20000 Hz
Input Sensitivity
This is the input sensitivity of the amplifier.
1.23 volts
THD (Total Harmonic Distortion)
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
1%
Cooling Options
These are the different cooling systems used in the amplifier to keep it cool.
Cooling Fan
Inputs
These are the type of input connections that the amplifier has.
1/4" TRS
XLR
Outputs
These are the types of output connections that the amplifier has.
Binding Posts (Banana Clip Ready)
SpeakOn

Physical Specifications

Height
The height of the item, measured from top to bottom, in inches.
3-1/2"
Width
The width of the item from left to right (side-to-side) measured in inches.
19"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
17-1/8"
Weight (Pounds)
This is the weight of the item in pounds (lbs).
43 lbs
Rackmount Spaces
This is the total number of spaces that the preamplifier will occupy when mounted on a rack.
2U

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

US-3000

UPC

763815125350

Weight

43.00lbs

Internal SKU

us3000

Internal Product ID

38032

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: B-52 US-3000