Massive Audio + JBL Factory Integration Sound Processing Upgrade

Massive Audio RK 6

6-1/2" 2-Way RK Series Component Speakers
Quantity: 2

• 6-1/2" R Series 2-Way Car Speaker Component System
• Power Handling:
  • Peak: 1000 watts per set / 500 watts each side
  • RMS: 240 watts per set / 120 watts each side
• UV protected glass fiber cone
• Butyl rubber surround
• 1-1/8" (28mm) Silk dome tweeter
• Directional tweeter With Multi mountings
• Rugged construction
• Custom pole piece for low distortion and sound quality
• Fully isolated tinsel leads to eliminate crosstalk
• 4 ohm impedance
• High temperature 100% pure copper voice coil
• High flux Y35 strontium ferrite magnet
• Top-mount depth: 2-15/16"
• Cutout dimensions: 5-3/4"
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks.

JBL MS-A1004

400W, 4-Channel Amplifier with Digital Input Mixer and Graphical Status Display
Quantity: 1

• MS Series 4-Channel Class D Car Amplifier
• RMS Power Rating:
  • 4 ohm: 100 watts x 4 chan.
  • 2 ohm: 100 watts x 4 chan.
  • Bridged, 4 ohm: 200 watts x 2 chan.
• Digital signal processing amplifier
• Pulse Width Modulated MOSFET power supply
• Wireless Remote bass level input (MS-WBC remote level control sold separately)
• Built-in display shows tone and gain settings
• Soft Start Turn-on
• 4/3/2 channel operation
• "Hi2" input setting provides factory system amps with output loads, eliminating "speaker disconnected" error messages
• Speaker-level inputs with signal sensing for automatic turn-on
• Preamp RCA outputs to daisy chain multiple amps
• 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
• Digital input-mixer control eliminates the need for Y adapters
• Heavy duty aluminum alloy heatsink for extreme heat dissipation
• CD for system setup included
• Gold-plated RCA level inputs
• Gold-plated screw terminals
• Input sensitivity:
  • Level: 100mV-15V
• Variable high-pass filter (20-20,000 Hz, 6, 12, or 24 dB/octave)
• Variable low-pass filter (20-20,000 Hz, 6, 12, or 24 dB/octave)
• CEA-2006 compliant amplifier
• Frequency response: 20-27,000 Hz
• Dimensions: 8-13/16"L x 7-1/4"W x 2-13/16"H
• 8-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

JBL MS-8

System Integration Digital Sound Processor
Quantity: 1

• System Integration Digital Sound Processor
• Compatible with both factory and aftermarket systems
• Incredible performance improves every measure of audio performance including frequency response, bass performance, dynamics, clarity, detail and stereo imaging
• Simple, step-by-step set-up with the menu-driven calibration based on detailed input from binaural headset microphone
• Perfect for up to 8 channels of audio by producing a flat-response, full-bandwidth signal from up to eight input sources
• Built-in DSP Equalization improves the overall tonal accuracy by automatically compensating for the sonic characteristics of the speakers, electronics and vehicle interior
• Automatic DSP Time Correction ensures that the sound from all speakers arrives at the listener’s ears simultaneously, resulting in the best sound possible
• Sophisticated Crossover Functions give precise, user-selectable crossover points and crossover slopes for up to eight separate outputs
• Logic 7 Surround Processing creates a realistic 5.1 or 7.1 channel surround experience from 2-channel source material
• 31-Band graphic equalizer lets you tune the system to your personal taste
• Preamplifier controls enable complete control over the system volume, subwoofer volume, left/right balance, front/rear fader, bass/mid/treble tone controls, override DSP equalization, time correction, as well as the Logic 7 processing
• Stores up to five custom pre-sets in a favorites setting for easy one-button recall
• The five-line LCD display shows setup menus and the current operation status
• Includes a wireless RF remote to control the menu navigation, volume, as well as mute functions
• CEA-2006 Compliant
• Also found as: JBL MS8, MX8
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

• RMS Power Rating:
  • 4 ohm: 18 watts x 8 chan.
• Max Power Rating:
  • 4 ohm: 30 watts x 8 chan.
• Frequency Response: 20–20,000 Hz
• Signal to Noise Ratio (Line-in/Line out): >90dB
• Signal to Noise Ratio (Line-in/Speaker out): >85dB
• Maximum Input Voltage (Speaker-Level Input): 15V
• Maximum Input Voltage (Line Input): 2.8V
• Maximum Output Voltage (Line Output): 2.8V
• Maximum Current Draw: 16A
• Stand-by Current Draw: <0.01A
• Dimensions: 8-3/8"D x 11-1/2"W x 2-3/16"H

Kicker 09PKD4

Dual Amplifier 4 Gauge Power Installation Kit
Quantity: 1

• Dual Amplifier 4 Gauge Power Installation Kit
• 1500 Watts max
• Direct-connect engineering
• Fewer connections for less signal distortion
• Twisted-pair technology eliminates noise for crystal clear sound
• Hyper-flex cable and wire
• Full spec cable is true to gauge
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

1. 20ft(6.1m) Blue 4AWG power wire
2. 3ft(0.9m) Black 4AWG ground wire
3. 5ft(1.5m) Blue 8AWG power wire
4. 5ft(1.5m) Blue 8AWG ground wire
5. 20ft(6.1m) Blue 18AWG remote lead wire
6. 1 Kicker 09FHS Fuse holder with 150 amp AFS fuse
7. 2 Kicker 09DB1448 Distribution blocks
8. Black rubber firewall grommet
9. 2 4AWG Spade terminals
10. 4 8AWG Spade terminals
11. 1 18AWG Spade terminal
12. Black zip ties
13. Red butt connector

Monster Cable MPC I402 2C-1M

3.28 ft. (1 meter) of 402 XLN+ XTREME Audio Interconnect Cable
Quantity: 2

• Split-Tip Center Pin improves contact pressure and lowers distortion, giving you a clearer signal transfer
• 8-Cut Turbine Ultra-Polished MirrorChrome Connectors maximize surface area and creates higher contact mass for precision signal transfer.
• Ultra-Low Profile Stubby Connector Design for easy installation
• 3-Way Time Correct Windings improve clarity and accurately reproduce amplitude and phase response
• MicroFiber Dielectric isolates individual wire networks for faster transfer
• PEX Dielectric Prevents signal loss and provides more accurate signal transfer
• Duraflex Hexmesh Protective Jacket minimizes friction for easy install
• XLN Xtreme Construction provides protection against interference up to 80dB
• Cable Length: 3.28 ft. (1 meter)
• Color: Silver/Gray
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Cache CBM

40 Feet, Ten 18" x 32" Pieces of Dead Shield Sound Dampening Material
Quantity: 1

• Ten 18" x 32" Pieces of Dead Shield Sound Dampening Material
• Eliminates road noise
• Quiets vibrations
• Stops rattles
• Increases SPL
• Reduces heat
• Easy to form aluminum conforms to desired area of vehicle with ease
• Four step peel and stick design for easy installation
• Increases sound quality and output of car audio system
• Up to 30% thicker than the leading competitors
• 40 Square feet total
• Dimensions (each piece): 18"L x 32"W