Expert Service 1-877-289-7664 [Hours]

Back to School Deals

Precision Power PPI P900.5

900W RMS, Phantom Series Class D Full Range 5-Channel Amplifier

In Stock
|

Get bigger discounts with our bundled Savings: View All Deals!

List price $429.95

You Save: $209.96 (48.83%)

$219.99

with warranty

+ FREE Shipping in US 48

Arrives by Thursday, Aug. 6 to zip 07095

Add an Extended Warranty

SquareTrade Product Warranty
Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Thu, Aug. 6

Get FAST answers from customers ASK a Question See questions answers

Product Features

  • Phantom Series Class D Full Range 5-Channel Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 70 watts x 4 chan. + 270 watts x 1 chan.
    • 2 ohms: 115 watts x 4 chan. + 440 watts x 1 chan.
    • Bridged, 4 ohms: 230 watts x 2 chan. + 440 watts x 1 chan.
  • MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • On/Off circuit delay
  • 5/4/3/ channel operation
  • 3-Way System Protection circuitry
  • Tri-mode capable
  • Band-pass crossovers
  • Input source selector
  • SMT Circuitry
  • Composite double sided epoxy PCB
  • Heavy duty aluminum alloy heatsink for extreme heat dissipation
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Dimensions: 11-1/2"L x 6-1/2"W x 2"H
  • 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
  • More Descriptions Coming Soon!!!!

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

70 watts x 4 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

115 watts x 4 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

230 watts x 2 channels

Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
270 watts x 1 channels
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
440 watts x 1 channels

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
Phantom (Precision Power)
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
5
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

900 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
No
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
High-pass (HP)
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
Yes
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

No

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
77%
4 Star
23%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.8
Value
5.0
Features
4.6
Design
4.6
Usability
4.7
Mr. Audiophile Man

New York

Overall
Durability
Value
Features
Design
Usability
Best Affordable CLASS D 5 CHANNEL AMP for the Money

April 16, 2014

This amplifier and brand is the best kept secret. I knew of this brand since the late 80's early 90. Precision power was been around for a very long time. Precision Power have been on a bit of hiatus over the years. So the younger kid's might not know of this brand when it comes to car amps.This company has a reputation for quality products at the best prices. They were consider a premiere quality brand back then and they seem to be making a comeback on the market. I bought this amp before the Christmas Holidays, I knew, what I was getting before the purchase. I thought it was a price error. But No Folks!!, This is the Real Deal. For this price point; This is a real steal.... Your getting more than your monies worth. It's POWERFUL, CLEAN, SOLID AND COMPACT. It will fit in a multitude of places in your vehicle. I highly recommend this amp. If, you want quality at a low price look no further. The specification speaks for itself!

30 of 48 found this helpful

Was this review helpful to you?

Audio Enthusiast

Dublin, GA

Overall
Durability
Value
Features
Design
Usability
Great Amp!

March 28, 2014

This amp was an awesome buy! Precision Power has been around for quite a long time, so I knew their reputation before buying this amp (always made good stuff).
I put this in my son's car to power his whole system, and the mids and highs are crystal clear along with powerful bass. The remote bass control is good for turning the bass down quickly when the blue light specials are enforcing sound ordinance laws. Who wants a ticket for listening to a little bass ((((( right?

If you're looking for a one amp solution that's clear and powerful, then this is it and the price couldn't be beat. Thanks SE

20 of 36 found this helpful

Was this review helpful to you?

Mr. Audiophile Man

New York

Overall
Durability
Value
Features
Design
Usability
Best Affordable CLASS D 5 CHANNEL AMP for the Money

April 17, 2014

This amplifier and brand is the best kept secret. I knew of this brand since the late 80's early 90. Precision power has been around for a very long time. Precision Power have been on a bit of hiatus over the years. So, the younger generation, might not know of this brand when it comes to car amps.This company has a reputation for quality products at the best prices. Precision Power were consider a premiere quality brand back then and they seem to be making a comeback on the market. I bought this amp before the Christmas Holidays. I knew, what I was getting before the purchase. I thought, it was a price error. But, No Folks, This is the Real Deal. For this price point; This is a real steal.... You're getting more than your monies worth.

This amp is POWERFUL, CLEAN, SOLID AND COMPACT. It will fit in a multitude of places in your vehicle. I highly recommend this amp. If, you want quality at a low price look no further. The specification speaks for itself!!!

19 of 35 found this helpful

Was this review helpful to you?

Craig

Bogalusa, LA

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
GREAT price Great amp.

May 20, 2015

Just installed it puts out all the highs and lows you will need. I'm running 4 pioneer speakers and a pioneer 10" sub (down fire). Sounds great. Black Label Society never sounded better. Recommend this amp highly.

8 of 15 found this helpful

Was this review helpful to you?

P Mac

St. Louis, MO.

Overall
Durability
Value
Features
Design
Usability
Good Amp For The Pice

January 23, 2015

Amp Produces Good Clean Powerful Sound at a good price. Rumor has it that some of the cheaper amps use the same circuit board as the more expensive amps, but then again everything is made in asia now days. Anyway if you are on a budget like me, this is the best bang for the buck. Doesn't produce earth shattering bass, but produces good balanced sound across all frequencies.

19 of 37 found this helpful

Was this review helpful to you?

Nazprerunner

Phoenix,AZ. Hell on earth

Overall
Durability
Value
Features
Design
Usability
Quality 5 channel amp for budget price

June 15, 2015

This amp does pretty well for price and size. it does get hot,I have it under the false floor in the boot of my a4 avant -not vented yet it's driving two sets of morel virtus 6.5 and a nvx 15" at 2ohm sealed box . I have run PPI amps since the mid 90's Skipping many of the not good years of ppi
This was a fall back amp while my other amp is being returned for being partially DOA on arrival- massive audio nx5
I had this running for a 4hr road trip in phx AZ an it didn't shut down do to heat yet
Definitely recommend this amp ,solid built. Only gripes I have are the speaker terminals top screws under a over hang and 1/0 to 4 reducer don't fit in the amp terminal very well

6 of 12 found this helpful

Was this review helpful to you?

MN Bass Heads

Circle pines, MN

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
Nice amp for the price

April 30, 2015

Pros: This amp run nice and clean from what I could see on my scope and by the sound it puts out. The power is great and the sub ch pushes my 600 watt rms sub real good. The amp stays cool but I have a few fans helping it just in case.

Cons: What I don't like was the screws for power, they are a bit hard to tighten because the case gets in the way. I had to find the right size to get in and be sure not to strip the heads of the screws. Also not enough number markings on the settings. I had a hard time trying to set the high pass at 80-90 hz because the lack of markings on the settings. Not hard to figure out but more numbers stamped on it would have been nice. And the last part was the mounting holes to hold it down. You have to use a screw with a small head to fit in the mounting hole, wood screws wont work they are way to wide.

8 of 16 found this helpful

Was this review helpful to you?

Choua

Saint Paul, MN

Overall
Durability
Value
Features
Design
Usability
Great price with plenty of power

September 3, 2013

There are other brands with the same board that this amp uses from NVX 900.5 and polks pa d5000.5, but this PPI have the lowest price and more watts per channel especially the sub channel. I was worried that this amp might cause hissing noise, but nope. Everything sound nice and clear. I have a 4 volt pre out from my pioneer x4500bt and I set it at 3/4 volume which is 30. My gains are at half for all channels. No distortion.

22 of 44 found this helpful

Was this review helpful to you?

sin city basshead

Las Vegas, NV

Overall
Durability
Value
Features
Design
Usability
AWESOME POWER FOR THE PRICE!

March 1, 2015

I bought this amp at first because of 2 main reasons,1 im an old school basshead and owned ppi amps in the early and late 90s and rememeber the good clean power they had in there amps not to mention there reliability,2 I honestly was in need of an amp with a price tag under 250 to put a nice clean sounding system in my work truck which im in 10 -12 hours a day... even worktrucks need a little bass and sq...lol So I ended up buying this amp ,an re audio,10 in sub,and 2 pairs of pioneer 6 3/4 D series coaxials all here at sonic for under 500 bills!....thx sonic:) well i must say with all this an extra set of pioneer tweets, my custom 1.9 cu ft ported box,all ofc1/0 amp kit and big 3 upgrade ,This amp POWERS it all and SOUNDS CLEAN !! I love the small footprint and was shocked how much sound came from this small looking amplifier,this is my 1st time of owning a class D amp so i was a little weary about running my sub at 2 ohms, but not only does it sound clean but it doesnt get super hot either!,I built a little amp rack for it and mounted it under the rear left 6 3/4 speaker on the panel above the rear seat and even after playing it for over 5 , 6 hours straight this amp got warm but never really hot, when it got warm i just opened the rear window above it and it cooled right back down again, never saw it go into protection mode yet:) I really liked the 0 guage adapters it came with too, even though I had to trim my 1/0 wire to get it to fit I was happy I diddnt have to use a distribution block for power or ground,overall I love this amp,for the power and price I got it for im gonna give it 3 stars on durability cause I have had it for a few months now and cant rate durability just yet,but so far im very impressed!

16 of 33 found this helpful

Was this review helpful to you?

Bwit

Las Vegas

Overall
Durability
Value
Features
Design
Usability
Fantastic amp

March 16, 2014

Couldn't be happier with this amp, solid construction, looks great, sounds absolutely amazing, but the best part us the power, I run 6.5 components up front, 6.5 coaxial in the rear and a dual voice coil single 12 inch sub which is paralleled down to 2 ohms. The system truly pounds! I could not belive the power and sound quality.

18 of 39 found this helpful

Was this review helpful to you?

Austin

Chattanooga, TN

Overall
Durability
Value
Features
Design
Usability
Nice Amp for the Money

December 25, 2014

In general, I am happy with this amplifier, and I don't think you can do any better at this price. I wasn't sure about it after initially hooking it up, but after using it for a week and fine tuning, I think it is well worth the money. It is hooked up to JBL front components and a JBL subwoofer right now, so I am not using the rear channels yet, but may add rear fill speakers in the future, which is why I got the 5 channel. You will not be disappointed with this amp. Also, I love how easy a 5 channel amp is to install instead of multiple amp setups (No distribution blocks!)

Pros:
Price, features (Subsonic filter, LPF, HPF, Bass knob, etc.), looks nice, sounds great, doesn't run hot at all (just barely gets warm so far, and I am running at 2 ohms)

Cons:
Not CEA-2006 Compliant, but it seems to provide enough power

15 of 34 found this helpful

Was this review helpful to you?

Herman Rodstrong

Elkridge, MD

Overall
Durability
Value
Features
Design
Usability
Nice Class D amp, good value, rated power

October 27, 2014

After a couple weeks of research I decided to pull the trigger on the PPI 900.5 amp. I am using this amp to power JL Audio C2-650 components in the front, C2-650x coaxials in the back and a 12" Infinity Kappa 120.9W sub in a 1.0 cu/ft sealed enclsure. The speakers are 60 Watts RMS and the subwoofer is up to 350 Watts RMS, which makes this a nice amplifier to power this setup. At first I was a little skeptical about going with a PPI amp as opposed to an Alpine, JBL or Kicker amp, but I trusted all of the reviews I read online and I am glad that I did. The PPI amp is at least $100-$200 cheaper than comparable amps from the brands I mentioned and even though I can't compare this amp directly to any of the other amps, I can say with confidence that this amp is well made and does rated power. My only issue with this amp is that the frequencies on the crossovers aren't identified (for example, 80 Hz isn't labeled) so this makes it difficult to tune. That being said, at this price point I am willing to make that concession.

16 of 38 found this helpful

Was this review helpful to you?

Jared

Birmingham, AL

Overall
Durability
Value
Features
Design
Usability
Best 5 Channel Amp for the price.

February 8, 2014

I spent a few months researching, asking questions to dozens of people who were "experts" in car audio online and elsewhere about Speakers, Amps, etc.. Most of what I had initially had in mind changed after their input. One resounding recommendation was the buy the PPI Brand amplifier. Low or Medium high budget.. everyone liked the quality.

I originally was going to buy a PPI 900.4.. but at the last minute found the PPI 900.5. In my car (350Z) I have four 6.5" speakers.. and the front 6.5" speakers are in the doors low.. and the tweeters are in the panels by the windows (components factory).

So I needed something to power 4 6.5" speakers with 1" tweeters (aftermarket) that ran 70-80watt RMS per speaker and MY choice on the Sub was a JL 10" sub that ran at 300Watts RMS.

The PPI 900.5 was about as close as you could get to these needs (but don't be afraid to buy MORE amp than your speakers require (you set the gains remember).

I was hesitant about a "Class D" amplifier to begin with.. having always used Class A/B.. but I went with about a dozen recommendations and bought it.

I've since installed and wired the whole car myself.. and am 10 times over more impressed than I ever thought I would be with this setup -- and the Amp drives it all.

A cheap/bad amp gives unclean power and you hear that.

I have supreme Sound Quality.. incredibly SPL .. with Clean Mids, Bright (but not overly bright) highs.. and the 10" Sub is in a Sealed custom box for the vehicle at .66 Cubic Ft,.. and this amp drives it very, very well. It's tight, quick response bass -- but if I'm watching a movie on my DDX470's DVD player, it's like being in a Movie theater with the rumbling bass etc.

Bottom line -- Don't hesitate if this amp meets your power requirements.

16 of 39 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

Belva BAK46 6-Channel 4 Gauge Amplifier Installation Kit

Complete 6-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

Your Price $57.95

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $79.99

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

Get all you need including wire cutters to upgrade your power and ground wire.

Your Price $151.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $39.99

StreetWires FB4

4 AWG / 4 Gauge Firewall Bushing

Your Price $6.95

NVX XDBU4 - Top of the Line!

Distribution Block with Two 1/0 or 4 AWG Inputs and Four 4 or 8 AWG Outputs

Your Price $17.99

Stinger SI4612 4000 Series Interconnect Cable

12 ft. 6-Channel 4000 Series Audio Interconnect Cable

Your Price $23.99

Stinger SI4617 4000 Series Interconnect Cable

17 ft. 6-Channel 4000 Series Audio Interconnect Cable

Your Price $41.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1250 Speaker Wire

50 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $29.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $13.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

Scosche SPL Meter SPL1000F

Handheld boomSTICK measures your SPL range from 60 to 135 dB

Your Price $21.99

Browse 8 questions and 28 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
Good reviews. Had the specs i was looking for and it is highly recommended on a certain forum. Very good price.
DAVID D on Jun 6, 2015
Heard good reviews on it, decided I would give it a try
Seth W on Apr 2, 2015
Great amp, small footprint and strong clean output.
ANDREW I Z on Apr 19, 2015
Great reviews and previous experience with Precision Power sound quality
John M on Feb 16, 2015
How soon will Precision Power PPI P900.5 be in stock?
A shopper on Aug 8, 2014
Best Answer: Hello,

At the time of this message, it has been reported to that the Precision Power PPI P900.5 is on a Manufacture's Backorder Until AT LEAST Late October.
Reply · Report · Customer SStaff on Aug 12, 2014
· Add Answer · I Have This Question Too (4)
Can I the 4 channel at 4 ohm and the subwoofer at 2ohm with this amp?
Chris S on Oct 15, 2014
Best Answer: Yes absolutely. I have the 4 channel half running at 4 ohms on all my 6x8s and the sub channel is at 2 ohms on my two 12s and it barely gets warm. I've run it hard everyday since April with no issues.
Reply · Report · Adam B on Oct 16, 2014
· Add Answer · I Have This Question Too (0)
I have four punch 6x8's and a punch p1svc4ohm 12". Will this amp do the trick? I currenty have a prime 250.4 running the 6x8's and they don't sound too good. The p1 is extra from another setup not currently being used. I would like to just use a one amp setup.
Jason L on Dec 21, 2014
Best Answer: it may have been wise to purchase a dual 4ohm voice coil sub so you could wire it parallel bringing the ohm load on the amp down to 2 ohms. that way you would have achieved 440 watts at a 2 ohm load instead of 270 watts at the 4 ohm load you are left with now. not sure where/when you purchased your other equipment, but when planning a system it is always wise to think ahead, map it out, and really contemplate how all of your components are going to interact and work together. that being said, your sub is only rated at 250 watts RMS, thus running it at 4 ohms should be just fine, in fact, even preferable since it should have a little less distortion and will be easier on your amp (and it will run cooler). you could probably get away with running two of the subs you have (2 single 4 ohm drivers can be wired parallel into a 2 ohm load). the RMS rating would be 500 watts, and you'd be pushing 440 but that's just fine. Again, it will push your amp a little harder, but this amp is up to it. trust me. I am running a 10" 4 ohm DVC Kicker L7 and that is rated at 600 rms…. and it sounds amazing.
Reply · Report · diana f on May 22, 2015
· Add Answer · I Have This Question Too (0)
how do I connect 4 gauge wire to amp?
Jim W on May 22, 2015
Best Answer: from what I remember, the amp comes with a 4 gauge adapter that plugs into the power, ground, and remote using gold plated posts. This adapter looks like a three pronged block that you then use to plug in 4 gauge power and ground and your remote wire, which remains its standard 18-22guage size. This amp is amazing, i could not be happier.
Reply (1) · Report · diana f on May 22, 2015
· Add Answer · I Have This Question Too (0)
How do I run a 4 ch amp and a 2 ch amp off of only 2 RCA outs from my head unit? I have a clarion m502 and want to run a PPI P900.4 for my 4 cabin speakers and a PPI P600.2 bridged for my subwoofer.
Longdrive on Aug 10, 2014
Precision Power P900.5
Precision Power P900.5
Clarion M502
Clarion M502
Precision Power P900.4
Precision Power P900.4
Precision Power P600.2
Precision Power P600.2
Best Answer: Hey Darin, first you need to get two 1-male to 2- female connectors(http://www.sonicelectronix.com/item_45066_NVX-XIN2F.html) and attach them to each of the rear RCA cables on the rear of your Clarion head unit. Next you will connect your P900.4 to the front channel like normal, and connect it to the rear like normal, only you will now have 2 extra RCA cables left that you will use to connect your 600.2 with. I hope this is clear enough to answer you question
Reply · Report · Brandon R on Aug 10, 2014
· Add Answer · I Have This Question Too (0)
Does anyone using this amp have the need to use a farad cap? I have a 2.0 farad cap I bought for another vehcle that I never got a chance to use, and was wondering if anyone had the need to use one with this amp.
A shopper on Apr 10, 2015
Best Answer: Hello,

We just wanted to chime in with a quick note. Your question is far to relative to get an answer that is going to suite your application. There are way to many variables involved and no install will be like yours. With that said, we hope you are asking if the Amplifier has the need for the Cap, not the Vehicle. A vehicle doesn't benefit from a Cap, the amplifier does. It just so happens that a vehicle will sometimes benefit from the caps ability to hold a quick burst of energy and so forth. Nevertheless, it is unlikely that your vehicle , unless a very small one, will lack the power needed to run the amplifier. If you fear it does have that lack, then upgrade the battery, don't add another load in the form of a cap. Keep in mind, the vehicle will need to recharge the cap AS well.
Reply · Report · Rick MStaff on Apr 12, 2015
· Add Answer · I Have This Question Too (0)
I purchased the PPI 900.5 on 5/27/15 I installed on 6/22 I used Stinger RCA Interconnect Cables from the HU to the amp for the 4 channel output and the sub output all the 4 channels work, but the sub channel you can barely hear. I double checked all the connections everything is ok. I previously had a PPI S320.4 Sedona amp that I used to bridge 2 channels for the sub and it works fine. Is there something with the 5 channel amp that I am not doing correct? Thanks for any answer.
bob f on Jun 23, 2015
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

P900.5

UPC

709483038202

Weight

7.50lbs

Internal SKU

p9005

Internal Product ID

38339

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Precision Power PPI P900.5

  • Precision Power Phantom Amplifiers
  • How to Install a Car Amplifier